Category Archives: Wheel Loader

How to operate a loader

Loaders are one of the most essential and important heavy construction equipment that the construction workers simply cannot do without, in the current construction scenario. However, operating the loader, or in fact any other heavy construction equipment, is not an easy task. You need to make sure that you know the steps properly, so that the loader doesn’t tip over or change directions all of a sudden.

Start with choosing the right size and power of the loader. There are different kinds of the loaders. You can choose a skid loader or a wheel loader or the other kinds of loaders, as per your requirement. Once you have done so, you need to follow these steps.

  • Read the user manual:

 

The first step is to read the user manual of the loader carefully. There you will be guided about the different switches, levers and other tools. Take your seat and carefully identify the switches. Before you start, you must fasten your seat belt properly, so that you do not fall from the loader.

  • Understand the controls:

 

There are two steering handles in almost all the loaders. They are located on the sides of the arm rest of both sides of the loader. There is also a diagram for the buttons that clearly state how the loader runs and before you start the machine, you need to look at the loader carefully.

  • Start the loader:

 

To start the loader, usually you are given a key that is almost similar to that of a car. Some loaders are also started by a clearly visible start button. Nowadays, the newer loaders come with a keypad, where you will have to enter the starting code and the machine will start.

  • Unlock the controls:

 

Usually the control system is locked and hence, as you start the machine or loader, you need to unlock the control system. A toggle switch does the job and when it is turned off, a red lamp is ignited and when it is switched on, it turns green.

  • Moving the bucket:

 

Usually the bucket is controlled by the left steering handle. It must be made assured that the joystick is moved only to the right or left side or to the front and back. Diagonal movement may cause the machine to act differently; rather than moving the bucket. Many loaders use pedals to run the machine and control the buckets. While moving the vehicle, you must always lift the bucket high enough to see the front clearly.

  • Controlling the right handle:

 

The right handle controls how the bucket is operated to load and unload the debris. Moving the right handle to the left will raise the bucket and moving it to the right will unload or dump the material in the bucket.

Now that you have understood how the loaders can be operated, it is a must that you stop the loader right in front of the pile of material that you want to load or unload. Once you are done, park the machine properly, so that it doesn’t obstruct the area. Always move the vehicle in slow speed.

Buy Now on eBay

[ebayfeedsforwordpress feed=”” items=”3″]

Expect good rental income from a wheel loader

Moving stockpiles within the construction site can be very arduous when you put people to do the work. Also, you can’t make use of big heavy equipment to just move stuffs from one place to another within the jobsite. You need something that can take care of this business and does not cost you more for it. This is when a wheel loader comes into picture and does the work for you. A wheel loader has a big bucket in the front which is used to carry the mud by dragging the bucket on the ground, fill it with the dirt and then dump it on the truck. The size of the bucket varies a lot and it starts from 1 cubic yard for smaller types of loaders to 20 cubic yard for the larger models. The bigger ones are particularly used for mining applications.

You will find a number of wheel loaders on a mining jobsite. Also they will all be big in size and not that are owned by small contractors. This also suggests that there is a wider market for selling or renting wheel loaders to such enterprises. Now if we talk about renting wheel loaders to big mining houses, you will generally see good money coming out of the deal. As long as the wheel loader is in good working condition, the mining companies are ready to pay the price you quote. They only check the quality of the machine and if they find that to be in order, they are ready to pay for its value.

This also leaves us with the question that do big mining companies take wheel loaders on rent? Well, as a matter of fact, they take most of the heavy equipment on rent. They hardly have anything that actually belongs to them. The reason they do this is every different project requires different kind of heavy equipment and they can’t afford to spend everything they have on buying machines. This is why they prefer to take equipment on rent and return it once the work is done. At times, they sub-contract the work to different contractors who are given specific responsibilities. So a contractor who is supposed to take care of one part of the job will not look into any other departments. These contractors predominantly take loaders on rent.

You can take help of any heavy equipment rental company who can crack the deal for you. These rental companies are in close nexus with different contractors and construction companies. They may know who needs what and accordingly they will create a platform where both the parties can meet each other and complete the transaction. They will charge you some fees for their service but it is really worthy. They will also take care of the agreement part and will ensure that nothing goes haywire. Conducting a smooth and fair deal is part of their responsibility. However, doing a bit of research on the rental companies always helps. It is better to be prepared from your end.

