Category Archives: heavy equipment

Utilize Caterpillar D3 Bulldozer for Agricultural Land

Very often, the word ‘bulldozer’ is used in the list of heavy equipment but actually it falls under the category of tractors. Many of the farmers are unaware of this fact and think D3 dozers as the heavy construction equipment. This piece of writing will make them understand the benefits of D3 in farming applications. Nowadays, Caterpillar D3 bulldozers are used by the farmers to develop the fertility of the land.

Factual Information about D3 Bulldozers

D3 bulldozer is often recognised as D3 crawler tractor that is employed to shift land, echelon land and for destruction. The engine of the D3 dozer has 5.2 litre diesel in it. This motor has the capability to produce maximum 62 KW of horsepower. The diesel tank has the capacity to hold 30.1 gallons of fuel. It has the competence to hold an utmost freight of 13,980 kg. This bulldozer runs in the speed of seven miles per hour. There are three gears in the front side and one gear in the opposite side of the bulldozer. When the dozer blade is fitted in the device, its total length is 12.1 feet and without blade, its distance end to end is 9.1 feet. The customers get the helm track in the size of 6 feet and floor clearance of 1 foot.

Security Tips for Bulldozer Users

  • The trained bulldozer drivers should go through the manual section before using the machine. The test drive is must for them so as to avoid accidents.
  • The mechanical back up alarm helps the bulldozer driver to call the workers in the site in emergency. The volume of this alarm is so loud that it can be hear from any corner of the site.
  • It is very important to know for the bulldozer operators that whenever they have to refuel the machine, it is sensible to shut off the engine.
  • The rollover protection structure (ROPS) attached in the bulldozer help the drivers to run the crawler safely.
  • It should be necessary to wear hand and foot hold safety tools whenever there is a need to mount over the parts of the machine.
  • Always employ overhead security whenever there is a need to use bulldozer on a high altitude material.
  • The bulldozer machinists should always be conscious if they have to use it near a trencher or an excavator.

Procedure to Make a Road Using a Bulldozer

The workers should cut down the big trees that are in the lane before they utilise dozer. It is advisable to the bulldozer drivers that never use crawler to curb out the large trees form the ground. With the blade of the bulldozer, thump the remnants and thrust them away so that it will not create an obstruction on the path of the bulldozer. The bulldozer helps to swell the gravels on the road.  When the pebbles are compressed by the bulldozer, it gives a smooth appearance and never washes out in stormy rain.

Importance of Armoured Bulldozer in Battle Ground

Universalized in 1920 and utilised profoundly ever since, bulldozer is an incessant tracked tractor that falls under the category of heavy equipment. It is a crawler that is bedecked with a sizeable metal platter. The application of the bulldozer is to shove a large amount of soil, debris, sand or other construction materials. Very often, laborers recognize this heavy equipment as a dozer. It is a crawler that is assembled at the rear with a claw-shaped mechanism. This apparatus is known as ripper that is applied to slacken the thickly condensed substances. Armoured bulldozer is a fundamental contrivance of battle engineering.

Use of Armoured Bulldozer in World War II

The British were the first to employ armoured bulldozer in World War II. The soldiers used stereotyped Caterpillar D8 Bulldozer that was adjoined with armour. It helped the bulldozer drivers to protect themselves and the engine from the attack of the enemies. At that time these armoured bulldozers were manufactured by Jack Olding and Company Ltd. The British soldiers referred these bulldozers as “Hobbart’s Funnies”. In the Battle of Normandy, the armoured bulldozers were used to clear the incursion beaches of hindrances and to create roads. When the military persons reached Europe, they realised the need of Centaur bulldozer. This bulldozer was very much effective in battle grounds for instance in Korean War.

