Monthly Archives: August 2013

Tinted windows- an essential safeguard for heavy equipments

Heavy equipment are usually referred to the heavy machinery and the operators used for the execution of construction work. These heavy equipments are engaged in different sections of several technical works with their diverse appellations. These are the reconfigured portable mechanisms with core traction engines evolved with the prolonged power source along with the augmented exertion of force than that of the applied one. From soil excavation to recycling operation, these heavy construction operators are exploited even with a round the clock service. So this technology has to be secured in order to the development of these heavy duty equipments.

Window tinting knowhow:

At first you should be perceive of window tinting according to the terminology. Window tinting is a retrofit upgrade of your existing windows of cars, buildings or heavy equipments. It is as simple as settlement of a thin film on the wide screen or reflecting glasses to facilitate the drivers to drive with ease in order to protect from the UV rays of sunlight.

Benefits for heavy equipments:

Tinted windows are one of the principal factors in the construction of the heavy equipments in order to the legal legislations of that particular country. Because now-a-days tinting of windows is abolished in multitude countries and many of them has allowed this factor along with some strict instructions. Apart from that we should consider the broader consequences of window tinting in the commercial vehicles and the heavy equipments as well. The vehicles are not permitted to install the window films on the wide screen; it can be applied on the rear or either side of the driver. The benefits of window tinting in heavy equipments are as follows.

¨  The first and foremost precedence of window tinting is to prevent significantly the glare of the sun in order to protection from the UV rays which notably increases the visibility of the driver particularly in the heavy equipments as they are supposed to carry heavy weights and difficult excavations.

¨  The upholstery of your heavy commercial equipment may be damaged by getting heated. Window films exceedingly enhance the durability of the upholstery of these vehicles approximately by 60 percent.

¨  The heavy equipments are designed to be fitted with bodies to carry a load behind the driver. The type of vehicle construction reduces the need to see through the rear windows when driving. Therefore there is no minimum VLT for windows rearward of the driver which refers to a dark tinting of the windows.

¨  As everyone want to maintain a cool temperature within the vehicle that’s why some people uses window shield in the heavy equipments’ windows too in order to overcome the evident which is completely inconvenient as to be memorized each time to install them. Window tinting is a far better option to surmount this trouble.

¨  Breakage of window pane is quite normal for the heavy equipments as those are engaged in heavy duty all time. Window films provide a significant reinforcement to the glasses as it adheres the glass pieces even when it get smashed and crumble down. Window tinting has an important contribution in minimizing the injuries.

 

Use Hydraulics to Give More Power to Your Excavator

When you are into construction or mining industry, you need to have the best of the machines with you. A construction house can never in his widest of dreams imagine to compromise on the quality of machines because it is the machines that gets him the work done in the due course of time. Therefore, it becomes his responsibility to ensure that he has machines with high power deliverance and can work under rough terrain. Well, if we are talking about power in heavy equipment, things that come in our mind are the equipments engine, consumption of fuel and if it is a hydraulic machine or not. With the advent of the technology of using hydraulics in heavy equipment, it has changed the very look of the construction and mining sectors. These sectors are now blessed with the power of using hydraulic technology and can thus get the work done in a comparatively lesser time.
Here, we would be discussing more on hydraulic excavators, companies that produces hydraulic excavators and the various modes by which one can buy them.
Let us first understand what hydraulic is all about. In layman’s term, hydraulic is an incompressible liquid fluid on which if force is applied from one given point, it gets transmitted to the other point, thus giving more power to the machine. Modern day heavy equipments come with a couple of hydraulic cylinders so that if one stops working due to some reason, the other would take it up from the first one and complete the task. It also has pistons on which the force is applied to get the work done. In order words, when force is applied on the hydraulic cylinders it goes on to the pistons resulting in getting the work done.
Many companies like Caterpillar, John Deere, Hitachi, Volvo etc are making use of this technology to give more power to their excavators. As the work of the excavator is to dig deep in the ground, it invariable requires more power and nothing other than the application of hydraulics can suffice its requirement. The engineers of heavy equipments manufacturing companies are working hard to come up with more such technologies where the use of hydraulics can give excavators the extra strength they need to complete the work in comparatively lesser time.
Now as far as buying hydraulic excavators are concerned, there are various modes that one may adopt.
Buying it directly from the company/dealer:- You can directly approach the company and read out your requirements to them. They would then provide you with the kind of an excavator you need for your business. These companies have their experts in the customer service domain who after understanding the requirements of their clients come out with alternatives that suits their needs.
Buying it online:- This is a new trend which has started probably a decade ago. Earlier people bought accessories and apparels online but in the last few years, there has been a significant increase in the purchase of heavy equipments through online selling sites. Here you can get to know the specification and features of the excavator which helps you take the decision of buying it. Elsewhere, you get the manual after you’ve bought the machine.
Hydraulics has perhaps brought a revolution in the heavy equipment segment and we are all hopeful to see more advanced technologies hitting the market in the near future.

