Category Archives: dozer

Simple 3 Tips To Maintain A Dozer

Prevention is always better than cure. Steady and éclat maintenance are key factors to keep the dozers in optimum condition irrespective of the age of the equipment, geographical and weather conditions. Age is the most important thing which acts upon the performance of a dozer. . If you have purchased a used dozer, you have to take extra care. As a used dozer has undergone wear and tear for many years, its level of performance automatically stoops down.

You may have faced problems with the performance of your used dozer many times and at the same time, you cannot stop using this equipment as it plays a major role in a construction site. So, why not maintain spend some time in maintaining your dozer properly? After you read this short article, you will realise how easy it is to keep up your dozer’s proficiency.

Tips to maintain a dozer properly

  • Checkups for steady repair: – Regular checkups of the dozer are essential to ensure a fine working condition. You should change the oil and other fluids in a systematic interval. If you keep your dozer in extremely wet climatic condition, it will damage more quickly. It is because rust will form rapidly on the important parts of the machine. In case of used dozers, the chains, bolts and the undercarriage should be checked to detect the damaged parts.

 

Checking helps to increase the life span of the constructional equipment. If you find any defaced part, immediately repair it with the assistance of a skilled technician. To avoid any kind of damage, don’t forget to use appropriate tools while checking. You should also put on Hard Hat and gloves while going through the machine.

  • Cleaning of the track frame: – To work in muddy conditions especially in winter freezes the mud on the track frame of the dozer. Therefore, you cannot ignore cleaning off the mud while the equipment is still warm. Use a track spade which perfectly fits into the gap between the track and the frame making the work of cleaning smoother for you. After cleaning, park the dozer either in the snow or on aged tires.

 

If you do not shovel the mud, it will freeze on the track creating a big problem for the dozer to start up and move. The finest way to unfreeze a frozen dozer is to control the heat and fire and to make use of propane light.

  • Maintenance of Electrical system: – Proper maintenance ofelectrical system which consists of batteries and wires should not be overlooked. Their periodical checkup is necessary to avoid short circuit. Replace the damage or old battery instantly once you detect them. Your wire should be good enough with an efficient fuse system.

 

Use 12 V batteries connected in series to ensure the working of your 12V radio for two-way business. You can also make use of an inline fuse system close to your battery. It will help the radio to work more effectively without causing any harm to the other parts of the machine.

To put it practically, routine maintenance of equipment will help you to save your money. So, it’s better to do minor fixing to upturn the average life of the dozer.

Are you about to purchase new heavy equipment? Check the specifications first

Among the several other businesses, construction companies are gaining the popularity day by day. It happens because of its amazing advantages that help others to make huge profit from it. Construction business is the best platform to earn huge money and create a strong position in the market. Now, if you are a new comer in this field and want to run your business successfully, then it is important to purchase required heavy equipment for your site. There are many types of heavy machinery that can be useful in construction site such as bulldozer, excavator, articulated truck and many more items. However, there are some qualities that you need to know properly before purchasing the equipment.  The most important thing that needs your concern is the specification of the equipment. Every machine comes with different specifications that you need to learn in order to match up with your requirement.

Now you must be wondering that why the specifications are so important. To know the details of its importance follow the information below-

 

  • Features of the different machine: The most important thing of a machine is its features. Without good features a machine cannot provide good job. You must know that every single machine has different features. Features play the identity role of a machine. Whether you are going to buy an excavator or a bulldozer you will have to check its different parts and features. In fact, there are different models of excavator. You will get this item is small, medium and large size. You will get it in different price as well. To know more about equipment, you need to follow its specification. It will definitely give you a clear idea about the machine.
  • Required machine: It is very important to know the specification to buy exactly what you want. If you start to gather knowledge about its different parts and specifications then you will understand its value. Thereby, the fact is that specifications help you to get your required heavy equipment.
  • Good or bad: Well, through the specification of equipment you will be able to know whether the machine is useful for your or not. If you want to use it in your work place to carry heavy loads then you have to buy such machine that can perform it smoothly. By getting the clear idea about the specifications, you will be sure whether you can work with it or not.

If you are finding the best platform to collect the proper information about different specifications of different equipment then you have to search on internet. It is the best platform that can provide you correct news regarding such equipment. There are many sites available that deal with heavy equipment. You should follow the sites. Moreover you can talk to some people who have already used such machine. They can definitely help you o

Simple steps to operate a bulldozer

Bulldozers are huge and very powerful construction equipment. It has a strong hold to the ground because of its tracks. These tracks enable the machine to keep moving on a very course terrain. Generally, it never gets stuck in muddy or sandy ground. This is because the large track of the bulldozer distributes the weight of the machine uniformly over a wide area. Blade and ripper are the primary tools of a bulldozer. It is mostly used for levelling the ground surfaces. Though it is a heavy machine, but you can drive it quite easily. If you want to learn the steps for operating a bulldozer, then just follow the simple steps which are mentioned below.

