Category Archives: dozer

Utilize Caterpillar D3 Bulldozer for Agricultural Land

Very often, the word ‘bulldozer’ is used in the list of heavy equipment but actually it falls under the category of tractors. Many of the farmers are unaware of this fact and think D3 dozers as the heavy construction equipment. This piece of writing will make them understand the benefits of D3 in farming applications. Nowadays, Caterpillar D3 bulldozers are used by the farmers to develop the fertility of the land.

Factual Information about D3 Bulldozers

D3 bulldozer is often recognised as D3 crawler tractor that is employed to shift land, echelon land and for destruction. The engine of the D3 dozer has 5.2 litre diesel in it. This motor has the capability to produce maximum 62 KW of horsepower. The diesel tank has the capacity to hold 30.1 gallons of fuel. It has the competence to hold an utmost freight of 13,980 kg. This bulldozer runs in the speed of seven miles per hour. There are three gears in the front side and one gear in the opposite side of the bulldozer. When the dozer blade is fitted in the device, its total length is 12.1 feet and without blade, its distance end to end is 9.1 feet. The customers get the helm track in the size of 6 feet and floor clearance of 1 foot.

Security Tips for Bulldozer Users

  • The trained bulldozer drivers should go through the manual section before using the machine. The test drive is must for them so as to avoid accidents.
  • The mechanical back up alarm helps the bulldozer driver to call the workers in the site in emergency. The volume of this alarm is so loud that it can be hear from any corner of the site.
  • It is very important to know for the bulldozer operators that whenever they have to refuel the machine, it is sensible to shut off the engine.
  • The rollover protection structure (ROPS) attached in the bulldozer help the drivers to run the crawler safely.
  • It should be necessary to wear hand and foot hold safety tools whenever there is a need to mount over the parts of the machine.
  • Always employ overhead security whenever there is a need to use bulldozer on a high altitude material.
  • The bulldozer machinists should always be conscious if they have to use it near a trencher or an excavator.

Procedure to Make a Road Using a Bulldozer

The workers should cut down the big trees that are in the lane before they utilise dozer. It is advisable to the bulldozer drivers that never use crawler to curb out the large trees form the ground. With the blade of the bulldozer, thump the remnants and thrust them away so that it will not create an obstruction on the path of the bulldozer. The bulldozer helps to swell the gravels on the road.  When the pebbles are compressed by the bulldozer, it gives a smooth appearance and never washes out in stormy rain.

Importance of Armoured Bulldozer in Battle Ground

Universalized in 1920 and utilised profoundly ever since, bulldozer is an incessant tracked tractor that falls under the category of heavy equipment. It is a crawler that is bedecked with a sizeable metal platter. The application of the bulldozer is to shove a large amount of soil, debris, sand or other construction materials. Very often, laborers recognize this heavy equipment as a dozer. It is a crawler that is assembled at the rear with a claw-shaped mechanism. This apparatus is known as ripper that is applied to slacken the thickly condensed substances. Armoured bulldozer is a fundamental contrivance of battle engineering.

Use of Armoured Bulldozer in World War II

The British were the first to employ armoured bulldozer in World War II. The soldiers used stereotyped Caterpillar D8 Bulldozer that was adjoined with armour. It helped the bulldozer drivers to protect themselves and the engine from the attack of the enemies. At that time these armoured bulldozers were manufactured by Jack Olding and Company Ltd. The British soldiers referred these bulldozers as “Hobbart’s Funnies”. In the Battle of Normandy, the armoured bulldozers were used to clear the incursion beaches of hindrances and to create roads. When the military persons reached Europe, they realised the need of Centaur bulldozer. This bulldozer was very much effective in battle grounds for instance in Korean War.

