Category Archives: heavy equipment

Prevent and Minimize Heavy Equipment Undercarriage Wear

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

We all know that any minute issue in heavy equipment if not taken care at the right time may give birth to serious problems in the nearby future and which is why it is very critical to keep your machine well maintained. By saying your machine, it is just not limited to the equipment but also the undercarriage that forms an important part of the machine. The equipment is not operated in the right manner may give exert more unwanted pressure to the tracks and thus it may lead to issues down there and that may even result in the machine going idle for days till the time the undercarriage doesn’t gets fixed.

The major reason that can lead to an early deterioration of the undercarriage is having a tight track. A tight track can give rise to many problems in the undercarriage and therefore it is recommended to check the tracks well during the time it’s installed on the machine. Too tight tracks can lead to eating away of sprockets, bushings, carried rollers etc. thus decreasing the overall life of the tracks and will also shoot up the operating cost of the machine. The procedure to adjust tracks differs from machine to machine. It basically depends on the kind of sprockets being used in the machine (if it has an elevated sprocket or a conventional one). Though, it is advisable that one should always adjust the tracks in a job site rather than doing it in a shop.

Lower down the speed of the equipment when it is not productive. You definitely would not want it to wear for non-operational reasons. It has been seen in many construction sites that the operator is always in a hurry and runs the machine at high speed when it is not productive. Well, there is simply no reason to put it in a high speed when you don’t want it to perform. That is one of the reasons why the undercarriage wears in less time than compared to equipment that are not always in a state of hurry. How is speed related to deteriorating the quality of the machine? It directly affects the bushings, sprockets, idlers and all the other important component of the undercarriage. It affects the most to the bushings and sprockets when you reverse the machine at a high speed. Hence, when it’s not at work or when it is needed, it should be driven at a high speed.

Turning the machine constantly in a particular direction wears the undercarriage in that part. It particularly affects the rail slides, idle flanges and rollers. In case, where you just can’t avoid turning the machine in one particular direction, you should better examine the tracks at the end of the day and check if you can continue with it the following day. If so ever, you see that it needs some adjustments to be done, get that done before you further wear it down.

In case of slipping tracks, you should ensure that you reduce the load because if not done, then it may affect the grousers.

Follow best tips on Hauling Heavy Equipment

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

When you are going to start your own business on heavy equipment then it is very important to take care of your equipment. As the equipment is quite expensive therefore it is very important to maintain them properly. Without a proper maintenance you cannot work with them. It is very obvious that when you are spending huge money on such equipment, then it is highly essential to provide good care and maintenance. If you need to move the equipment from one place to another then also you should take help of some proper services.

Well, hauling is one of the best services for transporting big, cumbersome equipment like excavators, tractors, motor graders and cranes. Generally such equipment is used in the construction site, shipping and warehouse management. It actually needs professional transport. Hauling service can definitely help to move such machines from one place to other locations or job sites. It is very important apply special skill to take care of such heavy equipment during transport if you want to keep them safe and secure on the road.

Here are few tips that can help you to maintain the hauling heavy equipment. Follow them:

 

You can definitely take help from open flatbed trailers that can really be very useful for heavy equipment hauling. It can drive the equipment carefully and also help to position it properly. You need to distribute the weight carefully so that it can balance the trailer and stop any unwanted problems.

In order to protect it from any wrong movement you always strap it down. Moreover, to rescue it from any bad weather you can use protective sheeting. It will cover the equipment and keep it safe and secure.

In fact, you can definitely use closed trailers for hauling your heavy equipment. However, if your equipment is really very heavy, then it becomes difficult to try hauling with closed trailers. Actually this type of hauling can give its best result in the rough climates or regions.

Well, irrespective of open or closed environment one has to design the heavy equipment properly for hauling. Therefore, you should always take care of its height, weight and also the truck properly.

Drivers who are involved with this work and handle this field should be highly qualifies and well trained. You should definitely check it out before hiring someone for this job. For hauling your machines properly you need to use perfect trailers that can maintain it. Though it takes some time to adjust with the work environment still you should give your best and manage to make it perfect.

If you need to turn, move or apply special precaution on your machine to prevent any issues then you have to be very careful.These are the few steps that you need to perform for perfect hauling on your heavy equipment. It is very important to remember these tips and try them on your machine.

Related articles across the web

    Learn More about Your Heavy Equipment- Getting To Know About the Sources

    Podcast: Play in new window | Download | Embed

    Subscribe: Apple Podcasts | RSS

    Those involved in the construction arena are going to appreciate the important position the knowledge of heavy equipment has. It is a widely accepted fact that the heavy equipment is a key ingredient of running a successful construction business. In order to keep the success quotient of your construction organisation at a consistent level, it is important that you pay attention to the latest developments and trends of the construction industry, especially the heavy equipment.