Modern Use of Armoured Dozer

Some of the eminent contemporary bulldozers are Caterpillar D7 and D9. These dozers are bedecked with the tanks that have blades. Some of the attributes of current toughened bulldozers are as follows:

  • Caterpillar D9 bulldozer is used in military as wells as construction purposes. It is chiefly utilised by Israel Defence Forces and United States armed forces. This bulldozer has the capability to bear up profound attack.
  • The modern dozers have the power of 405 to 410 horsepower.
  • The drawbars pull capability of this updated bulldozer is 71.6 tonnes-forces.
  • The D9R bulldozer can be operated by two crew members.
  • The armour kit installed in the IDF modified bulldozers defends the motorized system and the compartment of the operator.
  • The bulletproof casement of the IDF bulldozers protects the engine and the bulldozer machinists from the machinegun, sniper blaze and grenades.
  • The RPG rounds can be averted by the slat armour. Sometimes the D9 bulldozers are available with the attributes of smoulder projectors, grenade installers and crew-functionalised machine guns.
  • D9 bulldozers are mainly utilised in excavating moats, saving stuck, glade landmines, accumulating sand blockades etc.
  • The Palestinian soldiers used these D9 bulldozers to open secure path for IDF armies.
  • These bulldozers are also employed in cleaning bushes and structures.

Application of Armoured Bulldozers in United States

The US armies bought Tractor Protection Kits (TPK) from the Israel Military Industries at the time of first Gulf War. They used it in their Caterpillar D7 bulldozers. These are significantly utilised in mine cleaning purposes. D9 bulldozers are operated by the US soldiers to destroy the vehicles from dig channels and roads.

 

 

Different Heavy Equipment Software can help the construction process

In maintaining the heavy construction equipment, the software solutions are the best ways. There are many software solutions that can cater to all the difficulties related to fueling, controlling, servicing a many other factors of the heavy construction equipment. Among the many software solutions, the most popular ones are the:

  • Dexter + Chaney equipment management solution:

What the heavy construction equipment needs in order to manage the equipment through software solutions are preventive maintenance, a tracking system for the equipment that can also be operated through a mobile application. This is a cloud based software program namely the Spectrum Construction Software that can work seamlessly without the installation of separate software or hardware devices. This software can be operated through the Apple iPhones or the Android mobile phones. The Spectrum Construction Software offers the field workers the opportunity to provide information from the site, automatically synchronizing with the mobile system.

  • Trimble VisionLink 2.4 construction software

This software program integrates various features including the fleet and the asset management, the productivity of the equipment, the amount of materials used at the site and many more. All of these tasks are performed by the 2D Project Monitoring system. This system lets the managers or staff at the construction site to monitor the time cycle, the load counts and also calculate the distance of the hauls. Not only these calculations, but the cumulative volumes of work also can be analyzed through this software program. Even at the time of the movement operations for materials at the work site, the movement or the positional change of the equipment is recorded by this software. Apart from these, the other things that need to be mentioned as the features of this software are the ability to record the distance and the location of the equipment, the timing of its performance and the timing of dumping etc. This software is very helpful in maintain the record of the real progress by the equipment at the work site.

  • PlanSwift Construction Estimation and Takeoff Software

The flexible and the user-friendly digitizing process that is present on a screen is the unique selling proposition of this heavy construction equipment software. By simply clicking on the digitized screen, the owners and the operators of the vehicle or the equipment can calculate the labor charges and the cost of the materials all at a single click. In almost every industry including the residential and the commercial, this software and the blueprint utilizing technique can solve many difficulties in every problem. Even the cost of this software is quite less than the other software of the similar sort. It is simple to operate, affordable in terms of cost and almost anyone can handle this software. Even the staffs can also run this software.

There is quite a number of software of the similar sort. If you want to enjoy the benefits of one of these software, then you will have to simply buy one and install it to your system.

Use Caterpillar D10 Bulldozer with Elevated Drive Sprocket

Have you ever operated any Caterpillar bulldozer product? If ‘no’ then this article will definitely help you to make understand the importance of Caterpillar D10 bulldozer. Bulldozer is a type of crawler that is mainly found in heavy industry factories, construction sites, mines, and farms. It is bulky and potent trailed heavy paraphernalia. The tracks help the bulldozers to hold the ground tightly in the jagged topography zones. Caterpillar D10 bulldozer is mainly employed in the mining and construction sites. Here, the labourers and the miners come to know the applications of efficient D10 bulldozer manufactured by Caterpillar Inc Company.