Buy Now on eBay [ebayfeedsforwordpress feed=”” items=”2″]

Renting a wheel loader

When we talk about construction business, we need to give priority to every kind of earth moving equipment. Each machine is designed and built for a specific purpose and therefore as long as you do not have that set of heavy equipment with you, there are high chances that you may not get the desired results or the results that you have achieved is not to the point and may not be satisfactory to the client. So for instance, you are the contractor and you are assigned some task for which you do not have the right heavy equipment. You may end up doing a shabby piece of work which is most likely will not be appreciated by your client. Getting any more business from the same client can’t be expected and your bad reputation will follow you everywhere you go. So it makes more sense to use the heavy equipment that will give you the best result.

All sounds to be good when we talk about procuring the right set of machines but the real challenge is to buy one. It may turn out to be a very expensive affair to purchase an earth moving machine which is why many people just give up their dreams of establishing their construction company. Well, when you have alternatives in hand why not use them as well.

We are focusing on the topic of how convenient it will be for a contractor or for that matter any small construction company to rent a wheel loader if buying one is proving to be an expensive affair. A wheel loader is very useful heavy equipment and can be seen in almost every big construction site. It has the capability to pull huge pile of dirt and dump it in the dumpsite. In a construction site, you will come across debris that needs to be taken care of and you will not find any other heavy equipment apart from a wheel loader that has the potential to do the work in a better way. So for contractors who work in a phased manner, renting a wheel loader is perhaps the most suitable option.

Renting heavy equipment is never a problem. All they need to do is find the right machine and their work is done. However following the right channels are important. So once you have identified a wheel loader you need to test its capability and its strength. Checking if the machine is in good stage is important or else you will pick up something that has become a pain for the operator. So when you go to meet the owner to test the machine, make sure that you take along the operator with you so that he can test it and only if he gives his nod that you should proceed with the transaction.

Check if the owner is ready for negotiation with the rental amount. In case, you find it apt with the current market price and you feel it irrelevant to negotiate you may simply take the loader or else must try to bring the price down.

Top 10 Models of Wheel Loader

Wheel loader is an excellent tractor which finds its application for construction and building purposes. They have different shapes and sizes to suit the needs of the user. Here are top 10 models of wheel loader.

521F-The CASE 521F is provided with 4-tier technology engine that combines comfort, adaptability, and superior service. It is extremely beneficial to the operator for being fuel efficient and fast speed. The service costs are also low due to simple SCR design which makes it easy to maintain.

1221F-This is the perfect model which can move large quantities of materials. It combines power, control and productivity. It is a powerful heavy equipment which has tier 4 technology of engine installed in it which makes its operators to use for longer duration and consume minimum fuel. It also has power shift transmissions which permits the operator to set the shift transmission according to the needs for a particular application.

990K-This model of wheel loader has proven unique features and finds its application as one of the finest tool for loading. This version has Tier 2 EPA technology and is powered by ACERT technology which makes it very productive by consuming less fuel. The speed of the engine is lesser which helps in saving fuel.

HL760-9-It is very fuel-efficient heavy equipment. This model of wheel loader has three forms such as Power, Standard and Econo. One unique feature of this model is that it has an advanced color visual display with 5.7 inch LCD for the user to operate the machine easily by reducing the glare.

JCB 411-This 411JCB model is equipped with tier 4i technology of engines which makes it fuel-efficient. It also has operator cabs that are large in size and it also has a remote monitoring system. The JCB live link technology enables engine information to be accessed from distance.

JCB 416-It also 4i tier technology engine which helps in reducing fuel costs. It is very economical and does not require diesel oxidation, expensive diesel filter. Its speed is regulated by a viscous engine fan situated in the machine.

ZW 180–5-It is designed to give top class productivity and comfort to the users. The machine has a relaxing cab which is user friendly and can be controlled easily. The features of the machine make it easy to maintain. It is safe and sustainable and does not have harmful discharge complying with the EU rules of emission standards.

L330C-It is a good model which is extremely fuel efficient and comfortable to the operators. It is equipped with an alternator and a water pump.

L30B-This is top model of wheel loader which has innovative design, immense driving comfort and versatility. It has an electronic service which makes it to maintain easily.

L35B-It is an excellent model of wheel loader which has great power and stability owing to the computer aided design. It is long lasting and can be moved easily. It also comprises a comfortable cab and slender doorposts for all-round visibility.