    Sources of Information- Getting To Know More about Heavy Equipment

    Continuing with the study of latest developments with respect to heavy equipment in the construction arena is important. But the question that one might face on this score is where exactly does one look for information?

    • Blogs– Construction blogs are one of the best ways of staying updated the latest developments and trends of the construction industry. All you need to do is follow a blog that provides verified and analysed data to its readers and you can get to know all that is there about heavy equipment.
    • Social Networking Media– The tech savvy global population today stays connected via the social networking sites. These social networking sites can prove to be a veritable trove of information. Pages dedicated to the construction industry provide its followers with updates of all the recent developments with respect to heavy equipment that are likely to affect the construction arena.
    • Online Construction Journals– You could also consider following reliable online construction journals. These journals provide detailed information on not only the developments that have taken place, but also informs professionals about the researches going on with respect to heavy equipment and the effect the success of these might have on the industry.
    • Construction Forums– The World Wide Web is filled with all kinds of forums dedicated to distinct fields. You could look for those forums dedicated to the construction industry to gather knowledge about the recent developments with respect to heavy equipment. These forums also come equipped with interactive features, allowing users to interact with other professional of the same field. These forums will let you share and nourish ideas which can then be applied for development of your business.
    • Seminars and Conferences– You could also consider attending seminars and conferences. Not only will these let you know about the latest heavy equipment and technology on the block, these conferences often prove to be useful in developing business relationships and assessing the strengths and weaknesses of your competitors.
    • Construction Unions– Being a part of construction trade organisations always helps as you can avail information on the latest newsletters and publications etc related to heavy equipments quite easily.

    There are a number of sources that a construction professional could consider when they require information on the heavy equipment. All they need to do is opt for the source that is the best for them and keep a tab on that source in order to stay updated.

    Related articles across the web

    Oils and gas industry should use equipment tracking system

    Podcast: Play in new window | Download | Embed

    Subscribe: Apple Podcasts | RSS

     

    It is not an easy process to drill oil because it needs almost 10 different companies that provide different services. Actually, if you want to drill oil properly then you have to gather several crews and equipment. However it is difficult to know how to work with these devices. In order to maintain real time visibility into the remote operations oil and gas companies are taking help from equipment tracking software. Such technologies have many advantages as it give a chance to the businesses to enhance the efficiency and productivity of the equipment. There are five different reasons to utilize equipment tracking services. Check it out:

    It helps you to find out equipment and related data easily:

    If you want to start your construction business or involved with Oil and Gas industry, then it is really important to purchase equipment that can help you to run your business.  Sometimes people forget to take care of such equipment and it can be lost at the jobsite. You may forget that where you put the equipment so these can really make you nervous. So, if you start to search the missing machines manually then it can take your huge time and money. Workers are always busy to work on the site, move the dirt and give priority to their job. So, it is always good to buy an equipment tracking system. It will help you to find out your equipment properly and maintain your business without any disturbances. You can even use any device that has internet connection to access every single data related to your equipment from your screen.

    Improve customer service

    When you are running your business then you always have to think of your customers and clients. It is really important to keep your customer happy to maintain your business. In the industry of oil and gas, you have to deal with hundreds of machineries and trucks. Sometimes, due to all such transactions delays can happen. Due to many other reasons such as traffic congestion, problems in the worksite customers may have to wait a long time to get their order. In such cases, if you can take help from an equipment transaction then it will allow you to take care of all your machines. You can keep the updated information on your machine at your hand. So, your customers will get excellent service from you. It is the best thing that the construction companies should take care of and always apply this equipment track system to get many advantages.

    Improve the relationship between clients and workers:It helps you to improve the relationship between client and workers. To run oil and gas industry, it is really essential to manage good relationship with the customers. So, the equipment tracking system is highly important for this business as it helps to maintain the business properly. There are many other advantages that you can get from equipment tracking system.

    Related articles across the web

      Rent a Bulldozer for Construction Purpose

      Podcast: Play in new window | Download | Embed

      Subscribe: Apple Podcasts | RSS

      A bulldozer is a crawler that is available in the market in the form of large heavy equipment. It is attached with a metal plate that is used to push large quantity of soil, sand and rubble at the time of construction. This bulldozer is also equipped with ripper to loose the thickly squashed material. The ripper attached to the bulldozer appeared in the shape of a claw. The bulldozer can be found in various places like on the construction sites, mine and quarry areas, military base camps, in the heavy industries factories and in the farm. Nowadays there are many equipment rental companies that are providing expensive heavy equipment in rent to the required companies. Many a times the construction companies rent the heavy equipment bulldozers for their edifice purposes. The mining industry rent the bulldozers for drawing out applications.

