Category Archives: heavy equipment

Choose Preeminent and Cost Effective Demolition Excavator for Your Construction Site

Demolition is the known terminology among contractors and construction business owners because it refers to the destruction of a structure or edifice to construct a new building for a novel purpose. Due to the varying size and structure of the buildings different types of demolition excavators are utilised. Whether it is an old edifice or interstate viaduct, a locked plant or unused water tower – the financial side of demolition assignment basically counts on the selection of demolition excavator.

As the use of demolition excavators increases in past few years, scores of heavy equipment manufacturing companies are proffering multi talented demolition excavators that have the capability to obliterate any size of building or structure. The marvellous mechanical designs and long-lasting components assure optimal advantage in every phase of demolition. Usually, if you buy a demolition excavator from a well-renowned excavator manufacturing firm, you will surely get loads of attachment tools with it. Long reach excavator or demolition excavator is considered as the best substitute of wrecking ball. You don’t know it yet but at the end of this web page, you will have learned that if you choose the best demolition excavator, definitely it will help you in saving your money.

Top Rated Demolition Excavators

Though the process of demolition vary from one construction site to another due to the difference in the building size, but the modern demolition excavators have the ability to destruct varied size edifices easily because these are available with various attachment tools like sledge hammer, explosives, bulldozer, crowbar, excavator etc. If you are hunting for the best demolition excavator, read every word of the following points attentively:

  • W345BMH is one of the top listed demolition excavator manufactured by Caterpillar Company. This excavator is available with several attachments such as high rise cab, auxiliary hydraulics, and one piece boom and so on.
  • Another demolition excavator that falls under the top ten lists is MX447HDR. It is manufactured by Exodus Heavy Construction Equipment manufacturing concern. This excavator is obtainable with rear-view camera, material handler arrangement, cab riser and air conditioner. Its condition level grade is 5.
  • In addition to above two top rated high reach excavators, ZX450LC ultra high demolition excavator is the model of Hitachi heavy equipment manufacturing company. Its unit number is EO1127MC and engine power capacity is 350hp. If the customers desire to attach pulveriser with this excavator, they are required to pay extra cost.

Benefits of High Reach Demolition Excavators

Generally, demolition excavators are used in those industrial units where it is not possible to use explosives to demolish the buildings. In comparison to the wrecking balls, the competence of the long reach or high reach demolition excavators is much better. The contractors acknowledge it as the versatile heavy construction equipment because it performs various tasks other than demolishing for instance crushing, cutting and shearing. Long reach demolition excavator is accessible with the wrecking ball that helps the operators to control it properly. Due to its fuel efficient quality, the possessors can save money on fuel expenditure. This excavator allows the machinist to change the length of the arm to perform diverse demolition tasks.

As this web page nears the bottom, choose the best demolition excavator from the aforementioned list that completely matches with your requirements.  Selection of the suitable one helps you in enhancing your company’s brand image.

 

Related articles across the web

Be Careful While You Rent Heavy Equipment Online

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

As the internet has become so popular all over the world, doing business online is the best way to earn maximum profit. The benefits of doing online business are not unknown to us. Where the others have to pay a lot of money for buying the office building for the business, online business would save you a lot of money in that case. But, the best part of doing online business is to acquire the target consumers through the internet. In today’s busy world where people do not have the time to look for advertisements all around them, online advertisements would provide the consumers the opportunity to get the desired results. Technology has reached such a zenith that not only advertising for your products, you can even sell or buy products online.

One of the most important and mostly needed products that have a constant demand in the market is the heavy construction equipment. In this 21st century, constructions projects are the basic parameter of growth and development. And to achieve this, the heavy construction equipment has the most important role. All the construction companies are, therefore, in a constant need for the heavy construction equipment. As the businessmen of the heavy construction equipment have gone online, the heavy construction equipment can be bought or sold over the internet. Not only this, you can also hire an equipment online site, and if you have an equipment that you do not want to sell but utilize for earning money, putting it for rent over the internet is the best way to earn some money.

