Category Archives: Line boring

Line boring heavy equipment

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Drilling a hole to lay a foundation is quite an intrinsic part in the construction sector and the holes dug for the foundation has to be precise as designed by the civil engineer. You can’t mess up with such an important stuff because if you do then it directly affects the quality of the construction. It is therefore crucial to select the right type of heavy equipment and also the right kind of cutting tool. The cutting tool needs to be attached to the heavy equipment and then begin the process to bore the ground. Now the cutting tool can be a single point or can have multiple heads. Each type of tool is used for different kind of boring. As no 2 boring is the same, you can’t use the same cutting tool for every type of boring. While fitting the boring bar one must ensure that both the ends are firmly supported and it works only in case of a through hole.

The challenge that people encounter while boring is that there are immense chances of the boring bar to get disconnected from the machine. Though both the ends of the heavy equipment has caught the bar firmly there are still lot of chances of it coming out during the process of boring. This is the reason why it is considered to be more challenging than turning. Other than this the clearance angle requirement has been increased which has made things more difficult for the operator. It actually limits the kind of support that should be given to the cutting edge and makes it more vulnerable. You can use a line boring tool in almost all kind of heavy equipment. Be it a dozer or an excavator or a backhoe loader, it goes with all kinds of heavy equipments.

Operators who are working with line boring need to be highly expertise in their respective domain. Since the holding capacity of the heavy equipment is not that great it can pose good deal of problems to inspect the work already done which includes understanding the size of the hole and the surface roughness. Therefore the need of expert operators arises. The operators need to know his matters well. Apart from laying foundation which is one of its core work area, line boring it extensively used for many other purposes and this is why the guy needs to be really sharp with his skills.

With the advent of portable boring, life has become a bit simpler for people who take boring contracts at far-fetched places. They do not have to load the boring bar in a truck or a big vehicle. All they can do is put it in back of their car and port it to the next destination. The reviews of portable line boring tool have been awesome. It is just that the hole need timely repairs. Line boring cutting tool can be bought directly from a dealer or online. Do some research on the pricing before you go to buy one.

Have questions on line boring heavy equipment

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Questions pertaining to heavy equipment are quite evident in the construction sector. The person operating the machine may come across a number of issues and that becomes his questions. He needs answers to them in order to resolve the problem. At times he experience some sort of challenge in working in a situation that he has never worked before and he probably does not know how to go ahead with it. This also acts as an obstacle and he wants someone to address that issue or give him some kind of solution so that he can overcome the issue and get up and running. Line boring work is a very different kind of work but it will not be proper to call it at all difficult. Just because it is little different than the rest of heavy equipment people find it to be difficult and have questions on how to get the line boring heavy equipment to work. All you need in this case is a bit of patience to know the new stuff and perhaps some amount of concentration.

Ideally when a person who worked on heavy equipment doing things other than line boring will not have the knowledge on the subject and therefore the first thing will be to acquire some knowledge on how the pivots work and work together with other pivots on the heavy equipment. One should also learn to set up the bars level parallel to other pivots. Now this is something that you will only learn with time. You also need bit of experience and you will steadily see your skill getting honed. Remember the first time you started learning about heavy equipment you found that to be way too difficult and many also had thoughts of giving up the learning and do something else. So when you deal with something new you are bound to have questions and you got to seek for the answers.

While working on line boring heavy equipment you should fair deal of idea on how to measure a bearing or pin and from that assume the size the bore should be. These all are pretty basic and will not take a long time for you to learn but definitely the initial phase will not be rosy at all. You got to struggle a bit and will also have questions. What you can do is put forth the questions that you can’t derive an answer to someone who is pretty experienced in the stream and take his opinion on the matter. Experienced people can get you workarounds that you can’t even think of that being a possibility. It may amaze you for sure and will also be quite a handy thing for you.

Other than that you can place your questions on a blog for the experts to answer them. These days there are so many people who have turned on to the virtual world to get answers for their questions. You can also depend on it a bit and will find it to be really helpful.