Monthly Archives: January 2016

Buy small range heavy equipment. They are really worth it

When you are into the construction industry, you got to deal with all sorts of heavy equipment; be it large, medium or small range machines. It is also pretty obvious that you can’t always use a large range heavy equipment to do all kind of work. At times, you do require a medium or a small range heavy equipment to get certain work done. For instance, if you have to excavate a land and the opening through which you will get into it does not allow big machines, then you are left with no other option than to make use of a small range excavator. It may not be able to lift the load that a large range could have but it still will manage to do the same amount of job that the big one could have done. So here, you do not have to bother about that you can do to excavate the land with a narrow opening. Just get in with a small range excavator and get your things sorted.

Though the payload capacity of the small range heavy equipment is lower than the bigger ones, it still have the capability to move fast and complete the work in due time. Moreover, for small contractors or small construction houses they need not go for those big machines that cost them a fortune. They could rather depend on the small range heavy equipment as they are not much expensive and can easily fit in their budget. The maintenance costs of these machines are also lower as compared to the bigger ones. So you end up saving a lot of money after you have bought the equipment. If you have a limited budget or are planning for any expansion, then these small range heavy equipment are the best that you can think of.

It is pretty obvious that if you are working on multiple projects and you have one of your projects going in full swing where you have exhausted all your heavy equipment and feel the need to buy few more machines for your next project, then the best available option is to install small range equipment. These machines are not so expensive and can fulfill your requirements for the time being. Later when you feel that you can maneuver the bigger machines for the new project, you can bring them in and replace the smaller ones or let them both work in sync.

In case you are planning to buy small range heavy equipment, you can either visit the showroom of the company and talk to the salesman about your requirements or can check the quotation with a dealer and see if they can provide you a better deal. One more option you have is to check the stuffs online as there are many online shopping sites available that has the reputation of selling real good heavy equipment. You can compare the price quotation that you get from all the corners and then take your decision.

 

Heavy equipment industry likely to grow in 2016

The year 2016 has a lot of things in store for the heavy equipment industry. It has been predicted as the year of prosperity in the construction domain and therefore there will be an up-beat in the heavy equipment industry as well. The sale figure of heavy equipment is assumed to rise. However, it is to be seen that which company will make the most and which one will stand at the edge. The year 2015 has overall been a good year as far as the construction industry is concerned and experts have come down with the analysis that this year will be no different in spite of political uncertainties that has gripped most of the industries. It is perhaps the construction, mining and heavy equipment industry that will not bear the brunt of the uncertain and volatile market. It has more happy time to witness. Apart from minor hurdles things are expected to be well for the industries that are closely connected with the construction sector.

Since the construction industry is doing well, more such businesses are blooming and people are in the mood to buy more advanced heavy equipment. They being more concerned about the environment and hence things are gradually moving towards attaining environment friendly machines. This has given rise to an increase in the demand of heavy equipment that are low of carbon emission and does not harm the environment like the earlier versions. Countries like Germany have induced millions of dollars to produce eco-friendly heavy equipment because they feel that the future of heavy equipment is these eco-friendly machines.

Many other countries are following suit. Though they have not completely given up on producing orthodox machines, they are giving extra impetus on producing green machines. Talking about the overall heavy equipment industry, it seems that the companies in Europe have managed to rope in an increase of 19% in the total sales figure. This is quite a dramatic one as it was not so often seen in the last many years. The sales figure only suggest that on the whole the future of the construction segment is going to be terrific and people can expect to make good business. Not just the old construction house but even the newer ones are getting enough business which is indeed a very good sign for the entire business. Market experts are all happy with the way the market is performing but some are also asking companies to be a bit cautious and not overspend on buying heavy equipment.

The news headlines in the US is no longer coming up with stuffs that speaks ill about the industry. Though some companies may have suffered loses but that does not reflect the complete mood of the industry. So it seems things are better off in the US. If we check the Middle East, there are enormous growth opportunities present for the heavy equipment industry. Countries like Saudi Arabia has shown tremendous growth as far as the construction segment are concerned. This has further glorified the prospect of heavy equipment industry for the year 2016.