Factors to consider while you rent heavy construction equipment online:

When you rent heavy construction equipment online, you have to be very careful about various factors. This is because you do not have the opportunity to look at the equipment with your own eyes.

  • Make sure that the equipment you are renting suits your requirement:

When you are in need of heavy construction equipment, you must check it with all the variety of equipment that you are getting online. Tallying all the features and details of the equipment with that of your requirement is the most important thing.

  • Know about the manual and safety measures:

When you are renting the equipment, you are actually obliging to all the rules and regulations of the equipment.

Know about the rental details and papers:

Before you make the payment, you must have a clear contract with the company that is offering the equipment. Before they offer the delivery of the equipment, all these should be settled. Whether the equipment has all the papers or not, is very important. Pollution rate, oil consumption rate, all must be checked beforehand.

Related articles across the web

Sell Heavy Construction Equipment Online and get benefitted

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

The online marketing strategy has proved to be a boon for both buyers and sellers. Each and every product such as Automobiles, Consumer Durables, Apparels, Food Products, Jewelleries, and Electronics etc can be accessed in the internet with one click of a mouse. The heavy construction is not lagging behind either. Construction equipments such as Skid Steer, Grader, Excavator, Loader, Compactor etc are available online. To sell heavy construction equipment the sellers needs to find the best site for auction. No more the sellers need to publicize their products heavily to bring it into limelight. All the seller is required to do is to update the entire product with its features, prices and application on the website and the information will reach relevant operators or users worldwide. Also this helps in reducing the expenses successfully as the proprietor of the production firm only needs to make payment for the money required to register them on the online portal which is conducting the whole business of auction.

The buyers also can compare the prices and features of the different heavy construction equipments online and buy the best one which suits his requirements.

Tips to sell Heavy Construction Equipment Online

Create an Excellent Online Strategy- No doubt that the internet is a very powerful medium of buying and selling products but here the competition is fierce too. So you need to execute a good strategy to make sure that your products reach a global audience or buyers. It is important to choose reputable and popular auction sites like E-bay.com, Amazon.com etc

Make a Comprehensive Online Catalogue of product features and benefits-A feature of a product is a fact regarding it which will attract the readers or those who are interested to buy it online. Focus on presenting the features and benefits of the heavy construction equipment by using bullet points. Emphasise on the positive aspects of the device such as fuel efficient, high productivity. Also mention how it reduces various problems like decreases stress, no screen glare etc. Online list of the products can also be created and orders can be taken using e-mails or phone calls. Another strategy of selling online could be to utilize a shopping cart provider which generates a payment opportunity for the heavy equipment devices.

Find a Reliable Provider-Find a dependable and honest provider who is easy to deal with and is extremely user friendly. It is important to select a professional website where provider’s contact details. So go through the provider’s website before getting into the transactions. It is advisable to find good quality e-commerce solutions to sell the equipments.

Select your payment process-After getting prepared to sell your heavy equipments online it is time to choose the mode of payment from the customers. Make sure the payments options are safe and secure. Most of the portals accept payment via credit cards. It is advisable to so meticulous research online if you are a seller to evaluate the rates of the different payment processes. Also you can hire a third party for accumulating the payments from the customers on your behalf.

The mining and construction sector has grown enormously over the years. So if you think selling construction equipment are lucrative and money spinning this article will give you all the information regarding it.

 

 

 

 

Related articles across the web

Top advantages of using a backhoe loader

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Those who work in the constructional field know that backhoe loaders serve a lot of purpose which is used in both the constructional field and farms. Though there are many other tools which can perform the same task the backhoe is performing, but most of the people prefer to use backhoe. They unite all the other tools which are used in different jobs into a single unit.

Before buying a backhoe, the people should know all its applications and advantages. Some think that backhoe is mainly used for the clearance of debris and digging the ditches. To say the truth, the application of backhoe covers a wide range.

Advantages of using a backhoe loader

It’s quite unfortunate that lots of people invest a large sum in buying a backhoe loader. They sometimes do not even know the full usage of the loader and use it only for doing everyday jobs and for digging the gutters.  Apart from this, one can also use a backhoe loader for laying the pipes, planting the cable wire underground, setting up of the buildings and the systems of drainage. Not only this, backhoe loaders are capable to accomplish much more tasks.

