Category Archives: Construction

Ensure That Your Construction Equipment Is Working Fine With the Heavy Equipment Grease Guns

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

One could easily equate working in the construction industry with the active use of heavy equipment. If you are an active on site construction worker, then you will find it hard not to work with construction equipment. Keeping this aspect in mind, one could easily decipher the importance that the smooth operation of the heavy equipment holds on the area.  This can only be possible only be possible when the equipment are maintained properly.

What Are Heavy Equipment Grease Guns?

Since the successful completion of a construction project largely depends on the smooth operation of heavy equipment, the importance that the maintenance of these equipment holds in the entire deal is quite evident. There are a number of devices on the block that are used for the maintenance of heavy equipment. One of them is the heavy equipment grease gun.

Generally speaking, a grease gun can be defined as a tool commonplace in workshops and garages, mainly used for the purpose of lubrication. In the construction industry, this device is used to apply grease or lubricant to certain parts of the heavy equipment when they are unable to operate smoothly due to increasing friction. A typical heavy equipment grease gun is used to administer lubricant by means of an aperture to a specific area, generally termed as the nipple or grease fitting. The aperture of the grease gun is designed in a manner so as to fit perfectly with the aperture of the mechanical apparatus to be lubricated. This ensures the application of the lubricant only where it is absolutely required.

Why Is Your Grease Gun Not Working?

The heavy equipment grease gun holds quite an important position as far as the smooth operation of the heavy equipment is concerned. And it certainly would not do if the grease gun that you are using does not operate properly.

  • Heavy equipment grease guns are likely to stop functioning if they get clogged over time with the accumulation of debris and the hardening of the lubricant over time. Getting rid of these impurities with the help of a pointed tool such as screwdriver or a pin has been found to be a great solution in such a situation.
  • The heavy equipment grease gun may also stop operating owing to dysfunctional or dead batteries. Recharging the batteries after detaching them from the device can solve this problem for you and get things going again quite smoothly.
  • If the heavy equipment grease gun used by you is a pneumatic one, then air leakage or blockage might pose a problem in the smooth operation of the device. There are seals on such grease guns that need protection from cracks, rots or decrease in air pressure.
  • Heavy equipment grease guns might also stop operating if it runs out of lubricant. You need to refill the grease gun in such a situation to make it work again.

Heavy equipment grease guns have been found to be the most useful device when it comes to lubrication of certain pars of the heavy equipment for optimal functioning.

Usage of heavy equipment for land clearing

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

To fitly maintain the land, it’s important to clear the land by ripping out unwanted trees and the undergrowth. You have to use heavy land clearing equipment like mulcher and grinder to perform the job. These equipment are utilised to manage the land and drains, construction of fire line and landscaping. Both renting and buying of the equipment are the two open options in front of you, you can opt for renting as it is cheaper. But the handling of such heavy equipment is not that much easy. So, if you don’t have the training to operate it properly, you should hire an expert who can easily do the task for your sake.

Types of land clearing equipment

Mulchers and grinders are the two types of equipment that the construction personnel used to clear the land. The attachments of the mulcher cut down bushes and trees, and level the ground without causing any harm to the landscape. It grounded the brushes into mulch which is later on replenished by returning it to the ground again. The equipment is eco-friendly releasing no harmful gases, and hence it is more preferred by the specialists to bulldozers.

Mulchers are sometimes attached with skid steers or excavators. The blade of each mulcher is different from the other one. The proficiencies of the blades directly depend on the terrain type and the brush which it is going to cut. The mulchers used in small excavators are undersized with the capability to withstand heavy loads.

The main application of stump grinder is to uproot the stump of the tree while not touching the sawdust. It does the work very quickly, which helps the operators to remove considerable amount of trees within a very short time period. These equipment are also available as an attachment to mulcher in excavators. It is mainly used for land clearing to develop and after chopping down.