Caterpillar 312 Excavator

Over the last few decades we have seen the construction industry has developed manifolds and is continuing to grow at a very steady pace. This certainly means that people who are linked with the construction as well as with the heavy equipment manufacturing industries have a lot to gain in the next many years to come. Since we are just in the beginning phase, we have a lot to make and for which we need more sophisticated heavy equipment that has the capacity to endure more, deliver more and cost less when it comes to maintenance. This is probably what many expect from their machines. The most common thing that one ever witnesses when he approaches a construction site is an excavator. You need to dig the ground to put up any kind of foundation and for that you need the best of excavators which can dig deep inside the ground and carry all the mud out.

When it comes to buying an excavator, no name other than CAT comes into the minds of people who have been using CAT products. The reason is pretty simple. CAT is renowned for producing machines that are not only reliable and cost effective but also consumes less fuel and are low on maintenance. So machines that cost you low on maintenance and does not pinch you hard when it comes to fuel does invariably become the number one choice of users.

Speaking a little briefly about the CAT 312 excavator, the gross and net power of this machine is 94 hp and 90 hp respectively with a displacement of 259.4 cu in and the power is measured at 1950 rpm. Moving towards the operational side of the excavator, the total operating weight of the machine is 12778 kg. The total fuel capacity is 66 gallons. The cooling system, hydraulic system, engine oil and swing drive fluid capacity is 4.6 gallons, 42.8 gallons, 4.6 gallons and 0.79 gallons respectively. The alternator supplied amperage is 55 amps and the hydraulic system pump flow capacity is 33.5 gallon per minute. The swing speed of the machine is 12.9 rpm and the swing torque is 22496 lb ft.

Talking briefly about the undercarriage, the shoe size of the machine is 24 in with a ground pressure of 4.8 psi. The maximum travel speed is 3.4 mph. speaking about the bucket, the minimum and maximum bucket capacity is 0.31 yd3 and 0.98 yd3 respectively. Talking about the stick, The maximum digging depth of the stick is around 18.2 ft in and the maximum cutting and loading height is 27.8 ft in and 20 ft in respectively. The maximum vertical wall digging depth is 16.3 ft in.

Looking into the dimension of the machine, the width to outside of tracks is 8.5 ft in, the height to the top of the cab is 9.1 ft in and the ground clearance is 1.4 ft in. CAT 312 excavator can be purchased directly from the manufacturer and also on the internet.

Care for the environment by procuring green machines

During the recent climate summit that was held in Paris and was attended by almost every nation of the world, they all came down to a common ground and that is to reduce carbon emission and subsequently saving the earth from global warming. Well the term Global Warming has now become a big threat to the existence of every human being as we are all in some way or the other are getting adversely affected by it and it is high time that we all act to tackle the menace so that we can give a cleaner environment to the next generation. Heavy equipment has become a major contributor of emitting harmful carbon in the environment polluting it further and making lives riskier. The amount of construction happening all over the world and the number of heavy equipment used to work on each project can only talk aloud about the aftermath it can have on the climate.

The orthodox types of heavy equipment not only pollutes the environment but also proves to be unhealthy for the company’s expenses as it consumes lot of fuel to work continuously on the jobsite. This should be replaced by environment friendly machines that does not emit large amount of carbon and also consumes less fuel. Engineers are also working on machines that work on bio-fuel, biodegradable and things thereon. They have also introduced some heavy equipment that are very eco-friendly but when it comes to performance, it can hardly match the conventional ones. This is why they have not yet caught the attention of the big construction companies. Though many big construction companies eagerly want to take up eco-friendly machines; however, it is just that they also want those machines to perform faster which unfortunately is not the case for the time being.

The way forward is pretty simple. The engineers of heavy equipment construction companies have to work hard to manufacture a league of machines that has the capacity to work like the conventional machines and at the same time are also not posing any threat to the environment. As a matter of fact, they are already working towards it but getting a milestone is probably a bit far stretched. Secondly, the green heavy equipment will be very expensive as it will have all the latest technology that will cost more to the end user. This means that not everybody will be able to afford to buy them. This will result in just few construction companies taking up the onus to a cleaner environment and the rest will keep on polluting it.

