Tag Archives: Heavy Equipment Welders

Heavy Equipment Welders

Fixing up heavy equipment is very critical especially when you are in middle of an important project. There have been numerous such instances when the heavy equipment has stopped functioning just because a particular part of it has gone faulty and it needs to be replaced. In situation like this, a person who knows how to cut the portion out of the machine and put the replaced part back on it plays a pivotal role. This can’t be done by any lay person. Not even an operator who works all his time inside the cabin can do this as long as he is not trained in it. Here comes the role of a welder.

The work of the welder is to cut the portion that has been identified as the problem, prepare the new part and then put it back by welding it and then eventually cleaning the stuff. These are basically the 3 steps that a welder does when he is working on heavy equipment. Other than that, there are also companies who buy used heavy equipment which are first dismantled and then installed with new parts. This work also requires welding skills and therefore the work of a welder is required by such companies.

Special training needed to become welders:-

As one require training to understand heavy equipment and operate it, in the similar fashion when one takes up the job to fix heavy equipment they have to undergo a special training on welding. The mechanics who work to fix machines are necessarily good welders but this does not mean that all mechanics know to weld. However, if you know to weld heavy equipment you have a brighter chance to become a good mechanic. Therefore, folks who aim to become good mechanics train themselves into welding machines.

Welders should know to cut things:-

Welders do not necessarily mean people who can join things but it also extends to cutting a part of a machine. Welders use oxy-fuel to cut metal. Some also use plasma for the same purpose. The most common form of cutting done is through oxy-fuel and it can be found in almost every service trucks. Plasma is however faster than oxy-fuel and can even cut an aluminum or stainless steel sheet which can’t be done using an oxy-fuel. This basic information should be known by the welders before they perform their task. Once they are done with the cutting work the next step is to sooth the rough edges so that the new part can be installed properly. Removing the rough edges can be a challenge to most welders as it is a piece of sharp work and they need to ensure that they have removed the slightest of remnants/cracks.

Huge demand in the construction industry:-

Heavy equipment welders in particular are in huge demand in the construction industry. They are usually offered high salary and someone who is experienced can demand more from the company. Package is perhaps not a constraint for the right candidate. It is just that the welder should know his work well and can complete the assigned work with precision.