Tag Archives: cat dozers

Caterpillar D8 Dozer

It has been witnessed that construction companies have found Dozers as a very good alternative of excavators to do low grade excavating. By grade excavating, it suggests digging not too deep inside the ground. It can’t just fully replace an excavator which has the potential to go deep inside the ground and pull all the dirt out. However, when one has his excavator occupied on some other project and is left with just a dozer, he can make full use of it. Other than that, a dozer is widely used for flattening the surface of the land which is its primary function.

A flat surface is very important before you take your work any further. You can’t ask your men to begin their work on rugged uneven piece of land. You first have to ensure that the land is flattened and brought to a level where others can find it convenient to walk with their tools or else there will be an alarming rate of accidents happening which will lead to working not read to work any further. In a situation like this, it is pretty imperative that you first make use of a dozer and roll it all over the ground to make it ready to walk. This also reminds of the fact about how intensively dozers are used to construct roads. You perhaps do not make use of any other heavy equipment other than dozers. Its heavy roll has the capability to flatten the hardest rock lying on the ground. CAT D8 is one such dozer that has made its reputation as the most incredible piece of machine made by Caterpillar.

It has been fitted with an unbelievable strong engine and has a net power of 120 hp with a displacement of 644.8 cu in. The total number of gears installed in this machine is 3 and the maximum forward and reverse speed that it can take is 8.4 mph and 9.6 mph respectively. The operating weight of the machine including the driver and the fuel tank is around 26,256 lbs. The total fuel capacity of the D8 dozer is 72 gallons. This is many times better than the several dozers made by CAT’s competitors. Moreover, the engineers while making this model have taken immense care to make the cabin as comfortable as it can be. They understand how important it is to make the operator feel comfortable and therefore have ensured that all the levers are set in a zone from where he can easily reach out to them.

CAT claims that it consumes less fuel and is highly productive. People who use CAT machines have also agreed to this claim and they say that they have been able to save good deal of money on fuel. They also expect CAT to manufacture more machines that work on these lines. The D8 dozer is easily available and can be bought directly from the manufacturer or by contact the dealer of your state. Other option is to buy them online. All seems to be quite convenient options.

New Caterpillar Bulldozers

Construction business owners invest a lot on heavy equipment and they are always in the look of technologically advanced machines that has the capacity of working for hours at length, consumes less fuel, emit less carbon and provide enough comfort to the operator so that at the end of the day they do not feel dead tired. Reliability is something that they are not ready to compromise a bit and if they find that the machine is not up to the mark, then very soon the demand diminishes for that machine incurring huge loss to the manufacturer. Keeping everything into due deliberation, Cat always comes up with products that matches consumer’s needs, wants and demands and in this process they turn out to be the undisputed leader in the heavy equipment manufacturing industry leaving every other company far behind.

Caterpillar is renowned for producing different types of equipment and is best known for producing dozers. We will be speaking in length about one of its new arrival and that is CAT D11T dozer.

Starting with the dimension of the machine, the total length of the machine with blade is 34.9 ft in and without blade it is 19.8 ft in, the width over the tracks is 11.8 ft in, the height to the top of the cab is 13.4 ft in and the length of the track on the ground is 12.7 ft in. Paying little attention on the specs, CAT D11T has a gross power of 935 hp and net power of 850 hp. The power measure is at 1800 rpm and the displacement is 1958.9 cu in. The total number of cylinders installed in the dozer is 12.

The total operating weight of the machine is 104590 kg with a fuel capacity of 425 gallon. The cooling system fluid capacity, the engine oil capacity, hydraulic fluid capacity and power-train fluid capacity is 63 gallon, 28 gallon, 64.2 gallon and 91 gallon respectively. The operating voltage is 24 V with alternator supplied amperage of 100amps.

Moving to the transmission of the machine, the total number of forward and reverse gears is 3 with a maximum forward speed of 7.3 mph and maximum reverse speed of 8.7 mph. The standard shoe size of the machine is 28 in. The total number of shoes on each side is 41 and the total number of track rollers on each side is 8. Moving the focus to the blade of the dozer, the width and height of the blade is 18.3 ft in and 109 in respectively. The capacity of the blade is 35.5 yd3 and the cutting depth is around 30.2 in.

It is fitted with hydraulic pump that is ideally gear driven and has a relief valve pressure of 3500 psi and the pump flow capacity is 66 gallon per minute. People who are intending to buy this machine should first go through its specifications and decide to buy it only if they find it suitable for their projects which it ideally is.

Caterpillar D11T Bulldozer

It is a must for a construction company to possess a bulldozer because it is considered to be the basic heavy equipment one should have if they are in this business. Not having a bulldozer will only suggest that the company is not sound or is probably not so keen in conducting its business implausibly which will only deter the projects giver to give any businesses to the company and may move to some other construction company. It has been noted that people are ideally brand oriented when it comes to buying heavy equipment. It is quite seldom to find a person who is not so brand conscious and is ready to buy heavy equipment of any brand or else most of the guys prefer to buy machines of a particular brand and will stick to it.

Knowing this fact, the respective brands also need to work hard to keep up to the demands of their customers compelling them to think out of the box and keeping into consideration the wants of the customers they keep bringing in various innovative models with varied features. One brand that has set itself different from the rest is Caterpillar and being the pioneer in manufacturing bulldozers, they take pride in introducing dozers of high quality and reliability.

Caterpillar’s D11T bulldozer is quite an innovative machine manufactured by the esteemed brand with its specs mentioned below.

When we talk about bulldozers, we invariably mean power. The gross power of this machine is 935 hp. and the net power is 850 hp. with the power measured at 1800 rpm. It has a displacement of 32.1 liters and its aspiration is turbocharged. The total number of cylinders it has is 12. The operating weight of the machine is 104590 kg with a fuel capacity of 425.1 gallons. The cooling system fluid capacity and engine oil capacity is 63.1 gallons. The hydraulic fluid capacity and power train fluid capacity is 64.2 gallons and 91 gallons respectively. The operating voltage of the machine is 24 V and the alternator supplied amperage is 100 amps.

The total number of forward and reverse gears is 3. The maximum forward and reverse speed is 7.3 miles per hour and 8.7 miles per hour respectively. The ground pressure of D11T dozer is 20 psi with the contact area of 9781 in2. The standard show size of the machine is 28 in and the total number of shoe each side is 41 and the total number of rollers on each side is 8. The track pitch is 12.5 in and the track gauge is 9.5 ft in. The total pump flow capacity is 66 gallons per minute and the relief valve pressure is 3500 psi.

If we check the dimension of the machine, the length of the machine with and without blade is 34.9 ft. in and 19.8 ft. in respectively. The height of the machine to the top of the cab is 13.4 ft. in and the length of the track on the ground is 12.7 ft. in. It is overall an ideal dozer for anybody to have.