This will definitely not serve the purpose and might further create a divide within the industry making things more complex. The solution to this will be with government intervening and announcing some kind of concessions to companies who are using environment friendly machines. This will boost other companies to follow suit and this is how more and more construction companies will adopt the idea of using green machines.

Hiring ace salesman for 2016

Heavy equipment companies have by now realized that the year 2016 will be a wonderful year for them as far as the sale of heavy equipment is concerned and perhaps this is why they are recruiting salesman in high numbers. They need qualified as well as experienced people who can do the high pressure work with ease and also guys who will stick to their company for years. People who have studied from management schools are welcomed.

There is a huge requirement of people who have studied sales and marketing and know a bit about heavy equipment. Guys belonging from heavy equipment industry can also expect fat packages thus making it an awesome opportunity for everyone. Heavy equipment companies are not only hiring salesman for North America but also for European and Middle East countries. The businesses in Africa are also catching up and therefore there are also opportunities available in these countries.

Since the construction, mining and oil industry are doing well all over the globe, there has been a rise in the employment of salesman. One of the important criteria is that the candidate should be ready to travel and he may have to stay out of station for months and could be even years. Though such candidates will be paid more than the others but they got to be tough and should not feel homesick. Getting such guys is real tough and therefore people who are approaching these companies for interviews should make up their mind in advance and also should be ready to move in case they are being asked to.

There are also certain prerequisites that these heavy equipment companies have from the aspirants. They want them to have some degree of knowledge in heavy equipment. They may not know about the technical aspect as that will not be needed much when you are trying to sell machines but knowing them will always help. You may come across few companies that want their aspirants to even know about the technical aspect. If not in complete detail but definitely should have sound knowledge about what they are dealing with. For instance, if they are trying to sell a machine that is used to extract oil, then ideally companies prefer the salesperson to know the basics of the machine and in case if he manages to gather more information then he stands a fair chance to get quick promotion. So the knowledge he has about the subject can fetch him good results.

Countries like Saudi Arabia, Dubai and other Gulf nations are busy constructing sky touching buildings. The construction companies out there want hi-tech machines that simply the job of the operator in many ways and also help to get the work done in a shorter time. Here the role of a knowledgeable salesman becomes quite essential. He will then not sell machines that are being asked to him to sell. He will rather try to understand the requirement of the client and pitch his products accordingly. This approach of his will be highly appreciated by the company and he will have a higher chance to sell more equipment. Overall, the year 2016 will be a good one for heavy equipment salesman.

Borrow money to purchase heavy equipment or take it on rent

Starting a new project and need heavy equipment? You are ideally left with 2 options. Either you can rent construction equipment or you can go ahead and buy it. The thing that you need to take into consideration is if you have hard cash to buy the machine or you need to finance it from a lender. The other option is more viable under certain conditions. You should rent the machine if you only need it for the project and once the work is done you have to discard it. If you fall in this condition, then renting the machine should be the most viable option for you. However, if you feel that you will require the equipment for your future projects as well, then it makes every sense to buy it.

Do not drain out all your reserves to buy the equipment:-

Just in case if you have hard cash available to buy the construction equipment, it is advisable that you do not shell out all the money to buy the machine. You never know when you will need the money and if you end up everything to procure the new machine, then you may have to experience some hard time to fix tough situations. What you can rather do is make an upfront payment of 20% of the total value of the machine and the rest borrow it from a lender. It is important that you do a thorough study of the different interest rates being offered by the financial institutions. Go to the one which will charge you with a lower rate of interest and also will not charge much closing costs. Take a calculated decision when you intend to buy a machine.

Ensure to pay your monthly payments in time:-

If you intend to purchase the machine and borrow money from a lender, you should also ensure that you pay your monthly payments in time. Please do not become a defaulter for even a month. That will have a huge impact on your credit score. So when you think about borrowing money, you should also keep in mind that you can’t play around with your credit score. These things must be planned in advance and if there are any deviations later, then that must be taken care by the reserves that you have with you.

In case you decide to take the machine on rent then you need to analyze the period for which you may need the equipment and how much are you ready to pay as rent.

Check online to rent a machine:-

The simplest option to locate the person who wants his machine to let out is on the internet. You can just type the kind of equipment you want to take on rent and the search engine will throw all the option that it has or call us at B&R Equipment. You can check the one you want and contact the giver. If you agree to his terms and conditions, you can finalize the deal.

