Category Archives: Bulldozer

Bulldozer Maintenance

Proper maintenance of heavy equipment is considered to be highly important when it comes to increasing its overall lifespan. Big construction companies at times find it difficult to keep a check on the last time the machine was serviced. They depend more on the operators for this work. They feel that since the operator manages the machine for most of the time during the day, he is well known of the machine’s needs and therefore accordingly that can be met as and when it is requested.

This means that the entire onus of maintaining the heavy equipment falls on the shoulder of the poor chap who operates the machine all throughout the day and is also expected to know the date the machine was last serviced. The operator usually tends to forget the date is pretty obvious for so many reasons and carries on working with it till he realizes that it has been too long that the machine has been sent for maintenance. By that time there are chances that the equipment must have developed minor complications and if not addressed then can turn into a severe issue?

A good mechanic is the crux:-

You will find many mechanics who claim to be a champion when it comes to repairs and maintenance of heavy equipment. But that is certainly not the real picture. Many such mechanics take preliminary training in some heavy equipment school and then work as an apprentice for a year or so post which they start up their own workshop. They sincerely do not know much about machine and are learning while they are working. You got to give your machine to someone who knows the in and out of it and knows what to do under a given problem. A bulldozer is a strong machine but it still requires maintenance. It goes through a lot of dirt all throughout the day and most of the time has to work on extreme weather. This severely impacts the longevity of the bulldozer. It is therefore crucial that the machine is given to an experienced mechanic who has been repairing bulldozers since many years.

Maintenance of bulldozer should be monthly:-

Since people tend to lose the count of days when the last time they serviced their bulldozer, it is advised that they give their machine to be serviced on the first day of the month. Many workshops are open on Sundays as well so all you have to do is take the equipment to them and ask them to service it on the same day. Washing the machine, oiling, greasing changing the engine oil are stuffs that should be done. Other than that, if the operator experience some problem with the bulldozer that should be informed to the mechanic so that he can take a test drive and after understanding the issue work to fix it.

One must always remember that when they are dealing with a bulldozer, they are actually dealing with an expensive heavy equipment and no way should they take anything for granted especially not the maintenance part.

Renting a dozer

When you are into the demolition business, there is no other heavy equipment better than a bulldozer. You can take care of your entire demolition business singlehandedly if you have a good dozer by your side and you know how to operate it. Operating a dozer is definitely no child’s play but at the same time it is also not some kind of rocket science that people will have a hard time understanding the basic functions and work with it on the jobsite. Learning how to operate a dozer is simple and one can also attend classes on it but what one may find difficult is to buy a dozer. Though a dozer is not overtly expensive heavy equipment as compared to other construction machines but for someone who has just started the demolition business may find it difficult to invest a chunk of money into buying it. So the best alternative for such a person is to take it on rent and continue working till he generates sufficient money to buy one.

It is believed by industry experts who advises people on construction related matters that transacting online is one of the best ways to take any heavy equipment on rent. So if you are looking for a dozer you have to simply register yourself on any site that deals with renting heavy equipment. There are few things one must make a note of while they are transacting online. Well the mode of payment is definitely one of the criteria, the most important thing that the taker needs to consider is how reputed the website/company is. You just can’t go with any website that claims renting heavy equipment. Firstly, these websites are mere platforms for the taker and the giver.

Ideally, these online websites ensure that they protect the rights of both the parties but you only need to check how stringent their policies are. Once you are able to jot down the company you want to deal with, the next step is to become a customer. Once you are a customer you can search for the dozer you want for your business. Doing a basic research on the type of dozer will help you narrow down to the one you want to go with or else there are chances that you may find yourself confused with the options available on the site.

Once you have identified the dozer, you need to contact the rental house for further communication. Talks like the rental amount and the tenure should be crystal clear. There should not be any confusion or any sort of misunderstanding when it comes to critical things like these. Remember to read the terms and conditions well and only if you agree to them that you should go any further.

B&R Equipment

How to build a lake with a dozer

We all have this thought that dozers are meant for mowing down huge structures and ramming down anything and everything that comes in its way but hardly do we know that it can also be used for building a lake. Though the need of other heavy equipment cannot be ruled out but if the work of building a lake is assigned to a contractor and he does not have any other heavy equipment apart from a dozer, he can still get the work done through it. He does not have to start hunting for an excavator or something that specializes in excavating work. However, one also needs to understand that this will take long for the work to complete and also the need of an experienced operator plays quite a crucial role.