Modern Use of Armoured Dozer

Some of the eminent contemporary bulldozers are Caterpillar D7 and D9. These dozers are bedecked with the tanks that have blades. Some of the attributes of current toughened bulldozers are as follows:

  • Caterpillar D9 bulldozer is used in military as wells as construction purposes. It is chiefly utilised by Israel Defence Forces and United States armed forces. This bulldozer has the capability to bear up profound attack.
  • The modern dozers have the power of 405 to 410 horsepower.
  • The drawbars pull capability of this updated bulldozer is 71.6 tonnes-forces.
  • The D9R bulldozer can be operated by two crew members.
  • The armour kit installed in the IDF modified bulldozers defends the motorized system and the compartment of the operator.
  • The bulletproof casement of the IDF bulldozers protects the engine and the bulldozer machinists from the machinegun, sniper blaze and grenades.
  • The RPG rounds can be averted by the slat armour. Sometimes the D9 bulldozers are available with the attributes of smoulder projectors, grenade installers and crew-functionalised machine guns.
  • D9 bulldozers are mainly utilised in excavating moats, saving stuck, glade landmines, accumulating sand blockades etc.
  • The Palestinian soldiers used these D9 bulldozers to open secure path for IDF armies.
  • These bulldozers are also employed in cleaning bushes and structures.

Application of Armoured Bulldozers in United States

The US armies bought Tractor Protection Kits (TPK) from the Israel Military Industries at the time of first Gulf War. They used it in their Caterpillar D7 bulldozers. These are significantly utilised in mine cleaning purposes. D9 bulldozers are operated by the US soldiers to destroy the vehicles from dig channels and roads.

 

 

Use Caterpillar D10 Bulldozer with Elevated Drive Sprocket

Have you ever operated any Caterpillar bulldozer product? If ‘no’ then this article will definitely help you to make understand the importance of Caterpillar D10 bulldozer. Bulldozer is a type of crawler that is mainly found in heavy industry factories, construction sites, mines, and farms. It is bulky and potent trailed heavy paraphernalia. The tracks help the bulldozers to hold the ground tightly in the jagged topography zones. Caterpillar D10 bulldozer is mainly employed in the mining and construction sites. Here, the labourers and the miners come to know the applications of efficient D10 bulldozer manufactured by Caterpillar Inc Company.

Antiquity of Caterpillar D10 Bulldozer

The first model of D10 bulldozer was D10X1 that was presented in the year 1973 in the business meeting of Caterpillar Inc Company. This mechanism was invented due to the need of a large tractor. Within some years, this Caterpillar D10 was popularised in the whole world and the East Peoria Plant of Caterpillar Company produced 1000 D10 bulldozers in between the year 1977 and 1986. At that time, a large number of heavy equipment manufacturing industries of different nations tried to build competent bulldozers just like caterpillar D10. Some of them are D455A, Fiat Allis 41-B, Con Expo 69 etc. Later the invention of the N-series tractors downgraded the demand of D10 dozer. For this reason Caterpillar company replaced D10 bulldozer with D11 N.

Structure of Caterpillar D10 Bulldozer

Some of the structural features of this D10 bulldozer are as ensues:

  • The power capacity of this dozer is 700 horsepower (520 KW).
  • The customers can get the facility of 19 foot U-blade tool with this dozer if they order it at the Caterpillar Inc Company.
  • Earlier the U-blade attached to this dozer was available in the weight of 82,000 kg but nowadays the modern blades are obtained in the weight of 86,000 kg.
  • The conventional U-blade was 7 feet high and has the capacity to ram the soil up to 35m.
  • The modern D10 bulldozers are used in 777 off-highway dragger.

Benefits of Elevated Sprockets in D10 Dozer

  • The elevated sprockets abolish the final coerce structure.
  • Inclined to frequent failure is another attribute of lofty sprockets.
  • This sprocket is constructed in modular shape.
  • It helps to smash down the tracks and eradicates constrain sprockets easily.
  • The modular design of the sprockets helps in removing the diffusion from the rear.