      Importance of renting a bulldozer

      • It is essential for any construction company to rent the bulldozer because it is utilised in removing a large amount of earth and soil at a time. It has the capability of pushing a large amount of weight by using the blades attached to it. It helps the workers in reducing their stress.
      • Bulldozers are often considered as the principal device for building roads. When the process of building road is going on, the top soil on the road is removed by the bulldozer. It also helps to make the structure of the fills smooth that is used in building roads.
      • For the purpose of demolition bulldozer is often used. It is very hard for the labourer to break the old house, in those cases bulldozers shatter the house at once.
      • This heavy equipment is also used in farming purposes.

      Types of blades used in Bulldozers

      There are different sorts of blades that are used with bulldozers. The attachment of the blade with the bulldozer depends on the quality of the soil. That is its depend on the moisture content, terrain, ambient temperatures of the earth. The diverse ranges of blades are as follows:

      • The full form of s blades is straight blades. The geometrical shape of this blade is straight that is connected to the tractor by bulldozer. These straight blades are mainly utilised in the material that are medium or highly condensed. These blades are mainly used in various activities like stumping, trenching, backfilling, shaping and stripping.
      • Another genus of blade is SU blade. The full form of SU is semi U blade. This blade is generally applied to take out the earth from the middle ground. This blade is also attached with the tractor. The distinct feature of this blade is the forward curving side wings that helps to obstruct the spillage of material. This blade is used for soft and medium hard soils.
      • U blade is appeared in the shape of “U” alphabet. Because of the unique shape of the blade, it helps to take out the material in scoop.
      • Angle blade is another sort of blade that is used for various activities such as stumping, nodding of soft to medium quality of soils, trail pioneering etc.

       

       

      Related articles across the web

      Choosing The Right Piece Of Heavy Equipment To Do The Job

      Podcast: Play in new window | Download | Embed

      Subscribe: Apple Podcasts | RSS

      Though construction industry is one of the industry that has the capability to generate good returns within a couple of years from the inception of the business and in order to ensure a successful business, one needs to know the in and out of the business and the equipments attached to it. It would be rather unwise of an individual to directly jump off into it without knowing the intricacies of the trade and then end up burning his fingers. Construction business is not rocket science and one doesn’t have to slog his entire day learning the tricks of the business. He only needs to make sure that he is learning everything that he gets to know on a daily basis. Apart from the knowledge in successfully running the business, one thing which also plays a crucial role in shaping up his business and responsible for its continuous growth is kind of knowledge he has on heavy equipment.

      It is important to understand that not all heavy equipment can be used to perform every kind of activity. Though some machines are made to multitask, however this is not a thumb rule and it is not mandatory for every machine. Some equipment is good doing the core thing for which they are produced and are better not used for anything else. Therefore it becomes very critical to understand the role of the equipment and use them for purposes they are exclusively made for.

      How can one choose the right piece of heavy equipment?

      This one stands to be a very valid question as one may confuse himself in mid of several options available in the market. In such a situation, it becomes prudent for the individual to either do an extensive course on heavy equipment where he will be given a basic understanding on heavy equipments and can also know the specific role of the machine before buying it.

      This option may not sound prolific to a person who has a set business and can afford a technician who will guide him on the equipment. For such businessmen, it is recommended that they hire a professional who will do a thorough study of his business and the type of projects that are progressing under his banner. Only after understanding his projects, he may recommend the heavy equipment he needs to buy. The other benefit in hiring such a professional is that they can guide you from which heavy equipment manufacturing company you should be buying your equipments. It has been witnessed that the most difficult decision to make is to select the best brand. The suggestion of a professional would be quite handy for you to take a decision.

      One can also make use of internet to know what heavy equipment he should be using for his project. However, this may not be as effective as hiring someone to help you take a decision. In a nutshell, things will be in better control if you’ve the right equipment to get the job done.