So when you are digging the ground with the intention to build a lake with a dozer, you should first check the kind of dozer you may need for the purpose. Just because you are building a lake does not mean you should be using big dozers. At times small dozers can do the trick which big dozers can’t and therefore selection of dozers in this case is of utmost importance.

The crux of the heavy equipment comes while working in different forms of land. Not every kind of heavy equipment can stand in a sloppy land. The operator might find it very difficult to balance the position of the machine. The dozers may be a slow one but they can provide power, stability and have good traction which is perhaps the most required feature for building lakes. In order to dig deep, you can make use of some special blades that are designed for the purpose of making a hole in the ground. Well, these blades have some 6 movements. They can move right, left, up, down and can tilt from right to left and vice-versa. This position is specifically used to dig deep in the ground. You can also make use of rippers to break down a hard piece of land or any rock that you hit in the earth.

Using a ripper makes more sense because it has the potential to tear apart hard materials like rock and can thus help the dozer to dig deep without much hassle.

Buy Now on eBay

24 Keys Heavy Equipment / Construction Ignition Key Set

$48.00
End Date: Tuesday Nov-28-2017 7:55:30 PST
Buy It Now for only: $48.00
Buy It Now | Add to watch list

7 Keys Heavy Equipment / Construction Ignition Key Set

$14.95
End Date: Thursday Dec-14-2017 8:29:01 PST
Buy It Now for only: $14.95
Buy It Now | Add to watch list

Rent a Cat heavy construction equipment from B&R Equipment

Renting heavy construction equipment has never been as simple as it is in today’s time. Earlier when there was no internet and when people had to hunt for machines on rent, they were largely dependent on newspaper advertisements or classifieds that gets published in some magazines that is based on construction equipment or equipment salesman. Another mean to know if someone is renting a machine is through a person from their circle. Other than this, they were hardly any means to know if anybody is renting heavy construction equipment. Things have however changed for better now and with the advent of internet we are get what we want at a faster rate and we can also expect to get something better through internet. Nowadays, brand matters a lot and someone who is letting out branded items are invariably everyone’s choice.

We have B&R Equipment Company that is in the business of renting branded heavy equipment and one can indeed vouch for what they have to offer to the construction companies. They are in the business of heavy equipment for the last 20 years which makes them one of the most experienced in the lot. Experience does matter and when it matters it matters a lot. So a company with over 20 years of experience will suggest you machines based on your needs. If needed they will do an overview study of your project and try to understand what kind of heavy equipment will best suit your project. This will help them to give you better suggestions and this is what they have been doing since long.

You can vouch on them on any kind of heavy construction equipment. Right from a dozer to an excavator to scraper or a grader, all you have to do is name the equipment you are looking for to take on rent and you will get that at a better price; a price that you will not get at many places. So here you can get some real good branded machine at an affordable price. All you have to do is check their website and see the machines. In case, you need to speak to someone to get a better picture about the services you get from them, then you can get the number of the person and call them up to get all your questions answered.  817-379-1340

B&R equipment offers 200 hours of operation on every rental month which is far more than its competitors who are offering just 160 hours of operation per month. So in case, you have already taken the machine on rent, you can give it back and latch on to B&R Equipment Company for more hours of operation. B&R Equipment Company rental plan is of 30 days unlike other companies plan which ceases on the 28th day of the month which means you have to renew it on the 29th day. Going as per this calculation, other companies charges you 13 times in 12 months whereas B&R charges you only for 12 months. So if you want to rent a CAT heavy construction equipment it makes more sense to get it from B&R Equipment Company.