 

Chief Qualities of Updated Caterpillar Dozers

  • The Caterpillar bulldozers proffer additional facilities to the customers like engine efficiency, cost diminution and recuperating workers.
  • The financial system of the fuel is improved by the fans and the eco-operating form of Caterpillar bulldozers.
  • The cab enrichment quality gives the bulldozer machinists to stay in comfort and safety cabins.
  • The productive feature of the machine increases because it is supported by the electro-hydraulic, authentic power trains and committed hydraulic tools.

Additional facility of adaptable undercarriage enhances the quality of the Caterpillar bulldozers. In the early years of 1970, Seal and Lubricated Track (SALT) system was pioneered by Caterpillar Inc Company and still this technique is famous in heavy equipment manufacturing organisations.

 

 

 

 

How to Operate a Dozer? Get To Know the Basics

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Are you just about to make a foray into the construction industry? If yes, then the very first thing that you will probably want to do is getting to know about the various heavy construction equipment that from now on are going to be your companion for a major part of your day. And among the many heavy equipment that rule the construction fore, nothing is perhaps as significant as the dozer.

Dozer- An Essential Part of the Construction Industry

Perhaps the very first thing that you would want to know is what is a dozer all about? Short for a bulldozer, the dozer is perhaps the most commonplace earth moving equipment that is there on the block. Primarily consisting of a secure coop for the drivers, tracked chassis, a ripper claw at the back end and a number of front mounted blades, that the dozer makes use of in order to push the soil ahead.

Operating a Dozer- Getting To Know the Basics

Now comes in the next question- how are dozers operated? Well, the very first thing that one needs to understand in this context is that operating a dozer is quite complicated and should be entrusted to people who are well trained in this aspect. However, it is best to be aware of the basics before setting foot in the arena.

  • A majority of the controls are devised in such a manner so that they are able to operate the tractor; only one of the controls is devised to control the blade.
  • The operator would do well to be ready to bring the dozer to a halt any time after turning on the ignition.
  • You will have to make use of the joystick, usually on the left in order to make the bulldozer move in the direction that you want. You will also find a joystick to your left, primarily meant for controlling the blade.
  • The operator needs to lower the blade till it touches the ground, following which the joystick has to be operated in a manner so as to scoop
  • The joystick has to be manoeuvred in such a manner so that the blade is lowered and it touches the ground. The controls will then have to be moved in such a manner so that it successfully scoops a certain portion of the earth and leaves a flattened surface behind.
  • If the operator is new in the field and has just started off, it would be better if they do not run the dozer on a slope or a steep area. It would also do well to work on a piece of land that is not as important so that the operator can get used to the mechanisms of the dozer.

If you are in charge of the construction site, it is your responsibility to ensure that the operator hired by you is well up to the mark as operating a dozer is a tad bit complex job. However, there is nothing that cannot be simplified with the right kind of approach and training.

Related articles across the web

    Choosing The Right Piece Of Heavy Equipment To Do The Job

    Podcast: Play in new window | Download | Embed

    Subscribe: Apple Podcasts | RSS

    Though construction industry is one of the industry that has the capability to generate good returns within a couple of years from the inception of the business and in order to ensure a successful business, one needs to know the in and out of the business and the equipments attached to it. It would be rather unwise of an individual to directly jump off into it without knowing the intricacies of the trade and then end up burning his fingers. Construction business is not rocket science and one doesn’t have to slog his entire day learning the tricks of the business. He only needs to make sure that he is learning everything that he gets to know on a daily basis. Apart from the knowledge in successfully running the business, one thing which also plays a crucial role in shaping up his business and responsible for its continuous growth is kind of knowledge he has on heavy equipment.

    It is important to understand that not all heavy equipment can be used to perform every kind of activity. Though some machines are made to multitask, however this is not a thumb rule and it is not mandatory for every machine. Some equipment is good doing the core thing for which they are produced and are better not used for anything else. Therefore it becomes very critical to understand the role of the equipment and use them for purposes they are exclusively made for.

    How can one choose the right piece of heavy equipment?

