Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Operating any kind of heavy equipment is assumed to be a difficult task and construction companies believe none other than the experienced lot that they have when it comes to working a track loader. This means that the newer lot will get less exposure to it. Well this is not the case though as far as large construction companies are concerned. They prefer both experienced and inexperienced operators to work on track loaders. It is quite obvious that a company has to shell out more for an experienced guy than they have to pay for a newbie. Keeping that in mind, they prefer training the new guys under the older ones so that they get maximum exposure and learn to operate the tracker on their own. Other than that there are so many training videos that one can have access to that will help a trainee learn from it. All you need is an internet connection to make your life simple. The practical part can be achieved only at the jobsite.

Knowing the functions is crucial:-

A track loader comes with various functions that are meant for different purposes. An operator should be aware of all those functions and should also understand to use which function at what time. That is perhaps the most crucial part of his job. Every other switch or lever or a joystick that one can see inside the cabin is there for a specific purpose and it is important to know the different functions of those mechanisms. This is the first step forward to learn to operate a track loader.

Move the bucket well before you begin your day:-

One should primarily start his work by first checking if all the functions of the machine is in order. So start the engine and try to move the machine a bit. Check if it is moving smoothly. Other than that, try to move the bucket using the levers inside the cabin. You will ideally not find the levers in a rough state but the problem lies more on the execution part. You must have pressed the lever to move the bucket but it just does not move or it does move at a very slow pace. You should keep this into consideration before you begin your day’s work. Also check the brakes are in order. Try applying brakes after moving the loader at a medium speed. This will let you know the exact condition of the brakes.

Undercarriage and the tracks are an important component:-

The undercarriage and the tracks are perhaps the most expensive component in the machine and also that it gets deteriorated after having worked for just 800 hours. When you are working in rough conditions the chances of the tracks to get ruin increases tremendously. This is something that you got make note of while you are operating the machine. It is not a tough job to operate a loader. It is just that you got to keep few things into consideration while you are working on it.