Stripping of the gears of crawler dozers made it more resourceful than it was few years ago

It was never simple to work on a crawler dozer and only the best operator was in a position to get the work done without causing any damage to the machine or to things on the site. Operators working on a crawler dozer were paid more than other operators as they were operating a machine that is not at all easy to work on. However, this is not the case now. With the dawn of new technology, things have started becoming simpler for the operators and also for people who own the latest model of crawler dozers. The installation of hydrostatic transmissions in the under 130 horsepower machines and the introduction of advanced GPS machine control system has completely changed the dynamics of the machine. What was once known for moving at snail’s pace and leaving work undone for most of the time has been transformed into a fast paced next generation machine that has the capability to crumble the mountains or move the minutest of dirt from the site. The hydrostatic transmission that is installed in the newer version of machines is dominating this class of dozers. If we compare the hydrostatic transmission, we see that in the year 1999, there were only 25 hydrostatic transmissions which have now increased to 38. There are only 9 power shifts transmissions which were 33 in 1999. Well, this change in technology wasn’t brought overnight. It came slowly and gradually and with sheer determination of the engineers.

One company to be specific should get maximum applaud for the success of this technologically rich dozer. It is John Deere that has been in the forefront of this rapid change in technology. What they did is they removed the concept of gears from the machine making it gearless equipment. By having done this, they have got a very good control over the speed of the equipment. It becomes very useful on a flat ground where you do not have to shift gears to slow down the machine. The equipment automatically slows down when the machine takes the load and the speed increases when it discard the load. In this process, the machine just does not loses its momentum which otherwise would have been a problem with machines having gears in it.

Other than this, when the machine is moving at a speed and there is a dip in the load, the operator does not have to do anything manually. All that will be taken care by the machine and will manage the load. One very important benefit of hydrostatic transmission is that it keeps the braking system quite dynamic. The operator only has to relieve the throttle and the hydraulic pressure in the machine will do the rest of the work.

How to change a transmission on a bulldozer

It is never easy to work on things that you do not know especially when it comes to fixing your heavy equipment and you have absolutely no knowledge how to go about with it. This is when you should depend on guys who are into fixing problem pertaining to heavy equipment. It is better that you give the machine to a mechanic who after checking the stuff will do what needs to be done with it. However, at times it becomes important for you to know a bit of fixing thing as well. You do not always get the mechanic handy and in situations like this you may experience the real trouble. You have work in hand and your machine is just not ready to work. It could be due to some problem with the transmission and in order to get it fixed, you need to open up a lot of stuff and the transmission out.

Ideally in a bulldozer, the transmission is located near the engine crankshaft and it remains attached there with the help of a flywheel or a clutch. In order to change the transmission, it is first critical to remove the stuff carefully from the place it is located. In case of a bulldozer once has to be very careful while getting it removed beside the engine crankshaft. He needs to be make sure that he does not mess up with the crankshaft or that will lead to further complication with the machine. You got to be absolutely sure that you know how to work things out and get the transmission replaced.

To learn things in a much better way, it is advisable that one should go through the user manual as the procedure is stated with pictures so that one does not go through a lot of hardship to understand how to change the transmission. You can also check how the mechanic works on your dozer. The way he spreads out the engine crankshaft and from there he pulls out the transmission. You can even ask the mechanic if you can give it a shot while he is there monitoring your work. In this way, you can practically try to change the transmission but if you feel that you are confident and can do it again, it is prudent that you do it in front of an expert so that in case you go wrong somewhere dealing with it, there will someone who can set things right for you.

One more method that you can adopt to learn to change the transmission is through training videos. Well, you get to learn a lot of stuff from there. You only have to enter the things you want to see and you get ample of options. Just pick the one you feel you should watch and check if that is the one you are looking for. For instance, if you want to check videos where people are shown changing the transmissions, you can do that on YouTube. It really helps but if you want to do it practically, better try things in front of an expert.

 

Looking to buy a bulldozer? Get some help here

If you are a person who likes to do some research before deciding to buy a product, then you are moving on the right track in becoming a wise buyer. Not many give an intense research before buying an item and trust that the salesman tells them. If you go by the words of the salesman and then buy the product you end up with 2 possibilities. Either you get a good product that you will cherish using it or you will get something that is not worth your money. Eventually, you will lose some money in that transaction. Imagine the same situation when you are buying an expensive bulldozer. You just go by the words of the salesman and buy it. You later understand that you actually wanted some other features with some other benefits and now you don’t have much option.

We would be stressing upon few points that you must do before you buy a bulldozer.