One can drill some holes to plant his trees simply by attaching an auger to his backhoe. It can also be used to carry out various kinds of projects related with fencing on different kinds of soils. In order to do grading and cutting the slopes, the person can use the backhoe by joining a bucket for cleaning of the ditch on the rear. In the job of a contractor, the person has to mend the gas, roads, sewer lines and the like, he is going to required getting beneath the cement. This work can be done with much ease and quickly if he attaches an asphalt cutter with the backhoe loader. If anyone wants to operate all the backhoes and other machines of construction, he/she should use couplers of pin lock on the backhoe loaders. It will enable them to switch out all their buckets from the stockpile. In this way, a single backhoe can perform several kinds of jobs. So imagine, how easily and quickly can one work on the site with two or more than two backhoes.

Purchasing a second-hand backhoe loader

Those who are interested in buying a second-hand backhoe loader should look for top websites of auction which are offering huge deals. The owners of the used backhoes are ready to sell their equipment through bargaining to make extra profit. Most of these used machines are in excellent condition requiring very little repair. So, one does not have to invest much money in its repairing after purchasing it.

In conclusion, everyone who really craves to buy such a multi-purpose heavy equipment, must have a clear idea of all its applications, so that they carry out more tasks with this backhoe loader. It’s always better to buy a used model of the loader through the online auction, as he/she can save a large sum through the bargain.

 

How To Install Hydraulic Thumbs In Excavators?

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Construction excavators are made to design to lift heavy objects. The hydraulic thumbs in the excavators assist it to hold the freight. The thumbs are mostly detachable which moves both in the forward and backward direction to let the bucket slide around a heavy object. Steel of high quality is used to design it. It has hype bracing which adds to its strength. The working of the hydraulic thumb excavator is managed through a series of controls and levers strategically positioned to operate the machine by permitting the bucket to work like a mechanical hand. It drags the bucket towards it by squeezing the load against the excavator’s bucket. The bucket easily picks up the load and shifts it to some other place.

Applications of hydraulic thumb excavators

The Hydraulic thumb excavators are mainly manufactured to handle and load various objects with ease. They are used in the construction site to lift rocks, debris and the like which is not otherwise possible for the bucket to transport alone. You can also take out the thumb while doing normal work of excavations as it back off against the stick.

To install the hydraulic thumb in the excavator is not tiresome at all. In fact, it includes some simple steps which should be carried out carefully.

Steps to install hydraulic thumbs in excavators

  • Park your excavator on a level and smooth ground surface. You have to drop out some space to adjust the forklift in order to place the hydraulic thumb.
  • Now, place the hydraulic thumb close to the edge of the excavator’s arm on the ground. Slightly lower the machine’s arms to line up the arm’s holes with the holes in the hydraulic thumb.
  • Mount the Thumb pad to the stick of the excavator and then connect it with the hydraulics.
  • The gap between the bracket of the hydraulic thumb and the bucket should be at least one inch. The bucket should not touch the base of the thumb plate in curl up position.
  • Lock the thumb properly to prevent it from jiggling and down drifting.
  • The teeth of the excavator and the bucket should be aligned in left to right direction. To do this, you have to pull aside the bucket and lengthen the thumb. Check all the positions of the hydraulic thumb to make sure that the thumb hooks align with the teeth of the bucket.
  • After that, go for welding the arms of the equipment. Welding should always be done in parallel with the axis of the excavator’s arm.
  • The sealing and the lubricants should be replaceable one. Try to use pins and bushings which are already treated with heat so that heat cannot damage it easily.

You should perform some tests to nail down that the bucket and other connectors squeeze the hydraulic thumb. Any kind of failure to carry out the test will have adverse effects on cylinders, pins, sticks, brackets and thumbs. Don’t just waste your time in thinking, go forward, think straight and install the Hydraulic thumb to enlarge the sphere of the excavator’s application.