    This one stands to be a very valid question as one may confuse himself in mid of several options available in the market. In such a situation, it becomes prudent for the individual to either do an extensive course on heavy equipment where he will be given a basic understanding on heavy equipments and can also know the specific role of the machine before buying it.

    This option may not sound prolific to a person who has a set business and can afford a technician who will guide him on the equipment. For such businessmen, it is recommended that they hire a professional who will do a thorough study of his business and the type of projects that are progressing under his banner. Only after understanding his projects, he may recommend the heavy equipment he needs to buy. The other benefit in hiring such a professional is that they can guide you from which heavy equipment manufacturing company you should be buying your equipments. It has been witnessed that the most difficult decision to make is to select the best brand. The suggestion of a professional would be quite handy for you to take a decision.

    One can also make use of internet to know what heavy equipment he should be using for his project. However, this may not be as effective as hiring someone to help you take a decision. In a nutshell, things will be in better control if you’ve the right equipment to get the job done.

    Related articles across the web

    SU Blades vs. 6-way blades on a Dozer

    Podcast: Play in new window | Download | Embed

    Subscribe: Apple Podcasts | RSS

    Bulldozer or dozer is specifically a crawler or continuous tracked tractor which is essentially used for pushing a huge quantity of either soil, rubble or sand or any other heavy or bulky material from the construction site. The machine has multipurpose utility and can be used at various sites as for military bases, mines or in heavy industry or in farms or at quarries. The multifaceted dozer has rear ripper in the shape of claw that can rip through materials and thus makes it easy for carrying or shifting from one place to another.

    What are SU Blades?

    Basically, dozer blades on the front are of different types and according to their shape and purpose, they have been classified.

    1. S-Blade—This is the straight blade that is short without any lateral curve. These do not have any side wings and are essentially used for fine grading.
    2. U-Blade—This is the universal blade with curved and tall design. Unlike S-blade, it has large side wings which are used for carrying heavy or loads of materials.
    3. S-U Blade—As the name suggests it is an amalgamation of the two but is shorter and does not have as fine curve as U-Blade. Comparatively, the side wings are also shorter.

    .

    What are the 6-way blades?

    The 6-way blades are a bigger track dozer and are used for lifting and doing much bulkier work. Ways signify that blades can be moved in various directions like it can go left, right, upward, downward, tilt and curve. The ways define the movement of the blade. For intricate and finer work, one can choose to dozer with better efficiency. 6 ways basically defines the size of the dozer and the capacity. If someone has loads of work to do, then one can opt for bigger frame and much efficient machine. It is the cylinder and the horse power which actually measures the efficiency and weight of the machine.

    SU Blades vs. 6-way blades on a Dozer

    The 6 way blades can either have S type or U type or S-U type blades. The blades make dozer sharper and give it a better edge to crawl through the terrain and clear the way whereas 6 way blades increase the functioning capability of a dozer. The increased number of blades gives better mobility.

    This is the main difference between the two. Various companies make dozer which is either light or heavy and depending on the work, one can make a smart choice. To know more about a dozer, it is best to make a comparative analysis of the different model that can give a vivid idea on the bulldozer and be cost efficient.

     

     