Advantages of using latest land clearing equipment

The latest land clearing equipment are greatly efficient which performs every clearing job quickly and effectively. The excavators attached with a mulcher are more advisable to use because it helps you to cut down selective trees without damaging the soil. It will allow you to maintain those parts which you desired and hence reduce the total expenditure on developing a property. Mini excavators with a mulch will help you to make profit when you plan to resale it as it assist one in replenishing the land.

Both the stump grinders and the mulchers deliver incomparable clearing work which automatically compels one to immediately go and purchase it from an authentic manufacturing company.

Advanced Forests, Ammbusher, Bandit Industries, Barko Hydraulics, CE Attachments, Blue Diamond, Continental Biomass Industries are some of the companies which has left their footprints by delivering high-quality lad clearing equipment. All of them are cost effective and designed to fit skid steers and excavators. These machines have variable angle cutting adjustments and variable speed.

Go now and purchase the right land clearing equipment from your selected company and do the interesting job of clearing the land with the help of the professionals.

Related articles across the web

Accidents associated with construction equipment

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Construction equipment are generally heavy and one has to be cautious at all time to minimize the risks that can happen from bad handling and lack of proper maintenance of this equipment. Heavy construction equipment used in big construction companies make the construction much faster and easier. There are always some risks associated with the heavy construction equipment which can have disastrous consequences. According to the Occupational Safety and Health Administration (OSHA), 75% of workers at construction equipment factory became victims of accidents. Some of the risks of using construction equipment are listed below.

  • Site fall: It includes roof related falls, scaffolding falls, elevator shaft falls, crane falls and falling objects. Over three hundred deaths arise from construction site fall every year. Though some companies pay compensation for the injury caused to the victim, but do you think it’s enough? Safety precautions should be taken by the construction equipment to ensure well being of the worker.
  • Roof related Falls:– Roof fall is one of the most common form of accidents. This includes skylight falls, communication tower falls and fall through existing opening. Many of the deaths and injuries can be controlled by proper protection equipment.
  • Crane Falls on Construction Site:– Cranes are designed to control enormous pieces of powerful machinery. The operators can also fall from crane due to loss of its balance.

 

  • Other common form of accidents using construction equipment are:
  • Forklifts
  • Backhoes
  • Bulldozers
  • Front-end loaders and
  • Skid Steers.
  • Steps to avoid such construction site accidents
  • Allow only trained and expert professionals for operating heavy equipment.
  • Equipment has been designed properly and safely manufactured.
  • A display of warnings on the machinery should be there.
  • Equipment is needed to maintain regularly with periodic checkups.
  • Find out whether the machine is properly carried out or not with tightened bolts, nuts and screws.
  • Check the trailer deck, stability and clearances.
  • Be careful of overhead hurdles and underground utilities like water, sewer, electrical lines, gas and telecom.
  • Find out whether any unconventional sound is coming or not from the construction equipment.

Accidents related with construction equipment is mostly categorized into two categories. Firstly, it’s improper maintenance management system and the way of its handling. And secondly, defect in the design or manufacture of the equipment including absence of proper warnings.

Sometimes there are also electrical accidents due to the construction equipment. OSHA has issued some guidelines for the safety of the workers with construction equipment and some precautionary steps that should be taken to face such hazardous accidents. Electric shock is another such common accident. It can cause many complications like muscular spasm, internal injury, cardiac arrest and respiratory arrest. A fire plan should also be there to evacuate the workers safely when an explosion occurs.

We all know the fact that accidents are not natural but they are manmade mainly because of their ignorance. So, to minimize such accidents the construction equipment companies should take proper steps and guarantee a safe life to its workers.

Tips to start a leasing heavy equipment business

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Nowadays, leasing heavy equipment business is booming. It is gaining a strong hold in the competitive world of business because of its features. Most of us who are acquainted with constructional works want to have the equipment in good condition while at the same time don’t want to invest a huge sum in that. Do you too want to start a renting heavy equipment business? Don’t know how to start it? All the businessmen should work very hard along with little calculation to establish their business properly. Are you looking for some tips on how to start the business? Okay, just check out the following article.