Antiquity of Caterpillar D10 Bulldozer

The first model of D10 bulldozer was D10X1 that was presented in the year 1973 in the business meeting of Caterpillar Inc Company. This mechanism was invented due to the need of a large tractor. Within some years, this Caterpillar D10 was popularised in the whole world and the East Peoria Plant of Caterpillar Company produced 1000 D10 bulldozers in between the year 1977 and 1986. At that time, a large number of heavy equipment manufacturing industries of different nations tried to build competent bulldozers just like caterpillar D10. Some of them are D455A, Fiat Allis 41-B, Con Expo 69 etc. Later the invention of the N-series tractors downgraded the demand of D10 dozer. For this reason Caterpillar company replaced D10 bulldozer with D11 N.

Structure of Caterpillar D10 Bulldozer

Some of the structural features of this D10 bulldozer are as ensues:

  • The power capacity of this dozer is 700 horsepower (520 KW).
  • The customers can get the facility of 19 foot U-blade tool with this dozer if they order it at the Caterpillar Inc Company.
  • Earlier the U-blade attached to this dozer was available in the weight of 82,000 kg but nowadays the modern blades are obtained in the weight of 86,000 kg.
  • The conventional U-blade was 7 feet high and has the capacity to ram the soil up to 35m.
  • The modern D10 bulldozers are used in 777 off-highway dragger.

Benefits of Elevated Sprockets in D10 Dozer

  • The elevated sprockets abolish the final coerce structure.
  • Inclined to frequent failure is another attribute of lofty sprockets.
  • This sprocket is constructed in modular shape.
  • It helps to smash down the tracks and eradicates constrain sprockets easily.
  • The modular design of the sprockets helps in removing the diffusion from the rear.

 

Chief Qualities of Updated Caterpillar Dozers

  • The Caterpillar bulldozers proffer additional facilities to the customers like engine efficiency, cost diminution and recuperating workers.
  • The financial system of the fuel is improved by the fans and the eco-operating form of Caterpillar bulldozers.
  • The cab enrichment quality gives the bulldozer machinists to stay in comfort and safety cabins.
  • The productive feature of the machine increases because it is supported by the electro-hydraulic, authentic power trains and committed hydraulic tools.

Additional facility of adaptable undercarriage enhances the quality of the Caterpillar bulldozers. In the early years of 1970, Seal and Lubricated Track (SALT) system was pioneered by Caterpillar Inc Company and still this technique is famous in heavy equipment manufacturing organisations.

 

 

 

 

Renting Heavy Equipment Is No Longer a Lucrative Option- Taking a Look at the Probable Reasons

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Heavy equipment have always been an integral part of the construction industry. It is impossible to be in the construction arena and not get involved with the heavy equipment. And if that is so, then you must be aware of the rising debate between renting of heavy equipment and buying brand new ones.

Renting Vs Buying Heavy Equipment

It is often seen that people involved in construction face a dilemmatic situation wherein, they are unable to decide if renting heavy construction equipment would be a more lucrative option or investing in a brand new one would be better. To look at it, both the deals have their own set of pros and cons that needs to be considered. While renting heavy equipment for a short period of time is quite a good option, buying brand new equipment is better if you are looking for long term utility. Finances are also another factor involved in the whole thing. While renting heavy equipment may seem to be a cheaper alternative in the long run, there is no denying the fact that the overall experience is quite high.

Why Renting Heavy Equipment Is No More A Lucrative Option?

Start up construction companies and even established construction companies have always considered renting heavy equipment a more lucrative option over investing in brand new ones. Things have, however, undergone a change- renting is no longer that lucrative an alternative as it used to be. Let us peek at the reasons as to why this is so?

  • The first aspect in the renting of heavy equipment that one needs to consider is the economic aspect of the entire affair. Renting heavy equipment over purchasing a brand new one may seem to be economically lucrative initially, but with the passage of time, it tends to get more expensive. You have to constantly pay for using the machine and as a result the overall expense goes up by a considerable amount.
  • If you invest in brand new heavy equipment, then you will have the liberty of using it as and when you wish to. However, if you opt for rental equipment, you have to depend on the rental house renting out the heavy equipment.
  • Maintenance becomes another key issue in the entire renting procedure. If the heavy equipment suffer any kind of damage during its rental period, then you will have to pay for the damage done and therefore, comes about an unwanted hike in the expenses.
  • There is also the fact that the rented heavy equipment has been operated by multiple operators and as a result, there is always a question mark with regard to the working condition of the equipment.