Construction rental equipment

Buying heavy equipment are not everybody’s cup of tea. They are very expensive piece of metal with state of the art gadgets fitted on it. Though it is the requirement of every construction company big or small, not everybody can afford to buy it. It is therefore taking one on rent considered to be the most viable option. It is pretty obvious that you got to run your business and for that you need good machines. In case, you are not able to afford to buy them does not mean you should quit the work. You should search for alternatives and in this case the best would be to rent it from someone who does not need the machine.

There are many people who are willing to rent their machines. They do it because either their machines have gone old and they have already bought an updated version or they simply do not need them any longer for their existing projects. It is also better to not invest good chunk of money in buying heavy earth moving machines and rather utilize the money for completion of other useful tasks.

Construction rental equipment can be found in websites that deals with renting heavy equipment. You just have to become a member of one such website and check out the machine you want in your project. If you find everything perfect, you have to contact the giver, negotiate the price with him and finalize the deal. These websites have made things very easy and comfortable. One only needs to be careful while he is looking for the machine. He needs to very carefully go through the description and that is it? It helps in knowing if the machine he is looking for meets his requirements or else there won’t be much use for him to go through this.

The giver on the other hand also needs to ensure few things. Firstly he need to make sure that the machine he listing to let out should not have issues that will become a hurdle for the end user. In case, if there are any complications on the equipment, he needs to get it checked by a mechanic and make it all ok for the user. Since the heavy equipment has to go through a lot on the jobsite on a daily basis, there are high chances of it getting torn from inside. The giver can’t let out the machine in that condition and therefore the need of a mechanic arise. In case if there are any dents on the machine that also needs to be rectified.

Before listing the machine on rent, you should take some pictures of the equipment from all angles and put it on the listing. This will allow the viewers to understand if the machine is in good order. Rest should be mentioned in the description. Also, mention the rental amount and if you are willing to negotiate with the price. Leave your contact details on the listing for people to reach out to you.

2016 will be the year of heavy equipment

Since heavy equipment industry and the construction industry are so closely interconnected with each other that they have an ever lasting impact on each other. For instance, if the construction industry is not doing well, the impact will definitely reflect on the heavy equipment industry as well. Heavy equipment companies will find it hard to sell their machines in the market as there will be no buyers for them. If the buyers are also having a hard time to deal with any crisis that comes up in the construction sector, they are most evidently not going for any more purchases of machines and will wait for the market to resurrect. Till that time, heavy equipment companies will be out of business.

However, things are better off and the year 2015 was indeed a good one for both the industries. The construction sector was at its peak and so was the heavy equipment industry. It was believed that no other sector was able to generate employment as much as the construction sector and they had given big orders to produce earth moving machines. Moreover, with the advent of Paris summit that was held last year, it was urged to many such heavy equipment producing companies to concentrate of manufacturing machines that emit less carbon. The goal is to reduce carbon footprint so that we can all make this world a livable place and are not tormented by natural calamities.

After this summit, government of various countries have asked these companies to focus on producing green machines and are simultaneously also trying to prepare a market for it. Governments are ready to waive some taxes if the construction companies are willing to go green and reduce carbon footprint. This will be a big step towards having a clean environment and may also garner support from people within the industry. Once the government of all countries issues law that will state companies using green heavy equipment will save on tax for the next few years there will be an increase in the sale of eco-friendly machines. Big construction houses will no longer want to work on the traditional machines and will demand for green machines.

This will give the opportunity for the heavy equipment manufacturing companies to design machines that emit less carbon. It is therefore believed that the year 2016 is an instrumental year for both the construction and the heavy equipment industry. This year will possibly see a change in the nature of machines and the earth moving companies will have to work hard to keep up to the demand of the construction industry. Since this will be the beginning, the heavy equipment companies have to ensure that the machines they produce should be of ace quality as there are high chances that due to shift in technology they might end up messing the overall product. They have to make sure that the goodwill that they have created and maintained should not be tarnished by the change in technology.