Tips to start heavy equipment renting business

  • Put up with the distributors of equipment to get the prices of dealers on their constructional equipment. Most of the agreements include a form fill up where you have to give every information regarding your business. You have to hold with them for a specific period’s minimum purchase which can either be on an annual or one-time basis.
  • Get the coverage of insurance. Leasing equipment means taking the responsibility of the person who is going to rent the equipment from your company. You should have enough insurance coverage to help the person in case he is injured while using the equipment.
  • Write down the renting agreement. It should encompass a liability setting aside as well as the terms and conditions such as rental time, price and the returning condition of that equipment. You should also mention in your agreement form whether you are going to demand any money from the leasing person in case any damage occurs to the machine.
  • Before you set the leasing rates, look for the rates which other renting companies are offering. It will enable you to fetch the best price. Try to set the rate properly which should be neither too low nor too high to attract more customers.
  • Are you thinking how you are going to maintain the equipment? Just relax. Technicians are available in the market who can take care of your equipment. You only have to spend some money in hiring the technicians. Don’t forget to scrutiny all their documents properly to avoid any kind of problem in the future. Try to get a well-trained technician who can repair all types of damages efficiently.
  • At last, focus on building your inventory. Set in with a fine collection of famous rented heavy equipment such as concrete saws, front loaders, sand blasters, bulldozers and the like. Try to store as many equipment in your company as you can so as to provide the customers with a greater choice.

A good rule of thumb is to deal only with the sources which will be of financial help to you. But, that financing source must have worked at least as long as the lease term. And yes, get little picky when it comes to deal with the terms. Go ahead and flourish your business using the tips.

How to distinguish if you need a new undercarriage?

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

It is very important to know when you need a new undercarriage. Nearly 20 percent of the purchase price of the crawler is due to the undercarriage. While approximately 50percent of your repairing cost will be wasted in repairing it. From this data, you surely have a clear idea of how vital role undercarriage does play in maintaining the life of your equipment. Although wear cannot be bumped off, but getting the certified parts of the undercarriage makes it running strong.

When should one need a new undercarriage?

  • Idlers is also called “Track Tensioner” as it keeps the track in right angle. De-tracking, reduced stability, absence of track tension, loosening of wheel between mounting arms and accelerated track wear are the signs which show that the idler of the undercarriage is getting damage. This is the proper time of having a new undercarriage.
  • Rollers (another important part) are of two types- bottom rollers and upper rollers. Bottom rollers support the machine’s weight through the track. Whereas the upper rollers carry the chain in its proper angle. Grinding noises, oil leaking from the rollers, sudden sideways movement when the rollers starts to rotate are the signs that indicate the damage of your roller and you should get a new one.
  • Sprockets are used to transmit motion and act as a profiled wheel. When the tips of the sprocket looks like the waved caps, grinding noises comes out, the binding of the teeth to the sprocket centre worn down and complete tear out of the metal happens, then it is the time to change the sprocket of your undercarriage.

However, routine check of oil levels of the machine, greasing the parts of undercarriage properly and unobstructed the undercarriage from rocks and debris definitely keep the undercarriage in good condition for a long time.

How to select the standard undercarriage?

  • Weight of the machine:- The size of the undercarriage heavily depends on the weight of the machine(though this is not applicable in the case of crawler tractor).OEM applications having slow speed i.e.3.5mph or even less than that are best served by Hydraulic Excavator (HEX). On the other hand, applications with more than 3.5mph speed are best carried out by crawler tractor’s arrangements.
  • Application of the machine: – The distance of the track gauge should be at least 60 percent of the track’s length on the ground.
  • Desired life of the undercarriage: – The life of the undercarriage is decided by the normal and maximum speed operating, operating environment and the quality of the job function. If your machine works in a reverse direction for most of the time, the track should also be reversed for maximum life of the component.

To buff up your business, you should have an undercarriage that can withstand the wear and tear and empower your machine to face any kind of operational challenges. The above said points will definitely aid in lowering operating cost, prolonging service life and great value.