 

Few Important Things One Must Know Before They Start Operating A Wheel Loader

A Wheel Loader is considered to be one of the most important heavy equipment in the construction sector and the operators working on them are paid real well for their services. But this does not imply that operating a wheel loader is a difficult thing to understand and one has to go for enormous training before they master their work. It may not be a cake walk for a newbie to understand everything about the operation part of the equipment but once he starts working on it, he will certainly understand that it is not as difficult as he had perceived it to be. Moreover, there are many institutes that give you formal training on working as an operator. They mold you so well that by the time you are out of the institute, you have learned most of the things about the machine. Rest depends on how hard you work on field and how much effort you give to know the functions aligned with various models of wheel loader.

We would be having a brief discussion on what are the different things one need to know to operate a wheel loader.

Get through a good institution:-  You learn well if you have good teachers to teach you. That is why it is important that you get yourself enrolled to a good institution where you are given both theoretical as well as practical knowledge of different machines. Once you clean the initial stages, you can go for specialization where you can select wheel loader as your prime subject. You’d then be given intensive training on that particular equipment and will have every chance to excel in your career. So take a start by joining the best institution in your city.

Knowing the kind of project:-  Wheel loaders come in different weights and sizes. It is interrelated to the sort of project you would be using the machine. For small work, you can make use of equipments which are compact and less heavy. However, if you are given to work on big projects, then you have a good opportunity to try your hands on the wheel loaders we generally see around various construction sites. You just can’t use a compact wheel loader in a huge site as it may not be of much use to you.

How well do you know your machine?  Getting through from a good institution does not necessarily make you a good operator. What makes you a good operator is how well you know your machine. An operator is considered to be the heart and brain of the machine. There should be a connection between you and your machine and it should be so intense that a single glitch somewhere down in the equipment should give you signals that something is wrong with it and you need to get that fixed. You may come around many operators who have been working with a loader for years, has the capability to understand there’s a glitch before anybody else can vaguely figure it out.

Caterpillar Inc. is about to bring their latest discovery, the M series of wheel loader to the market by 2014

Caterpillar Inc. is going to launch its most awaited wheel loader in the next year. This wheel loader from its latest “M series”, which as an extended and updated model of the “XE series”, contains all the features of the XE models, as well as many additional ones. The features that will be additional in the M model are: an increased and spacious size of the cab section, a modified and improved 12-ton 982M engine capacity, and all the other features of the 962, 950, 966, 980 and 972 models of wheel loaders.

As the company has understood the immense need for the equipment in any construction industry, there has been a tremendous trial for developing and increasing the qualities and features of all its wheel loaders. The company had started producing the wheel loaders as the G series, with a Tier 1 working principle. Since then, the Caterpillar Inc. has moved on to making its fifth generation machine, the M series wheel loaders. Before the M series came into the news or in front of the world, there was the K series of wheel loaders which was the most common among the users. As per the cost of the wheel loader, the fuel efficiency of the equipment was 25%. The company claims that this time, in the M series of the equipment, it has increased fuel efficiency.  The split flow oil system and the use of multi viscosity oil has made this fuel efficiency possible. What makes this new series of wheel loaders different from the rest of the wheel loaders is that it has a standard lock-up clutch torque converter. This matches the engine power and the hydraulic system of the equipment as designed by the company

By the beginning of the year 2014, the Caterpillar Inc. will offer the users with their first set of heavy equipment designed as the models 966M and the model 972M. However, during the middle of the next year, the company will have to meet the expectations of the users by providing the other two models namely the 980M and 982M. But the highlight or the most talked about models of the M series wheel loaders from the house of the Caterpillar Inc., will be available in the market by the end of the year 2014.

Caterpillar Inc. always comes up with innovative ideas and they keep renovating and modifying their equipment. The M series wheel loaders that the company is about to launch very soon is the Tier 4 or the latest engines from the house of the company. The most amazing feature that these engines have is that they are run by the Cat Regeneration System, a system that Caterpillar Inc. claims to allow those engines which have a horsepower of 175 and can be sold in the countries that are without any modification and are considered as lower regulated.