Know your requirement and conduct an extensive research on the product:-

It is very important to understand what you are actually looking for in a bulldozer. Today, heavy equipment manufacturing companies have come down with “n” number of models having various features and every additional feature will cost you more. Therefore, it becomes extremely crucial for you to first know your requirements before you even start your research work. If you have a mighty project in hand then the set of requirements will be different but if the project is small then you may need an altogether different set of machine. Once you have known your business need, the next step is to do some research on the machine. As stated, bulldozers are manufactured by various companies and they come up with different models. So you need to study the kind of model you may need for completing the project.

Allocate funds for the purchase:-

While you are on with your research, you should also keep in mind another important aspect which is the amount you can allocate for the purchase. Check if you have enough funds to pay upfront or you want to pay via easy installments at the beginning of every month. Only when you are completely convinced that your finances are in order and you won’t have any trouble financially after purchasing the dozer, you should go ahead with the purchase.

Renting a dozer or purchasing a used one:-

Just in case, you find the amount way high and can overtly pinch your pocket, you might even want to take the option of either taking the dozer on rent or buy a used one. A used dozer will comparatively cost lesser and he may evade from feeling the heat.

Medium and small dozer are equally effective:-

If you are of the opinion that big machines are more effective then it is time to change your thought. It has been seen that in most cases a medium/small sized dozer has been more effective than a large sized machine. So considering the kind of project and the site, you should be looking for a dozer that suits your needs.

 

Mid range crawler dozers are widely accepted by customers in the construction domain

Working in a small space will not allow huge equipment and you have to restrict the use to either mid-range or small equipment. When we talk about heavy equipment, it is not only about those big machines that you often see at construction sites but it is also about equipment that you see in your backyard clearing the garden or clearing the snow off the road. You do not always need a big dozer to clear the snow from the road. Imagine if the road is not that big to accommodate a big dozer, it will not be able to complete the work. In such a situation what you need the most is a mid range crawler dozer.

The demand for the mid range crawler dozer has increased over the last few years. People have begun to realize that it is not all about big machines but at times we also need something smaller in size to get the work done. This is how people have understood the importance of such machines and has led to the growing acceptability of it. Before we speak further on this, we need to understand what category of machine come under mid range and what goes above that. Machines that have horsepower between 130 to 200 hp are in the mid-range category. Anything falling short of that is a small machine and machines that have more than 200-300 hp fall in the higher range of machines.

A reports also suggest that the mid-range machines play a dominant role in the construction industry which was not the case few decades ago. However, not everybody likes to purchase high range equipment and keep themselves content with the lower version. Irrespective of the construction company being a big one or just a newbie, they all prefer mid range machines. The maneuverability of such machines are simpler and faster and are therefore considered potent for work that is meant for small range as well as high range equipment. Caterpillar’s Dave Cusac feels that though some companies want mid range machines to have hp more than 300 but due to certain technical alignment, it has been limited to the range of 150 to 215 hp.

Mid range crawler dozers have varied uses. They are not just used for single category of work but are used for several purposes and this is what makes the machine more in demand. Case Construction Equipment brand marketing manager has bifurcated the use of the machine on the basis of the horsepower it possess. According to him, the machine with hp of 130 is used for construction of roads and bridges but not into residential construction. Machines with hp of 150 are also used for building of bridges and roads but they can simultaneously spread their wings into larger jobs. Machines more than 214 hp can be used for mining, overburden clearing and similar operations. Having said this, it does not mean that these machines do not have the capability to perform heavy duty jobs.

Benefits of Bulldozer: Earth Moving Equipment

Familiarized in 1920 and employed extensively ever since, the bulldozer widely recognised as dozer, is a clear descendant of the crawler tractor. Applied in combination with the earth moving apparatuses, the bulldozer is a potent and indispensable gizmo utilised in more or less every construction site of the world.

The earth moving heavy equipment, bulldozer was primarily manufactured in United States by some of the heavy equipment manufacturing companies like Case Tractor Company, John Deere and Caterpillar. This earth moving weighty paraphernalia proffers engineering application to several fields for instance agriculture, waste management, construction, mining etc.