Along with all of the above factors, there is also the fact that in times of need, construction companies are left with no alternative other than to rent heavy equipment, even if it comes at a price far exceeding its limits. It is, therefore, not at all surprising that the business of renting out heavy equipment is slowly becoming an option less opted for.

Related articles across the web

Heavy Equipment Strobe Lights- For Those Who Need To Work Late Into Night

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Being associated with the construction industry comes hand in hand with dealing with heavy equipment. It is not really possible to be a part of the construction area and not have the slightest inkling about heavy construction equipment. Hazards form an inevitable part when it is handling of construction equipment that is in question. Construction site supervisors, thus, need to be constantly on the lookout for possible mishaps and take measures to avoid them. Making use of heavy equipment strobes light is one such measure that could be taken to enhance safety at construction lights.

What Are Heavy Equipment Strobe Lights All About?

Completing a certain construction project within the deadline is an issue of great importance. If you are associated with the construction arena, then you might find yourself working well into night in order to meet this deadline. And it is here that the importance of a good lighting system comes in. not only does it allow continuation of work at the construction industries, it also ensures the safety of the on-site workers along with other people in the vicinity of the construction site.

In order to meet this requirement comes in the necessity of strobe lights. Strobe lights might come in a variety of forms. They may be either portable allowing users to carry them about or fixed to a certain area. Heavy equipment strobe lights are generally the portable type allowing them to be put to use with specific equipment as per requirement. Heavy equipment strobe lights light up the construction area by means of flash lighting, not unlike that used in photography. Capable of producing flash energy of 10 to 15 joules, the strobe lights can produce flash lighting amounting up to several kilowatts. This lighting is achieved by means of heating up of the xenon gas that is stored inside the strobe lamp.

How Is Heavy Equipment Strobe Light Used In The Construction Industry?

Heavy equipment strobe lights have been found to be dead useful when working at construction sites even after the departure of daylight. Not only do they allow construction workers to see what they are doing, they also save the day from unwanted hazards. The heavy equipment strobe lights also find utility in the road construction industry. These powerful lights in addition to allowing workers to continue with their work at night also serve as a kind of warning for approaching vehicles, thereby, avoiding accidents. There is also the fact that strobe lights have been designed in a manner so as to suit all weather conditions, making them all the more indispensible for the construction industry.

So, if you have got a deadline to fulfill with your latest construction project and need to work late into night to finish it off, it is best if you make use of the heavy construction equipment strobe lights for the purpose.

How to Operate a Dozer? Get To Know the Basics

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Are you just about to make a foray into the construction industry? If yes, then the very first thing that you will probably want to do is getting to know about the various heavy construction equipment that from now on are going to be your companion for a major part of your day. And among the many heavy equipment that rule the construction fore, nothing is perhaps as significant as the dozer.

Dozer- An Essential Part of the Construction Industry

Perhaps the very first thing that you would want to know is what is a dozer all about? Short for a bulldozer, the dozer is perhaps the most commonplace earth moving equipment that is there on the block. Primarily consisting of a secure coop for the drivers, tracked chassis, a ripper claw at the back end and a number of front mounted blades, that the dozer makes use of in order to push the soil ahead.

Operating a Dozer- Getting To Know the Basics

Now comes in the next question- how are dozers operated? Well, the very first thing that one needs to understand in this context is that operating a dozer is quite complicated and should be entrusted to people who are well trained in this aspect. However, it is best to be aware of the basics before setting foot in the arena.