 

 

 

Characteristics of a good heavy equipment mechanic

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Heavy construction equipment is that essential part of the construction business without which the very basic of the work would not be possible. Therefore, every construction business needs construction equipment to do their task. But the heavy workload and the tremendously hectic working schedule makes the equipment damaged quite frequently. This leads to the problem related to operating the equipment and thus the work at the construction site gets disturbed.

In such situation, what is needed to be done by the owner of the equipment is to hire a mechanic who is skilled and experienced in repairing the heavy construction equipment. The need of a skilled mechanic is not limited in case there is damage in the equipment; rather to maintain the efficiency of the equipment so that it offers maximum outcome, the equipment owners must have professional mechanics.

Factors to consider in a heavy construction equipment mechanic:

The owner of the equipment must be careful about the characteristics of the mechanic that he hires. They must include:

  • Ability to diagnose the problem:

The first and the most important factor that the mechanic must be able to do is diagnose the problem that is causing the equipment to trouble. The skill should be of the ultimate level so that he can recognise the problem by checking the apparent symptoms.

  • Skill to solve the problem:

Whether the problem with the equipment’s functioning is with the electric wires or with the hydraulic system or even with the fuel tank, identifying the problem will not be enough, if the mechanic cannot fix it fast. The longer the mechanic takes to diagnose the problem and providing a solution to fix the damage, the longer will be the time to stop the construction process.

  • Listening quality and charming nature:

Just as the doctor should listen to the patient, the mechanic should also listen to the problems and the difficulties that the owner has been facing. If the mechanic is stubborn and unwilling to listen to the owner, then it will lead to a delay in the diagnosis of the cause of the damage. As the owner of the equipment does not have any knowledge of the mechanism, it there might be several questions going on in the owner’s mind. Therefore, the mechanic should have a charming quality to relate to the owners.

  • Knowledge of the technology:

With every passing day, new technologies are being discovered in order to make the construction industry a revolutionary one. The mechanics should be aware of these technologies, software and various other features that can make the equipment functioning easier.

Without these qualities, no mechanic can be proven beneficial for servicing the equipment of your construction company. There are many mechanics that are skilled, but if they lack in the other qualities and facilities, then you will not be able to find a quick and effective solution for the damages done to your equipment. Even to maintain the efficiency and the performance of the equipment, then also you will need to hire a skilled mechanic.

Top Ten Models of Backhoe Loaders

Digital archetype has led many manufacturing companies gain a strong footing in this competitive market. In the moderate-sized market for backhoe loader, most of the construction equipment manufacturing businesses have sophisticated latest models to increase the finish quality and the outcome while being more economical on the investment on fuel.

Backhoe loaders with its emergence in 1970 have ruled the construction industry. Its variant designs by the engineers have also extends its application area. Earlier it was used mainly for digging, but now one can also use it for landscaping, small demolitions and the like.

List of Top Models of Backhoe Loaders

  • Model XT870:- This concrete machine can carry a load of upto 7300kg. The equipment’s characteristic shows that it can dig a maximum depth of 4496mm. It can run at a speed of 2200rpm generating a power of 74 KW.
  • Model 3CX Contractor: – It is an environment-friendly single backhoe loader which runs on a diesel engine of cooled 95a-turbocharged motor. The excavators comprises of ISO and technology of Easy Control on its 14’heavy lift on its edges.
  • Model H930C:– Hyundai Heavy Industries wrangled to build its latest backhoe loader to provide maximal performance to each operator with versatile preferences of machines.
  • Model 416F:- Combination of maximum comfort with flexibility definitely boosts up the productivity of the users. The upgraded hydraulic brakes and the structures of the backhoe swing make the operation in extreme and extensive site quite easy.
  • Model B100C:– These kinds of environment friendly loaders are used mainly in peopled areas. It is fitted with rubber pads which reduce the rate of damage caused to the ground while operating it.
  • Model WB93R-5:- It is one of the newest loaders in the backhoe series. The backhoe loader is user-friendly to give exclusive performance. Its add-ons cover a wide range. The model contains a bucket which has the capacity of 1.03 cubic meters.
  • Model XNWZ74180-2L: – Certified from CE ISO TUV, the model is designed with big tanks of oil and tires. Its pump is derived from PERMCO of USA. The converter transmission of hydraulic torque is driven on two wheels.
  • Model 766A:- The equipment is developed to work on a total power of 68KW.It can operate a maximum weight of 8100kg. The excavator attached to it has the maximal digging capacity of 4440m deep. The force of the bucket breakout of the loader is 58 kN.
  • Model Cukurova 88:– It gives a stable and safe steering on the highway with optimum distribution of weight. The loader also gives a solid platform to dig. The 600mm bucket is attached with powerful compact backhoe to give out highest output.
  • Model WZ30-25:- An impeccable and reliable Cummins engine is equipped with in this model. Four reverse and forward synchronised transmission of automatic shift with improved performance has popularised it. To increase the performance of the seal, the designers used a combination of sealed cylinders. Its driving option includes both 2-wheels and 4-wheels driving.