Tips to drive a bulldozer

  • Buy a bulldozer: – First of all, you have to buy a bulldozer. It is because, you cannot afford to practice on a bulldozer which is possessed by other people. If some damage happens then you have to pay to the person for its repairing. So, it’s better to get your own bulldozer. You can either buy a new bulldozer or go for a used one. It will help you to get a bulldozer and that too at an affordable cost. You should practice to operate a bulldozer in large open area to avoid any kind of accidents.
  • Board on your bulldozer: – Now, board on your bulldozer and have a sit on the seat of the driver. Just chill. Try to overcome your nervousness while you are focussing on driving. Do not start until you are relaxed.
  • Kick on the machine: – In order to start the engine of the bulldozer, turn the key which is there in the ignition. Place your foot on the brake, so that you can easily stop it in times of emergency.
  • Steer your bulldozer: – Grab the joystick and slowly thrust it to the direction you want to go. It will help you to have a control on the bulldozer’s movement.
  • Push the paddle of decelerator: – To reduce the speed of the bulldozer, you should push the paddle of the decelerator with your foot. In such an equipment, the paddle of the decelerator is always situated just beside the brake.
  • Manage the blade: – After pushing the paddle of the decelerator, now you have to get a control over the bulldozer’s blade. You can easily gain a control over that using the joystick. This joystick is placed at your right hand side. It is a heavy metal plate which shoves the mud and the sand to make the surface plain.
  • Level the surface of the ground: – The final step is to levelling the ground surface. For this, you have to slightly lower the blades so as to leave a very small gap between the ground and the blade. Now, control the pedal and the joystick to move the bulldozer to the forward slowly. The blade goes on shaving the ground as you continue to drive it to the forward direction.

 

You can also seek the help of an expert to sharpen your skill in this sphere. But don’t forget to try the steps in a plain land and not on a slope until you become expert in it.

How To Construct Pipelines using Heavy Equipment?

Almost all the projects of pipeline construction occurs mainly in rural areas and this construction work can be carried out in all climatic conditions. The receiving of effective and timely supply of logistics can appear as a major challenge because of the inferior infrastructure which is a very common case while carrying out the operations of pipeline construction. Moreover, heavy equipment plays a vital role in constructing the pipelines. You should have a proper knowledge of the heavy equipment before you take on the job of pipeline project.

Heavy Equipment for Pipeline Construction

  • Dozers: – Dozer is used to clear the land where the pipeline is going to be installed. The land is levelled using the dozers to enable the workers to construct the pipeline there. Here, they are mainly used for cutting and grading. Dozers which are generally used in pipeline jobs differ in sizes according to the job requirement.
  • Shovels: – Though shovel is not a heavy equipment, still it plays an important part in the construction of pipeline. They are used to dig, lift and shift huge objects required for pipeline jobs. They are one type of excavator and power shovels which are big in size is used during the work.
  • Backhoe:- The employees use backhoe to excavate the trench of pipeline. The land which has been excavated while carrying out the work of ditching is temporarily piled on the inactive side of the trench that means where no work is being done. The depth of the excavated ditch depends on the diameter and width of the pipe to be installed.
  • Pipe bending machine: – Each joints of the pipe to be installed are suspended along the right side which is adjacent to the unearthed ditch, and arranged in such a manner that it become gettable to the personnel employed in the pipeline job. The pipe-bending machine bends every joints of the pipe to the prescribed angle at places where there is a notable underground curvature and where it is needed to change the path of the pipeline. The pipe-bending machine includes Motor Grader, Motor Crane, Air Compressor, Pumps, Skid Truck and many more.
  • Side Boom Tractors:- The collections of the pipes are lowered into the trenches through the use of side boom tractors. The trench then is filled again with the help of bladed equipment like shovel, tractor and others.
  • Dump Truck: – Dump Truck is heavy equipment used in pipeline installation. It is used to carry loose materials like dirt, gravel and sand which can be purposeful for the pipeline job. It comes in a lot of types and the contractor should choose the right one to complete the work perfectly within the said time limit.

 

After the backfilling ad testing work of the pipeline completed, the disrupted ground is restored once again to its initial look. Construction of pipeline is not an easy job and it calls for some maintenance too after the work has been done. The inspectors of the project have been assigned with the job of monitoring and supervising the constructional work which they have to perform with great care.