Components of an Earth Moving Heavy Bulldozer

Bulldozer characterised for its versatile track and immense blade is comprised of several engines, pneumatic and construction assemblies. Here in the below cited points, the readers will get to know about the various essential parts of dozers:

  • The mainframe and the undercarriage parts of the bulldozer are made-up of low carbon structural steel platters.
  • The cab of the dozer is fabricated from plastic, rubber and glass materials that help in improving the ergonomic feature of the paraphernalia.
  • The steel made parts inside the engine of the bulldozer have the capability to bear the high operating temperatures.
  • When the dozer is filled with assorted sorts of fluids like oil, coolant, hydraulic fluid and fuel, its weight augments drastically.
  • Paint, decals and the patterned trim of the dozer helps in creating it the most artistic and appealing earth moving heavy equipment.

Advantages of Bulldozers

  • Dozers are big-sized weighty vehicles making them a perfect option for cleaning construction sites and for the purpose of demolition. The high-quality tracks offer bulldozers a distinct benefit permitting them to be astonishingly invariable for their excessive weight.
  • The tracks of the dozers have the quality of strong grip that assist them to undertake the rough terrain. These tracks also help the bulldozers to distribute their heavy weight thwarting them from submerging in dirty or mud-covered land.
  • Bulldozers are famous for their quality of grasping the ground tightly that gives them exceptional potency to shove and pull the obstructions coming in their path.
  • Some of the replicas of tanks attached in the dozers have the ability to pull up almost 70 tons of weight and are especially utilised for construction and military purposes.
  • In a bulldozer, the customers can find chiefly three types of blades that are straight, universal and S-U combined blades. These blades are normally employed for grading, carrying extra materials and for shoving large-shaped mound of rocks for instance quarry.
  • When the bulldozers are used in battle fields, the blades are attached on the battle tanks for clearing various anti-tank obstructions.
  • If the construction business owners want to buy dozer with stump buster, they get the additional benefit of brush scrape blade that helps in clearing in the land effectively.

So, if you are looking for an upgraded version of bulldozer, you can find it very easily by browsing the internet, as there are scores of dozer manufacturing companies that provide efficient modern technology designed dozers in reasonable price.

 

Growth in the world of heavy equipment

The technology of heavy equipment is growing rapidly nowadays. No one can deny the fact that this development of science extremely useful in detecting any kinds of damages in the equipment regularly. By using the technology of global positioning satellite, one can check the condition of the constructional heavy equipment even if it is placed at a great distant from the observer. Picking out the right equipment for the construction site is becoming a great challenge with so much new models coming out in the market every year. The sellers are offering lots of options and interesting features which ultimately make this troublesome task quite interesting.

Equipment used in construction sites

Among the many heavy equipment available in the market, backhoe loaders are gaining a strong hold in the constructional site as they are used in small tasks of demolitions, breaking down of the asphalt, digging or excavating the holes, to power the building equipment, little transportation of material building and paving of the roads. To smash up rocks and huge chunks of concrete, many people use breaker tools in place of backhoe bucket. To get rid of the loads efficiently and quickly, some of the loader buckets contain a retractable bottom. This retractable bottom of the loader buckets are useful in scratching and grading off the sand. The front side of the bucket has some devices which is either permanently seated or can be removed whenever needed. Most of the times, other constructional tools replace the bucket. The backhoe loader must have a tool coupler to get various types of fastening to the loader.

Bulldozers are large sized heavy equipment and they can easily go over a course terrain because of the mobility and a strong hold of the ground provided by the big trucks. Bulldozers have swamp tracks which are only extra-broadened tracks.

Compressed hydraulic excavators have three unique collections of undercarriage, workgroup and house. The arm and the boom along with breaker and buckets comprise the workgroup of the hydraulic compact excavator. All of them are attached to front portion of the structure of the house of the excavator through an oscillating frame which will allow the workgroup to be pivoted hydraulically right or left to do balance digging needed for trenching.

Today, the harvesters do all the tasks related with commercial felling in Finland and Sweden. They clear their ways by cutting down the forests and can work more easily on smooth terrain. To thinning out the debris, small harvesters are used particularly in the Nordic countries.

Pile drivers also do a lot of work with two rods of metal containing a cylinder between them. This design makes it move freely with the up and down sliding. To remove the cylinders, workers make use of a pulley system. It also involves the use of hydraulics or steam. To lift the cylinders, small explosions are also sometimes made in the chamber.

All of these heavy equipment have their own applications. So, one has to choose the equipment carefully deciding what kind of job he is going to do.