Related articles across the web

Types of renting heavy equipment

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Most of the equipment manufacturers have an affiliated renting company. It permits them to assist their customer’s monetary transactions quite easily.

There are three main types of renting- finance renting, operating renting and contract hire.

Types of renting

  • Finance leasing: – It is also known as full payout lease. This kind of leasing or renting helps you to get all the financial advantages and risks without any legal title. This renting rate is calculated to get the total value of the asset including finance costs during the contract time period. The asset is handover to a third party at the end of the renting period. Here, you can get a lion’s share in the proceeding sales. This can happen only if the renting period is not extended. You cannot become the owner of the equipment at anytime, unless you go for a private arrangement with the third party. As you can extend your renting contract period and already have paid almost the full amount during the initial phase, so you have to pay very little during the later extended period of the contract. It is sometimes referred to as “papercorn rental”.
  • Operating lease: – Unlike financial leasing, operating renting is like a regular rental. It comes with a smaller time period. The renter here tries either to sell the equipment in a second-hand market or to rent it again to avoid the need to regain the total asset price by the regular lease payments. There may be a choice for elongating the renting span at the end of the initial rental phase. Just like the financial renting, you cannot become the owner of the equipment at any point of the time. But, contrary to financial leases, you will not get a single penny in the sales procedure.
  • Contract Hire: – It is another kind of operating lease which involves a lot of services such as management, maintenance or replacement if the equipment needs to be repaired.
  • Hire purchase:- In this kind of leasing agreement, you will get an option to purchase the equipment. They will confer the legal title to you when you have cleared al the payments. The term of a hire purchase should be notably shorter than the working life of the equipment. As you have bought the machine outright, you can easily claim capital allowances from the renting company to make as much profit from it as you can. Hire purchase agreements are written especially for domestic users only. Business owners can avail this type of renting.

 

It is very important for you to count on your future needs. Every kind of renting option has its own merits and demerits. It will have an everlasting effect on your monthly payments. The renting payment heavily depends upon the total value of the equipment, rate of interest and duration of the renting.

If you have any query regarding the procedure of renting and its terms and conditions, then you should immediately seek the help of your advisor for further assessment.

Want To Protect Your Heavy Equipment From Theft – You’ll Find This Helpful

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

You must have come across this many times when one fine morning, you are informed by your employees that a particular part of heavy equipment is missing. You get up in a state of shock and wonder how this can be possible and what use a part of an equipment would be for any person. Well, such thefts are quite rampant in the entire US and one got to be very vigilant to ensure that his things are at place. Many a times, the entire machine gets stolen and shipped to other country and you are left with miseries. Before we begin noting the possible solution for this problem, let us first understand the reason why one would steal parts of heavy equipment or the equipment as a whole.

The market for stolen equipment is very big in the United States and the money involved in this business is huge. Therefore, it has gangs that have the skill to open up equipment and carry away few important parts of the machine in no time. The people who are running this business never fall short of men and therefore in spite of the cops taking every possible action to nab them, their counts keep on increasing.

Let us now discuss what could be done to contain this problem so that you do not suffer loses.

Keep your documents in place:-  Ideally, most owners of construction companies lose the track of important documents pertaining to the equipment they have bought. Due to this, if the equipment is stolen, it could not be traced by the cops and they end up taking all the trouble for nothing. Hence, it is crucial to keep all your documents like model or the serial number, the manufacturing year of the equipment, photos etc. that will prove to be helpful to the cops to catch hold of the miscreants.

Conduct a sound background check of your employees:-  It is highly recommended to do a thorough background check of all your employees and employ only them who have a clean record with no criminal background. Alternatively, it is prudent to keep a watch on employees whom you find to be suspicious. Questioning them directly may not be the right way to deal with them but checking their behavior may give you some idea if not all.

Maintain a register:-  You should maintain a register where you can keep a record of people coming in and going out of the site. Alternatively, you can also employ security personnel who will check the employees every time they enter or exit the construction premise.

Install cameras at different locations:-  This should be really helpful in nabbing the culprits. If the thieves do not know that you’ve installed cameras would definitely make the mistake of not wearing masks and that will help the cop nab them. However, if at all the thieves know that there are cameras installed, they would rather look out for some other place and may skip yours.

