Category Archives: Grease Guns

Ensure That Your Construction Equipment Is Working Fine With the Heavy Equipment Grease Guns

One could easily equate working in the construction industry with the active use of heavy equipment. If you are an active on site construction worker, then you will find it hard not to work with construction equipment. Keeping this aspect in mind, one could easily decipher the importance that the smooth operation of the heavy equipment holds on the area.  This can only be possible only be possible when the equipment are maintained properly.

What Are Heavy Equipment Grease Guns?

Since the successful completion of a construction project largely depends on the smooth operation of heavy equipment, the importance that the maintenance of these equipment holds in the entire deal is quite evident. There are a number of devices on the block that are used for the maintenance of heavy equipment. One of them is the heavy equipment grease gun.

Generally speaking, a grease gun can be defined as a tool commonplace in workshops and garages, mainly used for the purpose of lubrication. In the construction industry, this device is used to apply grease or lubricant to certain parts of the heavy equipment when they are unable to operate smoothly due to increasing friction. A typical heavy equipment grease gun is used to administer lubricant by means of an aperture to a specific area, generally termed as the nipple or grease fitting. The aperture of the grease gun is designed in a manner so as to fit perfectly with the aperture of the mechanical apparatus to be lubricated. This ensures the application of the lubricant only where it is absolutely required.

Why Is Your Grease Gun Not Working?

The heavy equipment grease gun holds quite an important position as far as the smooth operation of the heavy equipment is concerned. And it certainly would not do if the grease gun that you are using does not operate properly.

  • Heavy equipment grease guns are likely to stop functioning if they get clogged over time with the accumulation of debris and the hardening of the lubricant over time. Getting rid of these impurities with the help of a pointed tool such as screwdriver or a pin has been found to be a great solution in such a situation.
  • The heavy equipment grease gun may also stop operating owing to dysfunctional or dead batteries. Recharging the batteries after detaching them from the device can solve this problem for you and get things going again quite smoothly.
  • If the heavy equipment grease gun used by you is a pneumatic one, then air leakage or blockage might pose a problem in the smooth operation of the device. There are seals on such grease guns that need protection from cracks, rots or decrease in air pressure.
  • Heavy equipment grease guns might also stop operating if it runs out of lubricant. You need to refill the grease gun in such a situation to make it work again.

Heavy equipment grease guns have been found to be the most useful device when it comes to lubrication of certain pars of the heavy equipment for optimal functioning.

Increase the Life of Your Heavy Equipment- Go for Oil Analysis

That the use of heavy equipment is mandatory for the success of a construction project is a fact that cannot be denied in any way. Being in charge of the construction industry almost always equals to dealing with heavy construction equipment. And dealing with heavy construction equipment comes hand in hand with maintenance and safety issues which cannot be overlooked. Oil analysis has been found to be one of the many ways in which could proceed towards this goal.

What Is Oil Analysis All About?

So, the very first thing that must come to your mind is what is oil analysis all about? Broadly speaking, oil analysis refers to the test conducted on the properties of a lubricant in a laboratory. A part of preventive maintenance measures, oil analysis has been proved to be helpful in a number of ways. The entire process is carried out in three different stages, viz, analysis of the various properties of the oil, analysis of the contaminants and analysis of the debris from the equipment accumulating out of wear and tear.

Oil Analysis and the Heavy Equipment

The entire oil analysis procedure has been found to be quite useful for maintenance of heavy equipment. One cannot deny the fact that maintenance plays a key role in determining how long particular heavy equipment will survive. And oil analysis helps construction site owners do exactly that. It helps them in determining what is best for their heavy equipment thus, increasing its longevity.

Machine Conditioning Monitoring has emerged as one of the latest trends in the entire heavy equipment maintenance affair. Based on oil analysis, this system, though not compulsory, has been found to hold a significant position nonetheless. Heavy equipment go through a lot in the entire construction business. It is the heavy equipment that are exposed to extreme working conditions, going through all the rough patches in order to complete a construction project on time. In such a situation, oil analysis can emerge as a significant contributor to the entire maintenance procedure of the equipment and increase its longevity.

An effective oil analysis can prove to be of great help in not only determining the assets of the construction equipment, but also prove to be significant in putting a leash on abrupt failures, increasing both productivity and longevity. Oil analysis takes aspects, such as, viscosity, water, fuel dilution, soot, wear metals and the like into account for its purpose. This is important, as it is this procedure that will help determine the next step that is to be taken in the entire maintenance procedure.

It therefore, would not be wrong to conclude that the oil analysis does prove to be an important factor in the entire maintenance procedure of heavy equipment. Not only does it ensure the optimal utilisation of the equipment but also adds to the entire longevity factor of the equipment.