Tag Archives: repair heavy equipment

Learn to repair heavy equipment and make a good career

We all need to have some kind of unique skills that can set up apart from the rest of the folks. It is just that it takes good deal of time to recognize that skill and by the time we realize it, it becomes too late for us to capitalize on it. However, the one who realizes his true potential can make wonders with his/her skill and can be innovative while applying the skill to various causes. Thus, the person can earn good money and also enjoy the work. Same stands with becoming a mechanic of heavy equipment. Heavy equipment is quite a complex subject and it takes years and years of study and practice to become a good mechanic. Once you have devoted all the time it takes you to reach the pinnacle, you can set examples for others. Apart from being a complex subject, heavy equipment are really expensive products and it takes a fortune for any construction company to buy an equipment.

As long as the machine is in good order, the owners of the machine are happy but once it starts developing any complications, they want a mechanic to fix the problem at the earliest. Here is where an expert mechanic can make things merrier for himself. Since he knows everything about the machine, just be the sound of the engine he may make out the issue and thereby apply things to get it fixed. If the machine gets up and running, the owner of the machine may give further machines to him or may spread his good work to other people thus increasing his business.

Join a reputed institute to learn about machines:-

To become an expert, it is important to learn thoroughly about heavy equipment. You can’t get all the knowledge by working under someone. To get complete knowledge about machines, joining a reputed institute is the best option. There they will teach you most of the things about heavy equipment. Once you complete the preliminary training, you may look forward for advanced courses and also seek some practical training. Institutes ideally send their students to various workshops from where they can see people working on machines. This is the place from where most of the students get to learn in depth and creates their fascination for the machine.

Keep yourself in the company of students who are serious in making this as their career:-

You tend to come across various kinds of people. Some will be very intense with what they are doing and some not that serious with studies. Try to be with people who take their studies bit seriously. That doesn’t mean that you don’t mix with the rest of the folks. It is just that you be with people who can help you make your career.

Get hired by companies:-

Once you are done with your studies and manage to get good scores, you may be picked up by some construction and heavy equipment company. Most of the institutes have campuses from where students are picked up for job.

Simple steps to repair your excavator

Excavators are important heavy equipment that are used to remove large amount of soil from the surface of the ground for construction purposes. Without it, many of the constructional works would stop. Therefore, its routine maintenance is very essential. You should do it to detect the problems. If you find some serious problem, go immediately for repairing it. Any kind of negligence in this case will lead to major damages. Many a times we have to kick on emergency repairs due to the sudden slip of the rubber/steel track or tearing of the wheel of the excavator. Don’t worry, you only have to follow some simple steps for its repairing and your excavator will be ready to go again.  Just have a look at the following article.

Steps to repair the excavator

  • First of all, it is very important to detect the device of track tension. After that, access your excavator’s plate. Every excavator has their own system of chassis which is situated in different time and place. This system depends completely on the type and model of the excavator.
  • The gap between the excavator and the ground surface should be 6 inches minimum. To lift the excavator, you have to use the hydraulic jacks. Don’t forget to keep the bucket and the crane against the ground. It will help the machine to be steady. Now, stabilize the whole excavator on the repairs and jacks before you start repairing.
  • The cover plate of the tension should be removed from the frame of the track. Against the zerk of the grease, the socket wrench should be placed. Try to remove it slowly. Allen wrench should be inserted in to the whole. Push inside the check ball. To lose the tension, press your feet against the rubber track retracting the idler wheel.
  • Using the metal links put the new track over the wheel sprocket of the drive. Now, skate the rubber track on the tension wheel with the help of the pry bar. To get on the metal links over the wheel, push the track’s bottom with your foot.
  • Put the grease zerk into the frame of track tension. With grease gun, push some grease into the zerk. If the frame of the track sag upto 3 inches, stop smearing grease.
  • Placing the engine on the idle, kick on the excavator. Try to rotate the track in all directions using the control lever. Check out the sag by turning off the engine. Go on rotating the track until the sag becomes at least 3 inches.
  • Don’t forget to secure the cover plate of the tension by stabilizing the track sags at 3 inches.
  • Detach the blocks by lowering the hydraulic jacks so that the excavator touches the surface of the ground.

Carefully go through all the following steps. It is not at all difficult. But, it requires little bit concentration and labor. So, go ahead and repair the excavator yourself and make it a new one.