Heavy Equipment Lease Application Form Fill Up Process – Is It Time Consuming?

The process of filling heavy equipment lease application form does not take up a lot of time. Yet, you should need to be prepared intensively and methodically before you fill the lease application form. It not only saves your valuable time but also helps in forestalling the delays during form fill up.

Majority of the clients of any heavy equipment leasing company are industrialists and businessmen. May be this is the reason why one of the most frequent questions comes in the mind of business tycoons regarding the time takes for claiming heavy equipment in lease. Usually, the entrepreneurs are very busy and drawing out time for filling lease application form is not an easy task for them. But, here is good news for those busy personalities that nowadays, equipment rent form filling procedure takes very short time because of the advent of internet. Why the applicants should focus their time in arranging the data requisite for heavy equipment hiring form? Here in the below discussion you will get the answer in detail. Just go through it.

Application Form Depends on the Type of Heavy Equipment

Before you select your desire leasing company, it is necessary to understand the particular paraphernalia suitable for your purpose. Often the weighty apparatus renting firms asked the construction and mining companies to show their equipment vending written requirements and if the companies submit the data in time, it will take only a few minutes to accomplish the process of form fill up. Moreover, the apparatus leasing corporations enquire the clients about their future plans in business development. The application format of every renting company is not same. Therefore, it is sensible for the capitalists to go through the website of the renting concerns because there they get to see the layout of the submission form. For instance the data required for leasing an excavator is entirely different from the dozer.

Essential Documents for Equipment Letting Application Form 

Prior to the form filling procedure, the industrialists must collect all the important documents for the application method. Here in the below mention points, some of the basic documents demanded by the leasing firms are given:

  • Full name of the possessor
  • Sponsors of the enterprise
  • Federal tax ID
  • Social security number
  • History of the company
  • Contact address of the head office and branch office

Conditions in Bulky Paraphernalia Application Form

Once the mining and construction companies sort out the issues of financial related matters with the apparatus leasing companies, now they have to choose the term period for the particular heavy equipment. Usually, most of the letting organisations provide their clients with two sorts of term periods – two years and four years. If the traders select the four year term, then the monthly hiring disbursement amount is less. It is a vital decision so as to avert the problem of cash flow.

The heavy equipment renting firms facilitate their customers with three assorted choices of end-of-term that are Fair Market Value, $1 buyout and 10% purchase. The industrialists should be careful in these matters when signing the agreement with the weighty apparatus leasing organisations.

Choose Suitable Motor Grader for your Construction Business from the Top Ten List

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

With the development made in motor graders, large numbers of construction companies are procuring this heavy equipment for exhuming and shaping the surface accurately where footpath will be placed. In past few years the heavy construction equipment manufacturing organisations continuously proffering various sizes of motor graders with upgraded version to satisfy the punters completely.

Motor grader is construction equipment that is also recognised by the contractors and construction personnel in the names of grader, a maintainer, a blade or a road grader. Usually, motor graders are obtainable with a blade that is fitted between the facade and rear helms. If you are in the field of civil engineering and want to know about the latest demanding motor graders, then start reading every word of this following piece thoroughly and come to know about the top ten models of road graders.

Top Ten Appealing Heavy Motor Graders 

G930B is an efficient motor grader which is manufactured by Volvo Construction Equipment Company. This bulky paraphernalia is equipped with tier-4 engine and multiple power settings. Care track telematics is its special feature. The customers can also get the choice of 11 speed transmissions.

GD555 is the medium size grader that is constructed by Komatsu construction equipment organisation. It is available with the blade girth of 14ft and 12ft respectively. This equipment has the features of forward mount power train and long wheel base.

12M3 road grader is the product of the well-renowned construction equipment manufacturing company, Caterpillar. The speed of the engine equipped in this bulky grader is 2000rpm. Due to its emission reduction technology, it is acknowledged as the most durable motor grader in the souk.