      Related articles across the web

      Benefits of using camera in the heavy construction equipment

      Heavy construction equipment are becoming more advanced with every passing day. The construction equipment manufacturing companies are introducing new technological advancements to the equipments so that the users can get benefitted from the accessory. One of the latest additions is the incorporation of camera to the construction equipments. In most of the cases, the wheeled loaders are being equipped with this accessory. One of the companies that have excelled in this service is the Sibelco heavy construction equipment manufacturing company, which is a Belgium based company. They basically produce the construction equipment to refine and extract various kinds of minerals from sands. The camera system that has been introduced to the wheeled loaders is the RadarEye camera and monitoring system. This camera system is a very helpful technology that helps the operator of the vehicle to have a real-time vision. Not only this, but also, to get detailed information about the site where the work is going on, this RadarEye camera system helps a lot. Whereas, in most cases, the detection of the materials and objects on the field becomes difficult, this RadarEye helps the operator to have a detailed view of the field.

      The camera on the heavy construction equipment is very beneficial for the heavy construction equipment operators:

      • As in the regular vehicles, it is very important for the driver to have a rear view and the view of the surrounding, even in the heavy construction equipment, the operator needs to have a rear view and also of the surrounding. As the cameras installed in the heavy construction equipment are designed with the property of rotating more than 120 degree on an average, it offers the operator the opportunity to have a wide angle view of the back of the vehicle.
      • The LCD screen that is placed within the cab of the heavy construction equipment is of a minimum of 7 inch width, and therefore, it is very helpful for the operator to have a detailed look outside. The LCD screen is also colorful and therefore, the view becomes clearer and comfortable for the eyes.
      • It is very likely that the accessories in heavy construction equipment become damaged very easily. Whereas, the parts of the equipment gets damaged so easily, something as delicate as a camera would also be damaged due to the extreme load and pressure that the heavy construction equipment faces. However, to tackle this problem, these cameras have been designed with weather proof technology that can perform its task in extreme conditions of heat, water and snow.
      • The camera and the monitoring screen do not need any external control boxes and comes with warranty, so the operators do not need to bother about the after sales services.

      The Rosco Incorporated Company introduces such cameras for loaders, excavators, bulldozers and tractors, cranes, rollers and all other kinds of vehicles, with an aluminium casing.

      Renting an Excavator? Make Sure You Are Aware Of the Associated Factors

      Podcast: Play in new window | Download | Embed

      Subscribe: Apple Podcasts | RSS

      The construction area is all about the optimal utilization of heavy equipment. Making the best use of the available heavy equipment is the best way to ensure that things are running quite smoothly. However, it may so happen that specific heavy equipment is demanded by a specific construction project. What will you do then? Well, buying brand new equipment does not really make sense. So, the best option that you have before you is to rent equipment and finish off your work.

      The Excavator and the Area of Construction

      The excavator is one of the many indispensible equipment that is seen put to use in the construction forum. Comprising of a stick, bucket, boom and cab on a rotating platform, the excavator has gone on to become one of the most important equipment on the block. One of the most versatile heavy equipment on the block, the excavator may be used for a variety of purposes, such as, in digging trenches and holes, construction work involving demolition, mining, river dredging and the like. Also termed as “trackhoes”, excavators operated by means of a cable largely depend on the steel ropes for accomplishing the purpose of work, whereas the hydraulic excavator, which is more commonplace, operates by means of the hydraulic fluids, hydraulic motors and hydraulic cylinders.

      Renting an Excavator- Factors That You Should Know About

      Are you going to rent an excavator? Well, that is all very well, but there are certain aspects of the entire deal that you need to be aware of.

      • The depth and size of the dig along with the ground cohesion are some of the major aspects you would need to consider before you opt for an excavator rental.
      • Assessing your requirement and then furnishing the rental company with the details of the same is another way of ensuring that you come up with the best equipment for your purpose.
      • A number of rental companies on the block might also offer you what is known as operated excavator, which means that they are going to provide you with a licensed operator for operating the excavator.
      • Since machines have to deal with so much, breakdowns are a common occurrence in the construction arena. In such a situation, the excavator rental company will be held responsible for it, especially so when they are providing certified operators.
      • Price is another factor that you need to consider. Excavator rental companies are likely to provide you with equipment on rent on a weekly, monthly or hourly basis. Hence, it would be best if you take into account the period of your requirement and then seal the deal.
      • You should also take a thorough look into the downtime policy of the rental company. There might be a period when you will not be able to put the rented excavator to work due to unfavorable weather conditions and paying for the equipment in such a situation is not really a lucrative deal.

      While renting an excavator might seem to be quite a lucrative deal on the block, there are certain aspects of the entire renting deal that you should look into before anything else.

      Related articles across the web

        Want to start a construction business? Follow the steps and take experts’ advice

        Podcast: Play in new window | Download | Embed

        Subscribe: Apple Podcasts | RSS

        In the recent time, construction business has emerged as the most profitable business due to many reasons. Thereby everyone wants to try their luck into this business. It is not so difficult to run a construction site. But you have to maintain some rules and follow it thoroughly. While you are interested in construction business, thereby, it is advisable to take experts suggestion. Like other businesses, construction business also has many risks and problems. To avoid such issues and overcome the risks you have to talk to some experts. There are many experienced companies who run their business successfully; you can follow their routes to achieve success in this field.