    Operating A Dozer Is As Simple As Driving Your Own Car

    Podcast: Play in new window | Download | Embed

    Subscribe: Apple Podcasts | RSS

    If you think that in order to operate a dozer, you need to take some very special training then you probably have to change your thoughts. It may require you to take some level of training but it is definitely not as rigid or complex as taking a space shuttle and flying away in the space. It may sound to be little complicated but the process is quite simple and easy to understand. At the end, you may find it as simple as driving your car. Few things that are important is to understand the intricacies of the equipment and once you know the in and outs of operating the dozer, it would be nothing more than a cake walk for you.
    Things that one should consider learning in order to operate a dozer
    Knowing more about the machine:- If you want to be a good operator, it is of due importance to know well about the machine. You should know the utilities of various switches inside the cabin. They may be for various reasons and as long as you do not know them all, you may not be able to make optimum utilization of those switches. It may also extend the period of a work assigned to you which will ultimately affect your productivity and may also incur loss to the company. Other than this, not knowing the various functions of the dozer may also lead to accidents and unwanted casualties. No company would ever want these things to happen and therefore, one should learn everything possible about the dozer they are working on.
    Get some basic training:- Due to technological changes happening every other day, new model are coming up in the market. These models more or less have the same functions. However, the manufacturing companies try to add few more features to make it look more user-friendly and therefore also attach a higher price value to it. It is because of this reason that the operator should get some basic training in understanding those extra functions and that he can incorporate them in his day to day activities.
    Buddy-up under an expert:- You learn well if you learn it from an expert. Operators who have been in this industry for years may have worked with all sorts of machines and therefore are quite competent enough to train young guns. They may teach you many things as to how you can operate a dozer and may also share few of their experiences which may help you under a given situation. The knowledge they have gained all over the years will help the trainees fetch more benefit than any other book can ever provide.
    Check the web:- You can also take help from internet to know how you can operate the machine. You can go to youtube and check live demonstration. This will give you a better picture of how you can operate the same stuff all by yourself. Though this is useful, you still will get to learn more from physically working on the dozer.

    How to buy a used bulldozer?

    Podcast: Play in new window | Download | Embed

    Subscribe: Apple Podcasts | RSS

    Whether it is for shoving the soil of your land, or to level the ground, the heavy mechanical equipment that is required is the bulldozer. This vehicle has blades attached to the frontal part and there is a ripper at the rear part of the vehicle. For quarrying or for mining, this heavy equipment or vehicle works wonders. The bulldozers are quite expensive to afford. However, if you need one, then buying a used bulldozer is a very intelligent task, as it comes at quite a cheap rate and also there is no problem in the availability of the second hand bulldozers.

    Although you will think that you are going to buy a second hand bulldozer or a used bulldozer, so you can simply buy the one that comes in your budget, but this is however, not the right thing to do. Even the used bulldozers also cost you a lot, so finding the best available equipment is a tricky task altogether.

    How do you choose the best among the used bulldozers?

    • The first thing that one must do before buying a used bulldozer is to find a Dealer who is reputed in offering the best heavy mechanical equipment. There are many dealers and websites who are very efficient in providing the customers with the best used bulldozers.
    • The next thing that the customer must check while buying a used bulldozer is the condition of the equipment. The time period for which the vehicle has served and the age of the bulldozer is to be noticed carefully. The less the vehicle has served is the more it has life.
    • The pricing is the next factor that should be taken care of. If a vehicle comes at the cost that is beyond your budget, then it is definitely not the choice of equipment that you would want to buy. However, if you get to notice that by spending a bit more than your budget is letting you the opportunity to buy a used bulldozer that is in all conditions far better than the one that comes in your budget, then buying the better one by spending more than your budget is quite a good idea.
    • The next thing that must be taken care of is that when you choose a used bulldozer for yourself, you have to make sure that the equipment has not faced any damage in its history. If the equipment has encountered a servicing, then it is very obvious that you will end up inviting trouble to your home by buying a lame horse.  (Ask to see service records)
    • The most important of all factors that one must keep in mind before buying a used bulldozer is that one should not buy a used bulldozer when the papers and all the necessary documents of that vehicle are not ready.

    A good customer service and service centre that serves all the problems related to the bulldozer should also be kept in contact. Buying a used bulldozer by following these tips is the best way to cut short your bulldozer buying expense.