Reduce Expenses and Earn Profit- Rent Wheel Loaders for Construction

The smooth operation of heavy equipment largely depends on the use of heavy equipment. If you are into the field of the construction, you definitely cannot ignore the importance of these equipment for the fulfilment of the construction job. Among the many types of heavy equipment that are required on the site, the wheel loader perhaps forms an indispensable part.
What Is A Wheel Loader?
Putting it simply, a wheel loader is just another of the heavy construction equipment that is used in the construction industry for the purpose of moving heavy materials such as asphalt, dirt, snow, debris, feed, gravel and the like. As the name suggests, the wheel loader is used in the construction arena in order to load and move things from place to another without pushing it. They usually come attached with a bucket at the front.
Renting Wheel Loaders
Wheel loaders, no doubt form an important part of any construction business, but it is also a stated fact that these equipment are expensive. For small enterprises who are struggling to gain a foothold in the industry, investing such large sums of money on wheel loaders is not a very viable option. In such a scenario, renting wheel loaders seems to be the most effective alternative as not only does it serve your purpose, but also cuts cost quite effectively. And when you have to invest less, then it is obvious that your profit margin is sure to expand considerably. Moreover, when you have to deal with projects that are for comparatively shorter periods of time, renting a wheel loader instead of buying it seems like a more prudent alternative.
Check Before You Seal the Deal
There are lot of rental organizations on the block from where you can rent wheel loader. However, you need to keep certain things in mind before you seal the deal.
• First and foremost, make sure that the rental company picked by you is reliable and has a good name in the market. This ensures that the heavy equipment that you are renting is of the best quality. And we all understand the importance of quality when it comes to heavy equipment.
• Make sure that the wheel loader that you are renting is good enough to serve your purpose. Make sure that the controls are in perfect order and can be easily operated as is usually with wheel loaders. Also ensure that the engine of the wheel loader is on perfect order as it is of paramount importance to the smooth functioning of the loader.
• Before fixing on a particular rental agency, be sure to check out other alternatives available on the block. This will ensure that you find the best wheel loader available for rent. Additionally, looking for second opinion ensures that you do not miss out any lucrative offers.
It is, therefore very clear that wheel loaders have acquired quite an important place as far as the construction arena is concerned and renting the equipment instead of buying it certainly contributes to the effective cutting down of expenses.

 

 

What Heavy Equipments Are Needed For Road Construction

Construction of roads is an ardent task for both the government and the one who has taken the job. Companies given the job to construct roads need to have all sorts of heavy equipments available with them as heavy equipment has its own significance in road construction and without them it’s pretty unimaginable to even move a stone from one place to the other. We need a bulldozer to level the land or an excavator to excavate the land, remove the waste mud from the place and then level the land. Then we may also require a loader to take off the snow from the land or if it used to construct a road in mid of a forest, then it can be used to carry the logs and ferry it from once place to the other. Therefore, each machine has its own significance in this purpose and the absence of any of the machine can severely impact the entire project.

The construction company needs to have a thorough knowledge on how things work in this domain. Any previous experience in constructing roads will always work as an added advantage to them. We would be discussing in brief about the role than heavy equipments play towards the construction of roads in US.

Hydraulic excavators:-  These are used to excavate earth and remove the unwanted mud from the face of the earth and dump it in a truck. It’s not only used to excavate earth but also used to remove huge blocks of stone, logs lying on the ground and things which are unwanted and needs to be dumped. With the help of the shovel, it takes up the stuff from the earth and put it in the truck which then ferries them in the dump yard.

Bulldozers:-  Bulldozers are ideally used to level the land. They have those heavy rollers in their front which is used to crush every particle that’s in its way and mixes it with the layer of the earth. Bulldozers are seen in many road construction sites rolling the tar on the road and make the surface smooth as ever.

Loaders:-  This is another important heavy equipment which is widely used during construction of roads. Especially places which have the surface covered with snow, the loaders are extensively used to load the snow in the bucket and ferry it to the truck. Many construction companies are using hydraulic loaders which give them high power, more efficiency and low fuel consumption.

Articulated trucks:-  When we talk about construction of roads, articulated trucks plays a significant role in getting the work done quickly. The heavy equipments take off the unwanted materials. However, that is loaded on the truck which eventually ferries the stuff to the dump yard or which is on the same job site. Without these trucks, life would have been very difficult for the construction companies and thus considered as important equipment.

Companies that manufacture heavy equipments are Caterpillar, John Deere, Hitachi, Volvo etc. Roads bridge the gap between 2 cities and are very imperative as far as the growth of the nation is considered.