Use the Caterpillar D11 Dozer to Work Smoothly

The sector of big infrastructure makes use of the machines which are specialised in carrying out the works of massive earthmoving in connection with big construction works like dams, building construction, harbours and roadways. When the matter of moving objecting bodies come, no other equipment can work better as compared to Caterpillar D11 Dozer. It is gaining a prominent place in the construction industry because of some of its outstanding features which are later discussed n this article. Just check out.

Features of Caterpillar D11 Dozer

Caterpillar D11 Dozer is a giant bulldozer which is manufactured by the company Caterpillar Inc. It was first manufactured in East Peoria, Illinois. The equipment’s main applications are in the mining industry. Though it looks very similar to a bulldozer, but it is capable to do more work smoothly a compared to a heavy-sized bulldozer. It is also used to push the huge scrapers and to rip the overburdened rocks. By ripping the oversized rocks, it breaks the rocks into minute particles making it easy to shift from one place to the other. The Caterpillar D11 Dozer has replaced the Dozer D10 in the month of February in 1986. The height and length of the Dozer D11 are 14.9 ft and 35.8 ft respectively. The total power uses by the equipment is 936hp. The maximum weight it can shift is 230,581lb. The Dozer consists of a huge track and a special blade along with a curvature which helps the machine to push the objects to at least 57 yards away. The Dozer is designed in such a manner that it can handle extra weights with ease. According to the statement made by the Company Caterpillar, more than 3000 Dozers have been manufactured in Illinois by 2000.

Both the models of the Caterpillar Dozer- D11T and D11 T CD are installed with a CAT C32 Engine which makes full use of the technology ACERT. As all the models of the Dozer designed by Caterpillar are big, delivery sometimes comes as an obstacle when it is ordered from a distant country.  That’s why, they are shifted through railroad flatcars which consists of a blade where the ripper frames and the push arms are removed. Most of its parts are dismantled during transportation by making use of innumerable semi-trailer trucks.

The major company which comes up as a rival to the Caterpillar D11 Dozer is Komatsu D475. Another Dozer named Acco Super Bulldozer manufactured by ACCO, an Italian Company, also is giving a tough competition to the Caterpillar Dozer. Though the other models lack in many respects when they are compared with the D11 Dozer, yet D11 dozer has to be improved more to stay active in the competition?

If you are planning to buy dozer which has enough strength to carry out innumerable works with ease and is not sensitive to rough handling, you should not think twice while going to purchase D11 Dozer. In fact, it is the best option which will help you to do all your tasks smoothly and complete it within the prescribed time limit.

Using Specific Machine For Specific Work Can Yield Good Results

Have you ever wondered why there are so many heavy equipment in use in a construction site when the same machine has the potential to do multiple tasks? We see a backhoe loader, dozers, excavators, scrapers etc. and often think why they invest so much of money on heavy equipment when they can easily make use of one of their equipment into multiple purposes and get the work done. Well, the construction companies use so many machines for a specific cause adjoined to with and we would be highlighting on that cause.

Heavy equipment has its own intrinsic capability, though it is also potent enough to perform on other areas, but it makes more sense to use the equipment for the very purpose it was produced. For instance, one primarily uses an excavator to dig earth and remove the dirt and carry them from one place to the other. Now the same excavator can also be used to demolish a structure for which it is very much potent. However, you still use a bulldozer to get that part of the job done. This fact implies that though different heavy equipment has the capacity to do several tasks some which do not fall in their job area, it is better to restrict them from doing such tasks. The reason could be many. One of the important reasons is that it may not be much productive and may not yield desired results.

It becomes a big challenge for newbie to understand the role of heavy equipment in his business. Few are also of the opinion that they can do all the required work with the help of one machine and may not need any other equipment for other tasks.

What is rather advisable to guys new in this industry is that they first make their ground concrete by doing a thorough study on heavy equipment and understand the purpose of heavy equipment in their business. They have to get this pretty clear in their minds that single equipment can’t be used for all kinds of work. They have to invest more on equipment if they want to see their machines work for longer duration and also want to get the desired job done quickly.

They can research on the equipment using internet or joining forums where they can put up their questions and can expect to get expert comments. Those comments would turn out to be very helpful for a person who is new to this sector. Alternatively, if one can get some amount of experience by working in this industry for a span for few years, it would help him a long way. He would know more about machines and also which machine can get the work done faster without compromising the quality of its parts.