 

In conclusion, we can say that the future will prove the fact that all these innovative models of backhoe loaders have definitely provide many options to its users while increasing the business of the construction companies with its multiple uses.

 

Related articles across the web

Heavy Equipment Maintenance- Corrective Vs Preventative

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

There can absolutely be no doubt about the fact that the heavy construction equipment forms an important part of the construction industry. It is on them that the successful and smooth completion of the construction deadline depends. It is, therefore, quite obvious that maintenance of these heavy equipment holds an important position in the entire business.

The Corrective and the Preventative Modes of Maintenance

The hectic schedule of the construction arena often leads the construction workers to overlook the maintenance factor. However, that is one important aspect of the arena that people simply cannot afford to overlook. The mode of maintenance of construction equipment can be basically grouped under two heads- the corrective maintenance mode and the preventative maintenance mode.

Deemed as being one of the most popular and common approaches towards the maintenance of heavy equipment, the corrective maintenance works towards the restoration of the equipment in its original operative condition by resolving the equipment failure. The preventative maintenance approach, on the other hand, focuses on preventing the heavy equipment from further breakdowns. This approach has been deemed to be the best way of going about heavy equipment maintenance by experts. By opting for regular investigations and thorough check up, you can ensure the long-term well being of your heavy equipment.

The Benefits of Preventative Maintenance Measures for Heavy Equipment

The preventative mode of maintenance has been deemed to be the best approach when it comes to the maintenance of heavy equipment. Not only does it detect the flaws in heavy equipment but also saves construction companies a lot of money that would have otherwise gone in the damage control operations of the heavy equipment. The entire preventative maintenance scheme has a number of advantages to speak of.

  • Not only does the preventative maintenance approach prove to be friendly economically, but it also adds to the value of the heavy construction equipment quite drastically.
  • Preventative mode of maintenance also serves to increase the heavy equipment uptime along with acting as an inhibitor in their breakdown.
  • The preventative measures along with adding life to the heavy construction equipment also enhances utilization on the part of the workers.
  • By opting for the preventative maintenance measures, you can ensure the safety and security of those workers who are directly involved with the operation of heavy equipment. And then there is the fact that this measure also contributes a great deal to the quality of the work.
  • And last but not the least; breakdown of heavy equipment and repairing it involves a lot of paperwork. By opting for the preventative measures of maintenance for your heavy equipment, you will be able to witness a significant reduction in the paperwork.

The smooth operation of a construction site is directly proportional to the smooth working of the heavy construction equipment. And going for preventive maintenance measures is definitely one of the best ways to ensure that you have an equipment that is in perfect working condition.

Simple steps to operate a bulldozer

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Bulldozers are huge and very powerful construction equipment. It has a strong hold to the ground because of its tracks. These tracks enable the machine to keep moving on a very course terrain. Generally, it never gets stuck in muddy or sandy ground. This is because the large track of the bulldozer distributes the weight of the machine uniformly over a wide area. Blade and ripper are the primary tools of a bulldozer. It is mostly used for levelling the ground surfaces. Though it is a heavy machine, but you can drive it quite easily. If you want to learn the steps for operating a bulldozer, then just follow the simple steps which are mentioned below.