  • A majority of the controls are devised in such a manner so that they are able to operate the tractor; only one of the controls is devised to control the blade.
  • The operator would do well to be ready to bring the dozer to a halt any time after turning on the ignition.
  • You will have to make use of the joystick, usually on the left in order to make the bulldozer move in the direction that you want. You will also find a joystick to your left, primarily meant for controlling the blade.
  • The operator needs to lower the blade till it touches the ground, following which the joystick has to be operated in a manner so as to scoop
  • The joystick has to be manoeuvred in such a manner so that the blade is lowered and it touches the ground. The controls will then have to be moved in such a manner so that it successfully scoops a certain portion of the earth and leaves a flattened surface behind.
  • If the operator is new in the field and has just started off, it would be better if they do not run the dozer on a slope or a steep area. It would also do well to work on a piece of land that is not as important so that the operator can get used to the mechanisms of the dozer.

If you are in charge of the construction site, it is your responsibility to ensure that the operator hired by you is well up to the mark as operating a dozer is a tad bit complex job. However, there is nothing that cannot be simplified with the right kind of approach and training.

Related articles across the web

    Rent Grader for Road Construction

    Podcast: Play in new window | Download | Embed

    Subscribe: Apple Podcasts | RSS

    Is your construction company in the list of budding firms? Are you worried about the expensive heavy construction equipment? There is no need to lose sleep because here you will get to know that currently many of the rental companies are propounding the service of leasing heavy equipment to the construction, mining, agricultural and other monopolies. It is evident that buying heavy equipment is feasible only for a leading construction company because of its high cost. Therefore the rental companies are giving prospect to the burgeoning companies to raise their positions in the market by proffering the heavy equipment on charter basis.
    Road Grader Structure
    A road grader is also acknowledged as a blade, a maintainer or a motor grader. It is a breed of architectural machine that is seen with a long blade. This blade is utilised to construct a flat facade during the grading course of action. In the archetypal miniature of road grader, three axles with the engine and cab are attached to it. These engine and cab are fitted above the rear axles at one end of the vehicle. And at the front end of the grader, the third axle is equipped with the blade in between. In countries like Finland, the rental companies supply the motor grader equipped with the second blade. This blade is affixed in the frontage axle of the road grader. Some of the construction workers label this machine as the blade. The capacity range of this blade varies from 2.50 to 7.30m. The engine of the road grader machine has the competence of 93 to 373kw.
    Regional Use of Motor Grader
    In the northern part of Europe, United States and in Canada, the motor graders are frequently used in removing the snow from the residential areas by the municipal bodies. In the countryside and scrubland areas of Africa and Australia, these graders are repeatedly employed in agricultural purposes. In these grasslands, motor grader acts as bulldozer to dirt the tracks in farms and ranches. These are also applied in plantation applications.
    Utilization of Road Grader
    In the earlier days, road graders were usually haggard by the animals and the human beings. Subsequently, the discovery of the motor engines brought motor trucks, steam tractors in a huge popularity and people started using it abruptly. The first self-driven grader was created by Russell Grader Manufacturing Company in the year 1920. Nowadays, the contemporary road graders are used in different industries to accomplish the task as soon as possible. Some of its functions are as follows:
    • In civil engineering diligences, motor graders are used to filter the rough grading particles and finish their grading factor completely. These rough grading particles generally come out from scrappers and bulldozers.
    • Graders are frequently used in preserving and erecting the dirt and the rock-strewn roads.
    • During the building of paved roads, graders are used to set up the pedestal path where the asphalt is to be sited on.
    Therefore, we can conclude here by saying that renting the road graders gives benefits to the construction organisations by saving their money by preventing the purchase. They assist the companies to invest their money in other requirements rather on these pricey equipments. It helps the businessmen to keep their trade in liquid.

    Related articles across the web

      Articulated Dump Truck or Scrapers- Which Is the Best Deal for You?

      Podcast: Play in new window | Download | Embed

      Subscribe: Apple Podcasts | RSS

      If you take a good look at the construction forum, then you will find that the entire industry virtually depends on the efficient use of heavy equipment. It is the heavy equipment that plays a key role in deciding the fate of a particular construction project. Hence, choosing heavy equipment with care is quite an important job for those responsible for the construction site. And things might get difficult for you when it comes to choosing between equipment of the same kind.