Employ D6 Cable Dozer as a Weighty Farming Tractor

D6 bulldozer is a kind of pathway tractor that is manufactured by Caterpillar Inc Company. This dozer is usually available in the weight of 18 tons. It is furthermore utilised in military base camps in the model name of SNL G152 middling canker. This dozer falls under the class of heavy equipment. The readers of this article will get to know the applications of D6 cable bulldozers in agricultural and other sorts of fields. The farmers started using this mechanism in the year 1941. The blades and rear tools are attached to these D6 cable dozers.

Antiquity of D6 Cable Bulldozer

The first D6 cable dozer was operated in the year 1935 in the name of RD6. This conventional dozer was equipped with an engine of 3-cylinders. The first D6 model was invented by Caterpillar with the version of 4R and 5R chains. Some of the features of traditional D6 Bulldozers are as follows:

  • D6 8U and 9U bulldozers were available with 6-cylinders engines.
  • D6C was launched in the year 1963.
  • D6D with 140 hp motor was launched in 1977.
  • In the year 1986, D6H was invented with the drive sprocket system.
  • D6M is also a sort of cable bulldozer that is accessible with LPG adaptation.

Engine Feature of D6 Cable Dozer

  • The modern Caterpillar D6 cable dozer applied a 6-cylinders diesel motor with the rate of 1800 rpm.
  • The measurement of the engine disarticulation is 638 cubic inches.
  • The capacity of the fuel tank of this transformer is 65 gallons.
  • In this engine, the customers get the facility of conduction up to three expedited cogs and one overturn gear.
  • The height of the Caterpillar D6 cable bulldozer is 105 inches.
  • The length and breadth of this dozer are 184 and 96 inches respectively.
  • The weight of this heavy equipment is 33,000 lbs.
  • The frontage and back tires pathways are available in the size of 60-74 inches.

Indispensable Protection Guidelines for Bulldozer Operators

  • Only proficient, qualified and experienced employee should be permitted to control bulldozers.
  • The drivers should always wear the seat belts whenever they start the machine.
  • The machinist should start the engine of the dozer only when the path is clear.
  • The bulldozer drivers should know all the techniques of lock out, tag out and block out at the time of refurbishment of the machine.
  • The method of traffic control helps the dozer operators to run the equipment in public place.
  • The operators should use flaggers to manage the mechanism in a crowded area.
  • It is sensible for the workers to keep the bulldozers away from the transparency power rows.

D6 cable bulldozers are obtainable in the souk with various sorts of dozer blades. The short straight blades with no tangential bend can be applied for grading the soil in fine particles. The U-blades are big, arched and have the feature of great elevated wings that help to collect more amount of earthy material at a time.

Learn the six basic applications of bulldozers

Bulldozer is a heavy constructional equipment that is mainly used to build roads and glade the land. In the olden days, most of the bulldozers were in the form of tractors. The farmers used it to plow their field. But now, it has become more useful with many modifications such as rear ripper claw. At present, it has become an unavoidable part of the construction industry. Apart from that, it is also used extensively in mines and various projects of engineering.

Applications of a bulldozer

You can use a bulldozer for variety of purposes. Some of them are given below:

    • Building of the roads: – The first step to build a road is to remove the topsoil. It is very important because the topsoil contains large quantities of moisture and organic bits and pieces. This removal of the topsoil helps to increase the stability of the road. You can easily push aside the topsoil with the help of a bulldozer. It leaves an opening for the construction of the road. This opening can be filled with rock-strewn. Many people use the bulldozer to smooth the cram of the opening.
    • Demolishing old unnecessary structures: – Another important use of bulldozers is the act of destroying and demolishing old and unnecessary properties. You can knock down a building quickly using a large bulldozer. Bulldozers that are used for demolishing purposes comprise of a powerful cab to protect the user from any kind of injury. After knocking down a derelict property, you can use the bulldozer to mound the debris and polish up the whole area.
    • To move huge quantities of earth: – The bulldozers are extensively used for pushing away large quantities of soil and earth. It can set aside the piles of organic matter by making use of the blade. You don’t have to use any backhoe to uplift everything and keep it aside for later disposal. Sometimes it is attached with various kind of digging machines or backhoe. This backhoe is used to uplift any material from the excavation site which is later pushed away by the bulldozer to some distant places.
    • For construction purposes:- Bulldozers have many different purposes to serve in the process of construction. Most of the big projects of construction need widespread preliminary work of the site which the workers can smoothly do with the help of the bulldozers. It can easily strip off the vegetation for digging the pit.
    • For clearing enemy’s base: – The armies use bulldozers to clear the enemies’ bases and other infrastructures. They use armoured bulldozers which protect them from the attacks of enemies.
  • For deforestation:- The sharp blades of the bulldozers are used for cutting down large trees.