    Shield Your Heavy Equipment From The Deadly Winter

    Podcast: Play in new window | Download | Embed

    Subscribe: Apple Podcasts | RSS

    Winter is welcomed in many parts of our country but in some parts, it is indeed a pain as one has to go through a good deal of trouble to protect themselves from the ferocious weather. It is just not for us that this season comes with pain but also for the construction segment as a whole. Imagine in cities where it snows for most of the time in the year, winters are just deadly. Folks from the construction domain are more worried about their heavy equipment as this season not only dampens their business but also the working capability of their machines. It just takes away the power from the equipment leading to enough complication once the weather changes. This leaves them with a damp business and few rotten machines. Though, the equipment can be fixed, it takes time to get them back on their toes.

    What should one do to winterize their equipment?

    The owner of the construction equipment needs to follow some very basic principles. The first would be to lubricate the machine before the start of the season. It would be practically impossible to do the lubrication thing once it starts snowing. No one can dare to deal with the machines in such a rough weather. Therefore, it would be prudent to do away with the oiling and maintenance stuff at the very beginning and before you start feeling the cold breeze swaying your cheeks.

    Winterizing your equipment begins with checking each point of your machine that you feel should be lubricated. It would be wise if you prepare checkpoints before you begin working with it. The checkpoints will help you identify the various points in the machines that you need to work on. As you keep completing the work, keep ticking the checkpoints. This will ensure that you leave nothing behind and have taken care of everything mentioned on the list.

    Get a good mechanic to get this job done

    One of the most important steps towards shielding your construction equipment from winter is to get the overall machine checked by a good mechanic. It may not cost you much to hire an experienced mechanic who knows the in and out of the equipment and knows what needs to be done to protect them from winter. If he finds any part of the machine to be faulty, that should be replaced immediately. There are instances where the equipment owner gave the job of winterizing the equipment to the operator and they with their limited knowledge tried doing everything possible to prevent the machine but eventually, it took its toll. The machine weren’t working with the beginning of the next season and the owners were left puzzled. Had they given the work to an expertise, things would have been favourable to them.

    Once you are done with the repair job, the next thing is to store the equipment in a cool and dry environment. It should not be exposed to outside climate or else it might develop complications.

    Following these steps will ensure a safe winter for your heavy equipment.

     

    Looking To Rent Your Equipments In Texas – It’s A Must To Read This

    There are times when we all go through a sluggish period and do not have much work in hand. At this juncture, we not only have to manage the recurring costs to keep the company going but also have to ensure that the heavy equipments that are lying idle are well maintained. We can’t just let them rust for doing nothing. Therefore, the maintenance adds up to the cost making things all the more difficult. Under this situation, it is wise to simply rent the equipments to someone who is in need of them and can also afford to pay the rent that you want.

    Renting heavy equipment may sound complex but in reality it is pretty simple to do so. You only need to find the right guy for your machine. We may be a bit apprehensive with the thought that the person using it may not care for it and that might lead to the machine getting wear off in less time than it should have. Well, these are just apprehensions and things can always be worked to set them in the right place. For instance, you can rent the machine to someone you know or if at all you’re giving it to a stranger, you can make an agreement where you can state that you may do an inspection of the equipment after every quarter and if you find that they are misusing the machine, you have every right to cancel the agreement and take your machine back.

    One of the simplest forms of renting the heavy equipment is by posting it on internet. For the ones living in Texas, there are several sites which can connect them with the prospects. These websites work as an intermediary between the giver and the taker. In order to post your stuff on their websites, you have to first register with them. There may be an annual subscription fees that they may charge you for your services or may bill you for only listing the item on their website. The fees may differ depending upon the price of the equipment. Higher the price of the item more would be their fees. You have to update your credit card information on their website and then are post the equipment. It also gives you the privilege to monitor the number of prospects who have visited your item and if needed you can also communicate the prospect or vice-versa.

    If you find a party who is interested in your equipment, ask them to pay a visit at your place and if they want, they can check the equipment to ensure that it’s working. Once they are content with the stuff, you can draft an agreement and can ask them to credit the money in your bank account.

    You can also opt to advertise in a local newspaper that is widely circulated all over Texas. You may find some success in that as well. However in this modern age, it is recommended to post things on website as that may give you more and better responses.