Tips to drive a bulldozer

  • Buy a bulldozer: – First of all, you have to buy a bulldozer. It is because, you cannot afford to practice on a bulldozer which is possessed by other people. If some damage happens then you have to pay to the person for its repairing. So, it’s better to get your own bulldozer. You can either buy a new bulldozer or go for a used one. It will help you to get a bulldozer and that too at an affordable cost. You should practice to operate a bulldozer in large open area to avoid any kind of accidents.
  • Board on your bulldozer: – Now, board on your bulldozer and have a sit on the seat of the driver. Just chill. Try to overcome your nervousness while you are focussing on driving. Do not start until you are relaxed.
  • Kick on the machine: – In order to start the engine of the bulldozer, turn the key which is there in the ignition. Place your foot on the brake, so that you can easily stop it in times of emergency.
  • Steer your bulldozer: – Grab the joystick and slowly thrust it to the direction you want to go. It will help you to have a control on the bulldozer’s movement.
  • Push the paddle of decelerator: – To reduce the speed of the bulldozer, you should push the paddle of the decelerator with your foot. In such an equipment, the paddle of the decelerator is always situated just beside the brake.
  • Manage the blade: – After pushing the paddle of the decelerator, now you have to get a control over the bulldozer’s blade. You can easily gain a control over that using the joystick. This joystick is placed at your right hand side. It is a heavy metal plate which shoves the mud and the sand to make the surface plain.
  • Level the surface of the ground: – The final step is to levelling the ground surface. For this, you have to slightly lower the blades so as to leave a very small gap between the ground and the blade. Now, control the pedal and the joystick to move the bulldozer to the forward slowly. The blade goes on shaving the ground as you continue to drive it to the forward direction.

 

You can also seek the help of an expert to sharpen your skill in this sphere. But don’t forget to try the steps in a plain land and not on a slope until you become expert in it.

Related articles across the web

Heavy construction equipment sales job needs

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

With the huge necessity of the heavy construction equipments in making a revolution on this earth, the sales industry for the heavy construction equipment has gone quite far. It has a very bright career with tremendous prospect. If you want to start your career in this industry, then this is the right time to do so as there has been a huge boom going on in the construction industry.

However, if you are a novice in this industry, then you must check with the demands of this job regarding the qualities. A salesman of the heavy construction equipment is quite different from any other field. It needs certain qualities that must be inherent and certain qualities that can be obtained only after a professional training in the heavy construction industry sales management course.

How can a course help you get a job?

There is no specific course that can provide you knowledge and a degree in the sales of the heavy construction equipment. However, in case you wish to have a successful career in this field, you have to have a professional degree in any of the business related fields. These can be any, management course that provides theoretical knowledge about how to improve the sales of a product. But, theoretical degrees are helpful only in the preliminary level, in order to reduce the competition of selection. But, the practical experience is much helpful in getting a sales job in this field. If you have had any sales related work experience in any small showrooms or dealers, then you can get a permanent job as a salesman in the prestigious heavy construction equipment manufacturing company.

What are the duties that a heavy construction equipment sales person has to perform?

It is the duty of the heavy construction equipment sales person to understand the product so that they can guide the buyers through the features and the qualities of the product. Understanding the needs of the buyer, whether they are in search for an agricultural equipment or heavy construction equipment, is the primary duty of the salesman. Not only this, but also making suggestions, providing them with all the varieties of options and that too as per the budget of the client are the duties of the salesman. The sales person may also perform the duty of receiving orders over the phone. Even the reports for any damage and the complaints must also be taken care of by the salesman of the heavy construction equipment.

If you can be a successful salesperson, then you can make a good fortune from this industry. It is a highly paid job when you can meet the needs of the clients and the customers. But, it is a job of high conviction and determination. Without dedicating yourself into the needs of this job, you will not be able to become a successful sales person in this industry.