G940B is the popular motor grader of Volvo Construction Equipment Organisation. This bulky loader is equipped with tier-4 engine that assists in increasing the torque and power qualities. It delivers optimum power in every gear and reduces the fuel consumption and helm slippage.

845B is the renowned motor grader that is built by Case Construction equipment manufacturing company. The ripper of this apparatus has the ability to put up five teeth in total. Due to its multi-radius involute mouldboard design, its fuel efficiency power is excellent.

140M3 is a type of road grader which is facilitated to the punters with power shift, direct drive and APECS transmissions. The brake parking quality of this apparatus gains popularity due to the use of multiple oil disc. The pump type of this Cat motor grader is variable piston.

G946B is the eminent motor grader of Volvo Construction Equipment concern. The 11 speed transmission option of this grader helps the machinist to work with slower gears for fine grading process. Its exclusive feature is the care track telematics.

14M is the Cat M series motor grader which is obtainable to the customers with the bore and stroke facilities of 5.1in and 5.5in respectively. The maximum velocity of this grader is 31.3mph.

865B motor grader is the efficient product of Case Construction organisation. Its operating weight is 33,796lb. The engine power of this equipment is available in varied options like 178, 190 or 205hp.

24M is the M series grader of Caterpillar construction equipment manufacturing company. In its first gear the base power is 533.0hp. The maximum system pressure of this apparatus is 3500.0 psi.

Road graders are being manufactured with refined control units so as to permit the machinists to do the complex works easily. So, if you want to procure the most suitable motor grader for your construction business, then browse the internet to know more information about these abovementioned models.

Related articles across the web

Making the most from your oil analysis data

Oil analysis also known as OA is used to get accurate information of the lubricant and the condition of the machine. With the help of oil analysis one can eliminate heavy costs involved in the maintenance of the machine. Tribologists are there to interpret the data of oil analysis.

Oil analysis helps to identify two primary oil conditions that can cause hazards to the equipment:

  • Measuring the acid number and oil viscosity help to detect the chemical changes that has occurred due to thermal degradation of the oil.
  • Metallic contaminants in the oil are detected by Atomic Emission Spectroscopy which also indicates lube mixing.

Tribologists use the Oil analysis data and distinguish the new oil from the used one to replace the oil at the correct time. A careful Oil analysis data sometimes make the oil sweetened either by putting some quantity of fresh oil or by adding replenishing additives that were drained.

What is the use of oil analysis?

  • Amount of dirt contaminants present in the oil.
  • Fuel liquefaction of lubrication oil.
  • Limitless bearing wear.
  • Quantity of antifreeze in the oil.
  • Lubricant is correctly applied or not.

Through oil analysis one can peer inside the engine, transmission and hydraulic system without dismantling the machine.

How to take an oil sample for oil analysis?

An oil sample represents the condition of all of the oil in the machine. It is useful to get the oil hot and thoroughly mixed before taking it as a sample.

Taking the oil sample at the time of draining is more preferable because during draining some of the used oil will be drained and one could store the remaining oil in an appropriate container.

One can have oil sample by sucking out the oil by connecting a plastic tube with the oil reservoir.

How to choose the best oil analysis laboratory?

There are many oil analysis laboratory and choosing the right one is definitely a herculean task. Some points are given below that may help one to choose the right laboratory.

  • Turnaround time is one of the most important factors. It means the time which the laboratory has taken to test the sample. It should be 24 to 48 hours after the sample has been received by the lab.
  • Alert notification through email, telephone call, fax or by sending message should be given to the person if some kind of abnormality is detected during testing.
  • One has to find out whether the industry is specialised in that kind of testing equipment’s oil or not.
  • The analyst should interpret the environmental information, condition of the fluid, contaminants parameters and machine wear parameters and directs the person for the next step that should be taken to save the machine.
  • One should find out a laboratory that performs wide range of tests and not only one that fits the person.
  • Oil analysis test is mainly based on “you get what you pay for.” So one should not prefer price over quality service.

Oil analysis data serve as a tool to measure the condition of lubrication management procedure. So it is important to make the most from oil analysis data and prevent the machine from its early breakdown.