Want To Buy Construction Machinery Equipment – Read This Before You Decide

Irrespective of you having a start-up construction business or have being running it since a long time, the pre-requisite of any successful business is good construction machinery. The skills of the workers also play a role in shaping up your business but more importantly it’s the kind of machines you have that indicates where your business will be in the next few years. Alternatively, you also have to keep on upgrading your heavy equipments which largely depends on what kind of system the operator needs to get the work done. Engineers of heavy equipment manufacturing companies are working hard to bring innovative changes in the technology of the machines which in turn would be helpful to the operators.

Buying construction machinery equipments largely depends upon the kind of project you are into and if at all the operator can comfortably operate the machine. Below are some points which suggest when you should go for buying heavy equipments.

You company’s finances are in order:-  Important financial decisions can be taken only if the financial situation of the company is well in order. If you have just started up with a construction company, it’s advisable not to go for a buying spree. That will not only hurt your company’s finances but will also deter you to invest any further in upcoming projects which in turn will result in huge losses for the company.

Out of projects:-  New entrepreneurs often commit the mistake of buying heavy equipments and keeping their guns ready to fire. However, it gets too late for them to realize that they don’t have any projects with them and have to pay monthly installments to the bank, failing which the bank may confiscate the equipment. Hence, it is recommended that one should not jump into starting up their own business as long as they have not earned some level of maturity and a bit of knowledge in their respective domain.

Using alternatives:-  Buying is perhaps not the best available option when you have other option at your disposal. It makes more sense to take the equipments on rent rather than spending a fortune to buy them. The moment you bag a project, the next thing would be to begin taking heavy equipments on rent. You’ll find plenty of people willing to give the machines on rent. Make use of those opportunities and try to save your money for expanding your business.

Do some research before you finally decide to buy:-  This point is applicable for companies who are in this industry for a span of 5 years or more. They might be pretty settled as far as their business is concerned and can look for avenues to buy brand new and technologically advanced heavy equipments. It’s rather imperative for them to do a thorough market research and check which heavy equipment would apt for their project. Also check if buying them directly from the company would be advantageous or simply shopping it from the dealer would help them get more discounts. Also, look for other avenues before taking the final call for buying construction machinery equipment.

Do Heavy Equipment Require Different Attachments for Demolition – Find out Here

Heavy Equipment if not the soul then they are definitely the backbone of the construction and mining industry. Without them, it is unimaginable to do work with the same level of speed and magnitude and it might take several days for a small work to get over with. This will definitely cause good sum of loss to the project owner and that can even bring his project in jeopardy. However, the construction or the mining industry is not only restricted to heavy equipment but it has something more to do than that. It is the demolition attachments.
Heavy equipment are undoubtedly the power behind the demolition attachments but it is eventually the attachment that does the trick. A number of attachments can be installed in heavy equipment provided it should be compatible enough to get them fitted in it. What sort of attachment should be fitted on the machine depends largely on the nature of work as every attachment is used for a specific kind of work. Therefore, the kind of work determines the sort of demolition attachment needed on the machine.
We would be discussing in length about the different form of attachments and for what purpose are they used.
Buckets:- A bucket is installed in a heavy equipment to move earth and dump it in a truck so that it can be moved from one place to the other. Most of the buckets have sharp clips which are used to dig the earth and then with the help of the hook that is attached to the bucket, it takes off the mud from the earth and fill it in which is then carried and dumped in the truck. At times, the buckets are also used to break a wall which may not be that strong to hold it for long.
Rakes:- Rakes are found in different shapes and sizes and each of them are built for specific purposes. However, the one which are fitted in heavy equipment are big strong ones with sharp iron fingers bent towards the bottom which facilitates to dig deeper in the ground. These rakes are specifically used for agricultural purposes and may not have much use in construction business. Rakes of various types are available right from cleaning the grass of your garden to ploughing the field. It is considered to be one of the most essential attachments.
Grapples:- This is an important tool which is used to hold a stuff and pull it from its surface and place it at its designated position. The grapple has a claw which is used to hold things and moves it from one place to another. Hydraulic grapples are used in many heavy types of equipment which gives it more power to perform things with precision. It can be fixed with a tractor or an excavator and the end of its arm which is powered by hydraulic and allows it to move heavy things. The grapple is controlled by the operator of the machine who manoeuvres the arm of the machine in every possible direction and makes the toughest work look simple to perform.
Also don’t forget about Hydraulic Hammers!!!!!!