        Before starting a construction business you have to understand its groundwork. It is a job of huge responsibility, thereby, you have to plan your work and arrange proper steps to complete your project. It is always safe to work with some experienced personality at first and then start your own business.

        Check out the following steps before starting your construction business

        • At first you have to make a business plan that includes your goals. To maintain your work you have to decide how you will complete your work. All the important things regarding this plan such as different stages of this business, timeframe and financial assistance, have to maintain from the beginning. If you cannot manage to gather proper fund for this business then you can contact some financial institute and they will certainly help you out. When you contact an expert person he/she will discuss all these things with you and help you thoroughly.
        • Experts suggest making a perfect space for your construction business. You need to book a property that can provide office space. You will need a large space for controlling your works. In fact, you have to purchase a number of heavy equipment (or rent from company like B&R Equipment) and tools thereby you should make a place to accommodate such big machines. At first you can work from your home. But as your business will grow you have to choose an official site for running your business.
        • It is always safe to maintain all the legal steps for starting a business. Thereby, you should have your business licenses, registrations and other certifications at the very beginning. Experts believe that it is good to prepare all legal papers and official works for a business.
        • One of the main parts of this construction business is heavy equipment. When you are planning to deal with construction sites it is necessary to purchase or rent good and reliable heavy equipment. It is not an easy job to buy a good machine; you cannot predict that whether it can function well or not. Thereby it is good to take advises from experienced people. They can surely assist you in this business.
        • It is essential to make a good relationship with suppliers and other contractors. Any expert can help you to find out a reliable supplier.

        Therefore, if you are planning to start this business, go and talk to an experienced person and take his/her suggestions.

        Related articles across the web

        Tips for mixing lime in the soil with a caterpillar SS250 Mixer

        Lime has been used widely as a key ingredient in construction for centuries. It has been used for many purposes like lime wash at building construction, site preparation, calcium silicate brick, insulation materials and many more. With fine design and good techniques of construction, lime can be mixed with soil chemically and make the unstable soil stable. For construction purposes lime is mixed with soil using a caterpillar mixer to different degrees to modify the soils. This kind of mixing along with proper design, testing and construction techniques gives the soil a stabilised form permanently.

        Use of Caterpillar SS250 Mixer in Mixing Lime with Soil

        The lime should be mixed with soil in a definite proportion so as to ensure its strength. That’s why the engineers have designed Caterpillar SS250 mixer to do this task perfectly. This mixer, at first blends the poorly graded soil into fine and tiny particles. Then it mixes hydrated lime or quick lime in accurate measurement with the soil that is already present in the mixer. By doing this, the mixer increases the capacity and friability of the soil. This kind of mixing lime with soil minimises shrinkage. It is generally done with cohesive soils which are wet. The wet soil is dried in the process. Caterpillar SS250 mixer can also mix lime and fly ash into the fine soil particles. But this mixture contains low strength as compared to the previous method. It contains duck feet. This mixer increases the compacted density and shear strength of impermeability of the mixture. Some of its other uses are cited below:

        • Improves workability
        • Increases the stiffness
        • Reduces plasticity
        • Enhances durability and potentiality.

        How Caterpillar SS250 mixer works?

        • Drying:- It immediately hydrates the water present in the quicklime and gives out heat. This hydrated lime reacts with the particles of clay. These reactions add to the drying process. In return, it gains stability.
        • Modification:- After the initial mixing stage, the mixer enables the hydrated lime’s calcium ions to move to the clay particles’ surface to displace the water. This process helps in increasing the compactness. During this process, plasticity of the soil reaches its minimum and hence it minimises swelling and shrinking too.

        Features of Caterpillar SS250Mixer

        Mixing of lime with soil using a Caterpillar SS250 mixer has really some advantages. It has the following features which make it to stand out among other mixers used at construction sites:-

        • Auto-lube pulvimixer
        • Rear steer and down-cut mixer which can be changed quickly
        • Open operator station and soil rotor
        • 28L X 26 front tires
        • Water system
        • And lastly it has spade teeth.

        To sum up, we can say that in mixing lime with soil, Caterpillar SS250 Mixer is economical and accessible in the long run. It can make heavy mixing work at construction site easier and smoother. Then, why wait? Just turn on steam and buy this wonderful mixer today to get your work done in seconds.