      The Articulated Dump Truck Vs Scrapers

      Earthmoving forms an important part of any construction project. Shifting mounds of earth to clear off a portion of the land is quite an important job. Therefore, one has to be very careful when opting for earthmoving machinery. However, this is where the dilemma of the entire deal lies in. which earthmoving equipment should one go for- the scraper or the articulated dump truck? Well, if one cares to take a look at the features, one would find that both have commendable features of their own. A scraper comes equipped with a sharp hopper fixed horizontally which can be operated vertically with the help of hydraulic power. The articulated truck, on the other hand, has an uncomplicated pivotal system that makes it easy for the truck and the cab to detach, thereby enhancing control of the equipment.

      Which Should Be Your Choice- The Articulated Truck Or Scraper?

      Now arises the crucial topic as to which should be your choice- the scraper or the articulated truck? Well, it all depends on the purpose for which you will put the equipment to use. Is it is mining and the suburb that forms your area of concern, then scrapers should be your choice. The sharp hopper of the scraper cuts through the soil and clay and there are attachments in the equipment that allow it to be raised and dump the earth exactly where it should be dumped. The scraper can be optimally used by construction workers when they need to cut through the soil and fill an area that is close by. The articulated dump trucks on the other hand form the best option when it comes to rocky and muddy stretches of land. The pivotal system that makes it easy to operate the equipment by separating the cab and the truck offers a huge advantage to operators. Steered and controlled by hydraulic rams, this equipment is the best choice when it comes to moving heavy load from one place to another. Making a choice between articulated trucks and scrapers can be quite difficult as both have their own set of utilities. In such a situation, the purpose for which your equipment is being put to use should form your basic concern.

      Related articles across the web

        Secrets to Boost Heavy Equipment Rental Business

        Podcast: Play in new window | Download | Embed

        Subscribe: Apple Podcasts | RSS

        Heavy equipment rental companies are those organizations that provide the heavy equipments to the different industries in rent. These heavy equipment are normally used in construction purposes. Nowadays the urge of these rental companies increase a lot because of the price rise of the modern heavy equipment.  So if anyone wants to start the business of renting heavy equipments, this piece of writing is helpful for them. Whenever we start any business, it is requisite for us to have a good knowledge about that material. Therefore it is essential to acquire knowledge about the heavy equipments before starting the business.

        Tips to Achieve Success in Heavy Equipment Rental Industry 

        • We all know the proverb that old is gold. It is usual that an old rental company is more renowned than a budding company. Therefore it is essential to understand the position of the budding company and how much effort is required to achieve the top rank.
        • It is important for a rental company businessman to check the revenue and payroll expenses weekly.
        • It is requisite for the businessman to examine in monthly basis the cash flow of his business.
        • The administration department of the heavy equipment rental company should be active and updated in monitoring and collecting receivable accounts.
        • Before starting the business it is necessary for the businessman to understand that how much money he can invest.
        • Selling of underutilised equipment helps in boosting the industry.
        • The businessman should use the rental software that assists in solving the problem.
        • There is a strategy that every equipment rental businessman should apply and that is to enlarge the guarantee period of the rental asset.
        • The businessman can save his capital by buying the old modelled equipments or the second hand apparatus.
        • It is important for the equipment rental company to give entire focus on the customers and customer’s service.

        Responsibilities of a Heavy Equipment Rental Salesman

        • It is essential for a salesman to greet the customer with smile in his face. The friendly nature of the salesman augments the interest of the customer to know the services provided by the company.
        • The salesman should listen to and understand completely the need of every customer so that the customers never feel dissatisfied with the company.
        • It is the duty of the salesman to try utmost to fulfil the requirements of the customers based on company’s policies and rules.
        • The salesman has to converse with the customer in such a way that at last the customer is totally convinced to accept the contract of renting equipment from the company.
        • The salesman should have complete knowledge about the features and applications of the equipments and also well-informed about the competitor’s service.
        • The salesman should be proficient on the computer so that he can do the computerised work like filling the contractual rental form, writes quotes and shipping orders quickly.
        • The salesman should be well-informed about the features of the new products that are to be provided in rent to other industries. He should be knowledgeable about the promotions and advertisings of his company.

        Related articles across the web