Job of a Heavy Equipment Operator

Job of a Heavy Equipment Operator

Working as a heavy equipment operator needs skill in the person who is doing the job. It is definitely not a cake walk for a person to first understand the complex function (though with time, there have been rampant technological changes that has led to simplify the functionalities and has made things quite easy for the operator) and then run the machine without doing a single mistake. The operator of the machine is well aware of the consequences that may happen if things go wrong from his hands. It may lead to some major casualty. But the important question is from where does one can get these brilliant operators and how can they test their ability to operate the machine efficiently.

We would be discussing in length about what kind of training one has to go through to operate heavy equipment that makes him a competent operator.

“Heavy Equipment Operators” are also known as “Operating Engineers” are required to clear their class room as well as hands on training where they are trained everything about the machine. The total duration of the course is around 4-5 years which includes vocational programs for 2 years and the rest is apprenticeship training of 3 years. In the apprenticeship, he gets to learn to work on multiple equipments and is also paid on-the job training. Let us now understand what kind of training one gets from classroom sessions and then from the practical ones.

Trainings received in the classroom:  The classroom sessions are considered to be the most critical part of the training. It is here that the students are introduced to their future and they learn every smallest thing in great detail. Special consideration is given to teach the safety measures to students and all have to adhere to it during their practical sessions. They are also taught about the utilities of each machine and are given assignments to complete pertaining to what they have learnt in the office. They are also told about engines but that is not taken in detail as the students need a practical training to understand the different features of an engine and what lubricants are needed to keep them moving.

Practical Training:  Once the students have completed their formal education to operate heavy equipment, they are moved to the next level which is to impart practical training and understand the machines they would be dealing with for their entire life. This is the phase that will decide how good an operator he would be. Here, the student would be taught to work on different form of machines. An experienced teacher would be with them throughout their journey of knowing the machines. Though, they won’t be asked to work on all the machines, the teacher would see which student is good in what sort of machine and accordingly, he would be helped in mastering that piece of steel.

If the student successfully completes the training, he has high chances of getting a job via campus interviews where he needs to put his ability on display and convince the interviewers that they can’t get anyone better than him. This is how the combination of classroom training and practical training has an impact on the student that helps him develop into a class heavy equipment operator.

Find Out the Features & Utility of CAT 140 Motor Grader

Taking off snow from the road or putting aside huge logs and dump it in the truck, all these can’t be done without the help of a grader. Not only taking the snow off the roads but also it is used for moving earth. It can be widely seen in a construction or a mining site taking away huge blocks of debris or mud and dumping them in one corner. It has a long blade in the front which is used to make a flat surface. All the standard models come with 3 axels. The engine and the cab are located above the rear axle and the third one is situated near the front end of the machine. The blade is located just between them. The engines have a capacity of 125-500 hp which increases the productivity of the grader.

Having given a brief description of a grader, we would now be discussing in length about CAT 140 Motor Grader and how useful it is with respect to the construction and mining industry.

Let’s us begin with how useful it is in view to the operator. Engineers working with CAT have ensured that they pay more stress on providing high level of visibility to the operator. This is how they came up with angled cab doors, engine with tapered enclosure and slanted back window. This has helped a long way for the man inside the cabin to have an eagle’s view to things outside the box. They have also changed the control levers and steering wheel with joystick controls which facilitates the operator to work on those two things rather than keeping a count of number of switches inside the cabin. The space in the cabin has also been extended to give more room to the operator. Well, this lets him to relax inside the cabin when he’s got nothing to do.

The model 140 and its subsequent series are fitted with C9.3 ACERT engine which is considered as one of the best in the industry. This particular engine has supreme torque and significant capacity to pull things which are either sudden or short-term loads. While it does this, it can also maintain desirable grading speeds which permit it to get the work done faster without any sort of downshifting. The 140 series has been installed with “hydraulically demand fan” that automatically adjusts the cooling speed of the fan which is certainly done as per the requirements of the engine cooling system. This actually takes off the burden from the engine which allows it to use more horsepower on the ground and thus increases the efficiency of the desired job.

The brakes provided in the 140 series are hydraulic which gives more power to the brakes when they are applied. It also reduces the chances of the brakes getting deteriorated and thus increases its life. 

Overall, CAT grader 140 series is a machine with low maintenance cost, thus saves good deal of money of the owner and also consumes less fuel thereby help the company to make maximum profits.