 

As it goes on tracks, it has great grip against the land. Bulldozers are used by the workers to carry out the work without any difficulty. If you too need a bulldozer for any kind of above mentioned work, then go and get it today.

 

 

Tips to buy a used bulldozer

Any construction industry depends heavily on a bulldozer. If you too want to start a business of construction, then at first you should buy a bulldozer. But, if you don’t want to spend much money in buying it, then you should go for a used bulldozer. It is very cheap and you can easily get it from the manufacturing companies.

Buying a used bulldozer is not very tough. You only have to keep the following points in your mind while buying it.

Tips for buying a used bulldozer

  • Determine your budget: – The most important thing which we generally consider is the budget. To determine your budget, you should evaluate your equipment requirement. Your budget will be directly proportional to the size of the bulldozer you are going to purchase. If you need a big bulldozer which can carry out heavy tasks, then you should have a big budget. If your budget ranges from $2000 to $45000, then you can easily opt for a large bulldozer.
  • Transporting the bulldozer: – The next step is to find a path for moving the bulldozer to your business or construction site. For this, you should get a truck which has the equipment to drag a bulldozer. If you are unable to find such a truck, you should immediately contact a local construction company and rent a truck for the above said purpose.
  • Search for “Buy it now” sites: – Before purchasing a used bulldozer, you should go for a little search on a sell-off site like eBay. To keep away yourself from all kinds of bidding war, confine the searches to take in particularly those auctions under which it is written “Buy it now”.
  • Should match your need: – Another important thing before buying the bulldozer is that you should focus on the type of job you want to accomplish using it. It should match your need perfectly so that you can carry out the work without any difficulty and that too at a short time.
  • Check the condition of the bulldozer: – Many a times the sellers sell use defective equipment on which we have to spend money for repairing. So, you should be very careful while buying the product and don’t forget to check its condition before paying a single penny to the seller. This will save your money.
  • Call local construction companies:– It’s a great idea to call around the construction companies of your area and ask them if they have operated the machine which they are offering to sell. If you do not want to do online transaction, then you should opt for some local sources of bulldozers. It will prevent you from the transportation costs.

 

After going through the following steps, you can buy a used bulldozer without any worries. But, try to get it from a reliable company. The companies generally offer much-improved bulldozers and its total cost is also very reasonable. So, why spend extra money on buying a new bulldozer? Start your construction business today by purchasing a used one.

Steps to bulldoze a farm using a bulldozer

Do you want to clear a farm? Don’t you know how to use a bulldozer for it? No worries. You only have to follow some simple tips to use a bulldozer for bulldozing a farm.

It is a well-known fact that farmland clearing is a very difficult and lengthy task. You can make this job easy and quick only when you have the right type of bulldozer with you. Due to the presence of curved blade in its front, it is known as bulldozer. If you don’t have the suitable equipment then you have to spend a lot of time in doing this laborious work. You can directly go and buy a bulldozer, or you can rent it from some genuine renting company. Using the bulldozer, you can easily steer away any kind of debris from the farm. Even an average-sized bulldozer can easily clean acreages of brush and rock-mottled farms in one day. But, sometimes it takes more than one day to do this. You can also hire contractors, but you should try to complete the job yourself. This will keep away excess expenses.

Steps to bulldoze a farm

  • Cut the trees: – Get rid of the trees by cutting them with the blade of the bulldozer. Big trees may need some more shoves for completely knocking them down.
  • Tie up the remaining trees with chains:– The stumps of remaining tree and huge boulders should be tied with a chain. Attach the other end of the chain to the backside of the bulldozer. Now, to uproot the big trees, start driving the bulldozer in the forward direction. If there is any unnecessary small structures of farm, then pull it down using the chain.
  • Force the debris into heap: – Now, it’s time to clean the debris. For this, you have to use the blade. Force the debris and other rocks into heap so that you can pick it up later for disposal. Segregate the heaps into controllable portion so that you can avoid doing any extra work during the process of disposal.
  • Level the dirt: – This is the most important step in bulldozing a farmland. To make the land suitable for farming, you have to blend the dirt with the help of the bulldozer blades. Try to maintain very minimum distance between the blade and the ground surface.
  • Fix a rake: – Rake in bulldozers lends a hand to clear the remaining debris. The rake should be fixed to the bottom end of the blade of the bulldozer.

 

Scientists have designed the latest bulldozers which are good looking and can perform any kind of heavy task with ease. The modern bulldozers are provided with electronic goods. With the invention of the bulldozers, bulldozing farmland has become a child’s play. But, you should remain very careful while using it. Any negligence regarding it can cause havoc adversities. So, before using it, you should take the advice of the professionals.