Heavy equipment fuel consumption

It is probably heavy equipment that consume more fuel in a week than your car in an entire month. Well, this is the fact of the day and one need to accept it. Though many heavy equipment manufacturing companies claim that they are in the mode of producing machines that will consume less fuel and will be more efficient as far as the production is concerned. However, the fact also remains that such heavy equipment will be very expensive that it will not be in the range of every owner of the construction company. Therefore, it has become a reason of worry for most of the companies as they feel that they have to work by paying more for the fuel and if they can afford to ever buy an eco-friendly machine then they will move on to it.

We also need to understand why the consumption of fuel increases in a machine year after year. The basic answer to this is perhaps we fail to take good care of the machine which is one of the most crucial reasons why it starts getting converted from low fuel consumption to a high fuel consumption machine. There may be many other reasons associated with it but this must be the main reason. Taking good care of the machine involves timely servicing, cleaning the stuff with power washer to get the dirt out of the system, lubricating its interiors on a timely basis and also changing the engine oil to lengthen its life span.

Also most of the heavy equipment are overworked. For instance, there is a big project in hand and there has been unanimous decision to keep the machines working all through the day. Here the equipment do not get much time to cool down especially during the summers where it has to experience the maximum brunt. It is in no way good to keep the equipment unhealthy because at the end of the day things will come back to you and there will be a point when you will find them not working and you will run out of machines.

Servicing the machine on a monthly basis will ensure the good health of it and that will also increase its fuel efficiency leading to less consumption of fuel. So you do not spend a fortune on buying gas. Other than this, you should also follow the user manual to understand what you can do to keep the fuel consumption intact. A bit of research is also needed when you are in the mode of buying heavy equipment. You should do your study well and understand which machine consumes how much of fuel. That becomes an important task while you are into the shopping mode.

These researches can be done by collecting information from internet or by reading magazines that’s related with heavy equipment or by simply asking for suggestions from your friends or peers. These things really help you to take an informed decision and also save good deal of money by buying machines that consumes less fuel.

7 Simple Tips for Young people starting a career in Construction

When one thinks about beginning a career in the construction sector, he needs to be pretty sure what he is getting into because though this industry rewards people who work hard to achieve success, it also punishes those who are not able to perform. So one has to be sure which side he wants to be in. There is no rule book that one can follow to make a career in the construction business; it is just that they need to be patient enough and follow what is right and ethical. They won’t be able to taste success in a year’s time. They got to work hard and if they feel that things are not working right for them, then they need to work harder. Follow the right path, devote yourself completely and you will see things working out for you.

Give a thought before you finally pull the trigger:-

You should not want to make a career in the construction domain just because you see your friend’s dad making huge sum out there or you see one of your relatives doing good in his business. That should be a motivating factor for you as they all must have worked extremely hard to get to the place where they are now but that does not mean that you should do exactly what they did. You can get success in anything that you do provided you give your 100% to your work. So before you decide about walking in this industry, think if you really want to stay here for your entire life or else you will end up wasting couple of years of your life into this.

Know more about heavy equipment:-

Knowing about heavy equipment is very important if you want to be in this business. You should know which machine is used for what purpose and accordingly you can take decisions on procuring heavy equipment.

Check your finances before you go for any procurements:-

Starting a business in construction sector is no child’s play and it requires huge amount of investments. You therefore need to check your finances before you go ahead with any procurements of construction machines. You also need to keep into deliberation the operating and non-operating expenses that may incur while you are active in your business.

Hiring competent operators is the key:-

Ensure that you hire competent operators who are experienced in working with different kinds of heavy equipment. They are the ones who also know what needs to be done to keep the heavy equipment healthy.

Try to generate contacts by picking up small projects;-

Since you are new to this business, it is pretty evident that you will not be able to bag big projects as the giver won’t have the confidence in you. Simultaneously, it will not be feasible for you to handle big projects if you do not have any experience in handling any projects. It will be complete chaos. Therefore, pick up small works and try to complete them on time. This will help you to gain experience and simultaneously you will also develop contacts.

Be honest and ethical to your work:-

Honesty and ethics are very important in a business where you are dealing with your client’s trust. Be honest with your work and maintain ethics while conducting our business.

Engage with your employees:-

Always maintain a good rapport with your employees as they are the ones who will work hard with you to give a good shape to your business.