Are you just about to make a foray into the construction industry? If yes, then the very first thing that you will probably want to do is getting to know about the various heavy construction equipment that from now on are going to be your companion for a major part of your day. And among the many heavy equipment that rule the construction fore, nothing is perhaps as significant as the dozer.
Dozer- An Essential Part of the Construction Industry
Perhaps the very first thing that you would want to know is what is a dozer all about? Short for a bulldozer, the dozer is perhaps the most commonplace earth moving equipment that is there on the block. Primarily consisting of a secure coop for the drivers, tracked chassis, a ripper claw at the back end and a number of front mounted blades, that the dozer makes use of in order to push the soil ahead.
Operating a Dozer- Getting To Know the Basics
Now comes in the next question- how are dozers operated? Well, the very first thing that one needs to understand in this context is that operating a dozer is quite complicated and should be entrusted to people who are well trained in this aspect. However, it is best to be aware of the basics before setting foot in the arena.
- A majority of the controls are devised in such a manner so that they are able to operate the tractor; only one of the controls is devised to control the blade.
- The operator would do well to be ready to bring the dozer to a halt any time after turning on the ignition.
- You will have to make use of the joystick, usually on the left in order to make the bulldozer move in the direction that you want. You will also find a joystick to your left, primarily meant for controlling the blade.
- The operator needs to lower the blade till it touches the ground, following which the joystick has to be operated in a manner so as to scoop
- The joystick has to be manoeuvred in such a manner so that the blade is lowered and it touches the ground. The controls will then have to be moved in such a manner so that it successfully scoops a certain portion of the earth and leaves a flattened surface behind.
- If the operator is new in the field and has just started off, it would be better if they do not run the dozer on a slope or a steep area. It would also do well to work on a piece of land that is not as important so that the operator can get used to the mechanisms of the dozer.
If you are in charge of the construction site, it is your responsibility to ensure that the operator hired by you is well up to the mark as operating a dozer is a tad bit complex job. However, there is nothing that cannot be simplified with the right kind of approach and training.