Wheel Loaders – Facts You Must Know Before Moving Into the Construction Segment

There are some heavy equipment without which it is unimaginable to run the construction business smoothly and out of those machines, perhaps the most important one which no construction company would like to do away are the Wheel Loaders. Construction and mining experts believe that these industries can’t move an inch without the utility of these machines and hence they form an important part as far as both the segments are concerned. The utility part is most likely a debatable one. However, leaving this aside, we can definitely see a lot of importance of this equipment in the present scenario.
Let us first understand what exactly a wheel loader is and its importance in the construction industry. Wheel Loaders are ideally heavy equipments which have a loader or a bucket in the front and are driven by a tractor. It is used for many reasons like clear up the pavements, or to carry materials like asphalt, mud, demolition debris, snow etc. It is found to be highly significant while clearing the snow from the roads. Especially when there are huge blocks of snow mounted on the road, it is nearly impossible to get that cleared manually. You need a heavy equipment to that moved off and you don’t have a better alternative than putting wheel loader to some use.
That was about snow. If we talk about paving a way in the forest, once the trees are chopped down, you need machines like these to take off the logs and ferry it to some other place. A wheel loader has been proven to be highly successful in getting such work done in a smooth manner.
Wheel loaders are ideally driven on wheels but at times, it has also been moved on tracks, thus displaying its compatibility on wheels as well as on the tracks. It has also shown its metal in the mining industry where it is used to pick up stockpiled stuffs and dump it in the truck. You will come across a lot of stuffs in a mining site that are heavy and are simply lying idle. For instance, piles of rocks, coal, demolition debris etc lie to be ferried by the loaders. The loader fills the materials in the bucket and dumps it in the truck.
The wheel loader can be used for multiple purposes if the attachments can be replaced with something else suited for the desired job. Therefore, there are two different kinds of loaders. The first kind has the bucket permanently fixed with the tractor and the other where the loader can be replaced by some other attachment. This makes the machine user friendly and experts have this one in their recommendation list.
Almost all the major heavy equipments manufacturing companies produces wheel loaders as they get enough orders from big construction and mining houses. To name a few companies like Caterpillar, John Deere, Kawasaki, Volvo etc produce large loaders. Whereas companies like JCB are known for producing quality backhoe loaders. The wheel loaders might be a bit expensive one but it’s worth every dollar you pay.

Want To Take A Wheel Loader On Rent – Read This One

When you have just started a construction company, nothing can please more than getting big projects where you see the margin of profit to be much higher. Getting human resources may not be a big issue however; the challenge that you may experience is in getting heavy equipment. Especially for a beginner who manages to set up his own company with limited amount of funds may not be in a position to buy heavy equipment to fulfil his business requirements. In such a scenario, the best available alternative for him would be to take them on rent and once the project is over, give it back to the owner. In this way, he can complete the project without having to invest a fortune and still manages to successfully complete the job.

Before one approaches the lessor to take the machine on rent, it is quite imperative to understand the time you need it on rent. The longer the machine is with you, the less money would be taken as rent. However, this is not a thumb rule with most of the people. Lessors lease their machines on their own whims and fancies and negotiating its price plays a pivotal role in bringing down the rent amount.

Well, we would be discussing about how a person can begin his search to take a wheel loader on rent.

Make use of internet:-  Internet has plays an instrumental role in getting people closer to each other which has also resulted in many online businesses. In this same fashion, people have started with online purchase and selling of goods. Right from apparels to heavy equipments, you can find all here in this virtual world. Now as far as taking a wheel loader on rent is concerned, one needs to search for people willing to rent a wheel loader in their city. Then they need to check the equipments people have. A wheel loader is pretty expensive equipment so you can’t expect the rent to be low. Moreover, if they are leasing new equipment, the rent would be high as well. However, you get the option to search for both new as well as old equipments and according to your budget can locate a loader which would suffice to play its role in the project in hand.

You should check the specification, features and utilities of the loader and check if you can use it for multi-purpose activities. The loader is retractable and can be fitted with any other stuff to make it multi-purpose equipment. However, not all loaders can be removed and this is what you need to check from its owner.

Check out the classifieds:-  Taking a good look in the classified section of a local newspaper can help you get a better deal. They are often loaded with advertisements from people who want their stuff to be put on rent. You can get in touch with them and see if the loader they have is something you want for your business. If you’re convinced, you go for the deal.

CLICK THE LOGO: 

Heavy Equipment for rent and sale

Heavy Equipment for rent and sale